Mango by-products are important sources of bioactive compounds generated by agro-industrial process. During mango processing, 35–60% of the fruit is discarded, in many cases without treatment, generating environmental problems and economic losses. These wastes are constituted by peels and seeds (tegument and kernel). The aim of this review was to describe the extraction, identification, and quantification of bioactive compounds, as well as their potential applications, published in the last ten years. The main bioactive compounds in mango by-products are polyphenols and carotenoids, among others. Polyphenols are known for their high antioxidant and antimicrobial activities. Carotenoids show provitamin A and antioxidant activity. Among the mango by-products, the kernel has been studied more than tegument and peels because of the proportion and composition. The kernel represents 45–85% of the seed. The main bioactive components reported for the kernel are gallic, caffeic, cinnamic, tannic, and chlorogenic acids; methyl and ethyl gallates; mangiferin, rutin, hesperidin, and gallotannins; and penta-O-galloyl-glucoside and rhamnetin-3-[6-2-butenoil-hexoside]. Meanwhile, gallic acid, ferulic acid, and catechin are reported for mango peel. Although most of the reports are at the laboratory level, they include potential applications in the fields of food, active packaging, oil and fat, and pharmaceutics. At the market level, two trends will stimulate the industrial production of bioactive compounds from mango by-products: the increasing demand for industrialized fruit products (that will increase the by-products) and the increase in the consumption of bioactive ingredients.

Quantitative analysis of carotenoids has been extensively reported using UV-Vis spectrophotometry and chromatography, instrumental techniques that require complex extraction protocols with organic solvents. Fourier transform infrared spectroscopy (FTIR) is a potential alternative for simplifying the analysis of food constituents. In this work, the application of FTIR with attenuated total reflectance (ATR) was evaluated for the determination of total carotenoid content (TCC) in Cucurbita spp. samples. Sixty-three samples, belonging to different cultivars of butternut squash (C. moschata) and pumpkin (C. maxima), were selected and analyzed with FTIR- ATR (attenuated total reflectance). Three different preparation protocols for samples were followed: homogenization (A), freeze-drying (B), and solvent extraction (C). The recorded spectra were used to develop regression models by Partial Least Squares (PLS), using data from TCC, determined by UV-Vis spectrophotometry. The PLS regression model obtained with the FTIR data from the freeze-dried samples, using the spectral range 920–3000 cm⁻¹, had the best figures of merit (R²_CAL of 0.95, R²_PRED of 0.93 and RPD of 3.78), being reliable for future application in agriculture. This approach for carotenoid determination in pumpkin and squash avoids the use of organic solvents. Moreover, these results are a rationale for further exploring this technique for the assessment of specific carotenoids in food matrices.

The growing demand for cellulosic pulp presents an opportunity to explore alternatives to this material, focusing on utilizing agro-industrial residues. Mango’s tegument is a rich source of cellulose, making it a valuable raw material for manufacturing single-use articles or blends with biopolymers. In this sense, employing conventional alkaline and acid chemical treatments, the mango’s tegument was treated to obtain cellulosic pulp. The teguments were subjected to treatment with alkaline solutions (2% and 4% NaOH w/v) at 80 °C for 1 or 2 h or with an acetic acid solution (1:1 or 1:2 CH₃COOH:H₂O₂) at 60–70 °C for 1 or 2 h. After treatment, an evaluation was conducted to assess the yield, color, chemical analysis, and structural, thermal, and morphological properties. The alkali treatments produced cellulosic pulps with a light color with 37–42% yield and reduced hemicellulose content. The acid treatments produced orange–brown cellulosic pulp with 47–48% yield and higher hemicellulose content. The acid pulps were thermally more stable (maximum decomposition at 348–357 °C) than the alkali pulps (maximum decomposition at 316–321 °C). The crystallinity index demonstrated that both treatments increased the crystallinity of the cellulose pulps compared with the untreated tegument. The thermal stability of cellulosic pulp at the processing temperatures of disposable tableware (50–120 °C) revealed that plates, bowls, trays, and cups could be produced. Another potential application is as a component of blends with biopolymers to make straws or rigid food packaging (trays) with reinforced structures.

The interest about probiotic bacteria supplementation in fruit beverages has been increased recently in order to develop functional beverages without lactose. That is a technological challenge since pH and storage temperature can affect their viability. The aim of this study was to evaluate the viability of three commercial probiotic strains (L. paracasei, L. casei and L. rhamnosus) in mango beverage stored at 4°C. This research was developed in three stages: the assessment of the acid strain tolerance, the selection of a prebiotic as cellular protectant against environmental stress, the evaluation of physiochemical and sensory stability during storage. L. casei was chosen as the most stable strain with FOS at 5% as a prebiotic substance that stimulated its growth. At the final stage, it was found that L. casei produced significant changes in pH and titratable acidity in mango beverages after one week at 4°C, which was also detected by consumers with good sensory acceptance

Current mango production exceeds 40 million tons, which generates co-products that need to be exploited and valorized. The objective of this study was to obtain cellulosic pulp by applying an alkaline treatment to mango tegument from agroindustrial waste of the “Keitt” and “Kent” varieties for the development of single-use plates. The study was divided into three phases: (1) characterization of the mango tegument, measuring moisture and morphological parameters of the fibers; (2) obtaining cellulosic pulp with alkaline treatment; and (3) characterization of the developed prototypes with analysis of grease resistance, water absorption capacity, and mechanical properties. It was found that the morphological parameters of fiber length and diameter of the Keitt mango tegument were 934 ± 123 μm and 15.57 ± 2.90 μm, while for Kent, they were 1,048 ± 163 μm and 18.35 ± 4.25 μm, respectively. The tensile mechanical properties of the prototypes made from the Kent variety were superior to those of the Keitt and pine (reference) varieties. The water and grease absorption resistance properties that the prototypes exhibited were low, highlighting the importance of continued research to improve these aspects. However, the development of prototypes showed a potential for the valorization of mango waste, contributing to reducing the consumption of single-use plastics and generating other alternatives for their use.

Recent studies have shown that using conventional plastics to produce disposable tableware significantly impacts the environment. Alternatively, using cellulosic pulp from harnessing agro-industrial wastes, such as mango, provides a unique opportunity to create eco-friendly and biodegradable disposable tableware, a high-volume single-use item. Cellulosic pulp from the tegument of mango (cultivar Tommy Atkins) was successfully obtained by a semichemical pulping process to manufacture biodegradable plates. Refining times of 0, 5, 10, and 15 min were tested, and it was observed that a refining time of 10 min yielded a notably stronger material of 2.15 km in breaking length. Moreover, when the mango fibers were blended with pine fibers in a 70:30 (mango/pine) ratio, the material’s porosity significantly improved from 0 to 0.60 s/100 cc air. Alkyl ketene dimer at 1.5% was incorporated to impart water-resistant properties, changing the contact angle drop test from 0 to >120°. The biodegradation test indicated that the samples achieved a significant biodegradation level of 62.14 and 67.65 after 182 days of testing. The results demonstrated that the tegument from mango agro-industrial waste has the potential to be a source of cellulosic pulp to produce biodegradable and disposable tableware, contributing to the decrease in the use of conventional plastics.