The primary requirement for the development of tools for extreme ultraviolet lithography (EUVL) has been the identification and optimization of suitable sources. These sources must be capable of producing hundreds of watts of extreme ultraviolet (EUV) radiation within a wavelength bandwidth of 2% centred on 13.5 nm, based on the availability of Mo/Si multilayer mirrors (MLMs) with a reflectivity of ∼70% at this wavelength. Since, with the exception of large scale facilities, such as free electron lasers, such radiation is only emitted from plasmas containing moderately to highly charged ions, the source development prompted a large volume of studies of laser produced and discharge plasmas in order to identify which ions were the strongest emitters at this wavelength and the plasma conditions under which their emission was optimized. It quickly emerged that transitions of the type 4p 6 4d n − 4p 5 4d n
+1
+ 4d n
−1
4f in the spectra of Sn IX to SnXIV were the best candidates and work is still ongoing to establish the plasma conditions under which their emission at 13.5 nm is maximized. In addition, development of other sources at 6. X nm, where X ∼ 0.7, has been identified as the wavelength of choice for so-called Beyond EUVL (BEUVL), based on the availability of La/B based MLMs, with theoretical reflectance approaching 80% at this wavelength. Laser produced plasmas of Gd and Tb have been identified as potential source elements, as n = 4 − n = 4 transitions in their ions emit strongly near this wavelength. However to date, the highest conversion efficiency (CE) obtained, for laser to BEUV energy emitted within the 0.6% wavelength bandwidth of the available mirrors is only 0.8%, compared with values of 5% for the 2% bandwidth relevant for the Mo/Si mirrors at 13.5 nm. This suggests a need to identify other potential sources or the selection of other wavelengths for BEUVL. This review deals with the atomic physics of the highly-charged ions relevant to EUV emission at these wavelengths. It considers the developments that have contributed to the realization of the 5% CE at 13.5 nm which underpins the production of high-volume lithography tools, and those that will be required to realize BEUV lithography.
We have demonstrated a laser-produced plasma extreme ultraviolet source operating in the 6.5–6.7 nm region based on rare-earth targets of Gd and Tb coupled with a Mo/B4C multilayer mirror. Multiply charged ions produce strong resonance emission lines, which combine to yield an intense unresolved transition array. The spectra of these resonant lines around 6.7 nm (in-band: 6.7 nm ±1%) suggest that the in-band emission increases with increased plasma volume by suppressing the plasma hydrodynamic expansion loss at an electron temperature of about 50 eV, resulting in maximized emission.
We demonstrate a table-top broadband emission water window source based on laser-produced high-Z plasmas. Resonance emission from multiply charged ions merges to produce intense unresolved transition arrays (UTAs) in the 2–4 nm region, extending below the carbon K edge (4.37 nm). Arrays resulting from n=4-n=4 transitions are overlaid with n=4-n=5 emission and shift to shorter wavelength with increasing atomic number. An outline of a microscope design for single-shot live cell imaging is proposed based on a bismuth plasma UTA source, coupled to multilayer mirror optics.
14 March 2001 in Journal of Physics B: Atomic, Molecular and Optical Physics
An examination of the influence of target composition and viewing angle on the extreme ultraviolet spectra of laser produced plasmas formed from tin and tin doped planar targets is reported. Spectra have been recorded in the 9–17nm region from plasmas created by a 700mJ, 15ns full width at half maximum intensity, 1064nm Nd:YAG laser pulse using an absolutely calibrated 0.25m grazing incidence vacuum spectrograph. The influence of absorption by tin ions (SnI–SnX) in the plasma is clearly seen in the shape of the peak feature at 13.5nm, while the density of tin ions in the target is also seen to influence the level of radiation in the 9–17nm region.
One key aspect in the drive to optimize the radiative output of a laser-produced plasma for extreme ultraviolet lithography is the radiation transport through the plasma. In tin-based plasmas, the radiation in the 2% bandwidth at 13.5 nm is predominantly due to and transitions from a range of tin ions ( to ). The complexity of the configurations involved in these transitions is such that a line-by-line analysis is, computationally, extremely intensive. This work seeks to model the emission profiles of each ion by treating the transition arrays statistically, thus greatly simplifying radiation transport modeling. The results of the model are compared with experimental spectra from tin-based laser-produced plasmas.