Two-color multiphoton ionization of atomic helium was investigated by combining extreme ultraviolet (XUV) radiation from the Free Electron Laser in Hamburg with an intense synchronized optical laser. In the photoelectron spectrum, lines associated with direct ionization and above-threshold ionization show strong variations of their amplitudes as a function of both the intensity of the optical dressing field and the relative orientation of the linear polarization vectors of the two fields. The polarization dependence provides direct insight into the symmetry of the outgoing electrons in above-threshold ionization. In the high field regime, the monochromaticity of the XUV radiation enables the unperturbed observation of nonlinear processes in the optical field.
One key aspect in the drive to optimize the radiative output of a laser-produced plasma for extreme ultraviolet lithography is the radiation transport through the plasma. In tin-based plasmas, the radiation in the 2% bandwidth at 13.5 nm is predominantly due to and transitions from a range of tin ions ( to ). The complexity of the configurations involved in these transitions is such that a line-by-line analysis is, computationally, extremely intensive. This work seeks to model the emission profiles of each ion by treating the transition arrays statistically, thus greatly simplifying radiation transport modeling. The results of the model are compared with experimental spectra from tin-based laser-produced plasmas.
Using a noninvasive, electro-optically based electron bunch arrival time measurement at FLASH (free electron laser in Hamburg) the temporal resolution of two-color pump-probe experiments has been significantly improved. The system determines the relative arrival time of the extended ultraviolet pulse of FLASH and an amplified Ti:sapphire femtosecond-laser pulse at the interaction region better than 90 fs rms. In a benchmarking pump-probe experiment using two-color above threshold ionization of noble gases, an enhancement in the timing resolution by a factor of 4 compared to the uncorrected data is obtained.
Extreme ultraviolet lithography requires a light source at to match the proposed multilayer optics reflectivity. The impact of wavelength and power density on the ion distribution and electron temperature in a laser-produced plasma is calculated for Nd:YAG and lasers. A steady-state figure of merit, calculated to optimize emission as a function of laser wavelength, shows an increase with a laser. The influence of reduced electron density in the laser-produced plasma is considered in a one-dimensional radiation transport model, where a more than twofold increase in conversion efficiency over that attainable with the Nd:YAG is predicted.
One of fundamental aims of extreme ultraviolet (EUV) lithography is to maximize brightness or conversion efficiency of laser energy to radiation at specific wavelengths from laser produced plasmas (LPPs) of specific elements for matching to available multilayer optical systems. Tin LPPs have been chosen for operation at a wavelength of 13.5 nm. For an investigation of EUV radiation of laser-produced tin plasmas, it is crucial to study the related atomic processes and their evolution so as to reliably predict the optimum plasma and experimental conditions. Here, we present a simplified radiation hydrodynamic model based on the fluid dynamic equations and the radiative transfer equation to rapidly investigate the evolution of radiation properties and dynamics in laser-produced tin plasmas. The self-absorption features of EUV spectra measured at an angle of 45° to the direction of plasma expansion have been successfully simulated and explained, and the evolution of some parameters, such as the plasma temperature, ion distribution and density, expansion size and velocity, have also been evaluated. Our results should be useful for further understanding of current research on extreme ultraviolet and soft X-ray source development for applications such as lithography, metrology and biological imaging.