Hollow TiO2 nanoparticles (HNPs) capped with conducting polymers, such as polythiophene (PT), polypyrrole (PPy), and polyaniline (PANI), have been studied to be used as polarizability-tunable electrorheological (ER) fluids. The hollow shape of TiO2 nanoparticles, achieved by the removal of the SiO2 template, offers colloidal dispersion stability in silicone oil owing to the high number density. Conducting polymer shells, introduced on the nanoparticle surface using vapor deposition polymerization method, improve the yield stress of the corresponding ER fluids in the order of PANI < PPy < PT. PT-HNPs exhibited the highest yield stress of ca. 94.2 Pa, which is 5.0-, 1.5-, and 9.6-times higher than that of PANI-, PPy-, and bare HNPs, respectively. The improved ER response upon tuning with polymer shells is attributed to the space charge contribution arising from the movement of the charge carriers trapped by the heterogeneous interface. The ER response of studied ER fluids is consistent with the corresponding polarizability results as indicated by the permittivity and electrophoretic mobility measurements. In conclusion, the synergistic effect of hollow nanostructures and conducting polymer capping effectively enhanced the ER performance.
14 February 2020 in Combustion Science and Technology
The present experiments focused on the response of burning gaseous fuel jets to prescribed transverse acoustic excitation as a means of exploring the coupling of reactive, acoustic, and flow processes relevant to combustion instabilities. Single reactive methane microjets were exposed to transverse resonant standing wave disturbances within an acoustic waveguide for which a range of amplitudes of excitation were applied. Temporal flame response to acoustic excitation was studied via simultaneous phase-locked OH* chemiluminescence and visible imaging, and additionally via high speed, temporally resolved visible imaging. Quantification of flame dynamics was achieved for phase-locked data via the Rayleigh and temporal flame distortion measurements, and for time-resolved data via proper orthogonal decomposition (POD) and dynamic mode decomposition (DMD). Characteristic signatures associated with various types of flame response were identified, including weakly oscillatory combustion, full-scale flame coupling and lock-in to excitation, and multi-mode flame dynamics preceding flame extinction. It was found that modal decomposition of flame dynamics via POD and DMD analysis revealed important additional dynamical features and signatures in metrics characteristic of transitions in the flame-acoustic coupling.
Surface modification of dielectric materials changes the dipole-dipole interactions under electric fields, thereby controlling the electrorheological (ER) response. The introduction of metal oxides onto mica templates and further coating of dyes is expected to simultaneously improve the color clarity and ER performance. Dye-coated TiO2 platelets on mica are synthesized for high-performance colorful ER fluids. A sol-gel method is utilized to grow TiO2 on mica to prepare precursor light-colored mica/TiO2 materials, which are coated with appropriate dyes to enhance the vividness as determined by the Commission Internationale de clairage L*a*b* color system. The color expression and color clarity improvement are explained via the light interference effect and the presence of chromophores. The uniform TiO2 layers can be obtained under low pH conditions with controlled nucleation kinetics. The addition of dyes to TiO2 increases the surface area and porosity of ER materials and introduces heteroatoms that act as positive factors. In practical ER applications, dye-coated TiO2-based ER fluids exhibit higher ER performances compared with the corresponding light-colored TiO2-based ER fluids. The vivid-colored ER fluids could provide an easy selection for a wide range of rheological systems requiring a specific magnitude of stress by confirming the color.