The characteristics and diclofenac adsorption properties of a carbon adsorbent prepared from palm kernel shells were studied. The adsorbent prepared via hydrothermal carbonization followed by an activation in nitrogen flow had a mesoporous structure with homogenous pore distribution and the specific surface area of 131 m2g−1. The Raman spectra showed a formation of graphene or graphite structures in the material during activation with small number of defects based on its ID/IGratio of about 0.5. The FTIR analysis showed both a qualitative and quantitative decrease in the functional groups of the raw material after activation. The developed adsorbent was found to be effective in the removal of diclofenac with 95% maximum removal at pH 2, adsorbent dose of 15 gL−1and adsorbate dose of 50 mgL−1. Diclofenac adsorption followed the Langmuir isotherm model with correlation coefficient R2 > 0.98. The adsorption kinetics was explained by the second-order kinetic model with rate constant (K2) 0.869 min−1. The interaction via aromatic π–π stacking and hydrogen bonding between -OH groups of phenol and carboxylic acid groups of DCF are leading to a good adsorption efficiency despite of the low surface area of the adsorbent.Graphic
Metal halide perovskites have emerged as novel and promising photocatalysts for hydrogen generation. Currently, their stability in water is a vital and urgent research question. In this paper a novel approach to stabilize a bismuth halide perovskite [(CH3)2NH2]3[BiI6] (DA3BiI6) in water using dimethylammonium iodide (DAI) without the assistance of acids or coatings is reported. The DA3BiI6 powder exhibits good stability in DAI solutions for at least two weeks. The concentration of DAI is found as a critical parameter, where the I- ions play the key role in the stabilization. The stability of DA3BiI6 in water is realized via a surface dissolution–recrystallization process. Stabilized DA3BiI6 demonstrates constant photocatalytic properties for visible light-induced photo-oxidation of I- ions and with PtCl4 as a co-catalyst (Pt-DA3BiI6), photocatalytic H2 evolution with a rate of 5.7 μmol⋅h-1 from HI in DAI solution, obtaining an apparent quantum efficiency of 0.83% at 535 nm. This study provides new insights on the stabilization of metal halide perovskites for photocatalysis in aqueous solution.
The treatment of volatile organic compounds (VOC) emissions is a necessity of today. The catalytic treatment has already proven to be environmentally and economically sound technology for the total oxidation of the VOCs. However, in certain cases, it may also become economical to utilize these emissions in some profitable way. Currently, the most common way to utilize the VOC emissions is their use in energy production. However, interesting possibilities are arising from the usage of VOCs in hydrogen and syngas production. Production of chemicals from VOC emissions is still mainly at the research stage. However, few commercial examples exist. This review will summarize the commercially existing VOC utilization possibilities, present the utilization applications that are in the research stage and introduce some novel ideas related to the catalytic utilization possibilities of the VOC emissions. In general, there exist a vast number of possibilities for VOC utilization via different catalytic processes, which creates also a good research potential for the future.
9 October 2023 in Journal of Materials Chemistry A
This review summarizes recent approaches for stabilizing metal halide perovskites in water, including surface engineering, common-ion effect, and intrinsic water stability as well as their photocatalytic applications.