Compression tests at low strains were performed to theoretically analyze the effects of anisotropic elasticity, misorientation, grain boundary (GB) stiffness, interfacial dislocations, free surfaces, and critical force on dislocation pile-ups in micro-sized Face-Centered Cubic (FCC) Nickel (Ni) and -Brass bi-crystals. The spatial variations of slip heights due to localized slip bands terminating at GB were measured by Atomic Force Microscopy (AFM) to determine the Burgers vector distributions in the dislocation pile-ups. These distributions were then simulated by discrete pile-up micromechanical calculations in anisotropic bi-crystals consistent with the experimentally measured material parameters. The computations were based on the image decomposition method considering the effects of interphase GB and free surfaces in multilayered materials. For Ni and -Brass, it was found that the best predicted step height spatial profiles were obtained considering anisotropic elasticity, free surface effects, a homogeneous external stress and a certain critical force in the material to equilibrate the dislocation pile-ups.
In this work, numerical computations of image forces and stored energy during the growth of a strain free grain within a recovered matrix containing an array of identical dislocations are performed. A decrease of the stored energy is observed when image forces are attractive and an increase when image forces are repulsive. The variation of elastic energy depends closely on the material elastic anisotropy, the number of dislocations in the array and its initial distance to grain boundary. For an array of 20 edge dislocations and the motion of a planar grain boundary over approximately 180 atomic spacing, the magnitude of the energy variation is on the order of one dislocation line energy for Al and six for Cu, which is significant in both cases. Furthermore, by sweeping the whole orientation space for FCC crystals, it is shown that grain boundaries near a misorientation are among those that can display the highest attractive forces on edge dislocations. Since grain boundary migration is driven by the reduction of stored energy, the results are analysed in light of experimental recrystallization data in FCC metals which show that the fastest moving boundaries are often characterised by misorientation axis around and misorientation angle close to .
14 January 2023 in Materials Science and Engineering: A