Ammonia (NH₃) is an attractive low-carbon fuel and hydrogen carrier. However, losses and inefficiencies across the value chain could result in reactive nitrogen emissions (NH₃, NO_x, and N₂O), negatively impacting air quality, the environment, human health, and climate. A relatively robust ammonia economy (30 EJ/y) could perturb the global nitrogen cycle by up to 65 Mt/y with a 5% nitrogen loss rate, equivalent to 50% of the current global perturbation caused by fertilizers. Moreover, the emission rate of nitrous oxide (N₂O), a potent greenhouse gas and ozone-depleting molecule, determines whether ammonia combustion has a greenhouse footprint comparable to renewable energy sources or higher than coal (100 to 1,400 gCO₂e/kWh). The success of the ammonia economy hence hinges on adopting optimal practices and technologies that minimize reactive nitrogen emissions. We discuss how this constraint should be included in the ongoing broad engineering research to reduce environmental concerns and prevent the lock-in of high-leakage practices.

The computational modeling of soot in aircraft engines is a formidable challenge, not only due to the multiscale interactions with the turbulent combustion process but the equally complex physical and chemical processes that drive the conversion of gas-phase fuel molecules into solid-phase particles. In particular, soot formation is highly sensitive to the gas-phase composition and temporal fluctuations in a turbulent background flow. In this work, a large-eddy simulation (LES) framework is used to study the soot formation in a model aircraft combustor with swirl-based fuel and air injection. Two different configurations are simulated: one with and one without secondary oxidation jets. Specific attention is paid to the LES numerical implementation such that the discrete solver minimizes the dissipation of kinetic energy. Simulation of the model combustor shows that the LES approach captures the two recirculation zones necessary for flame stabilization very accurately. Further, the model reasonably predicts the temperature profiles inside the combustor. The model also captures variation in soot volume fraction with global equivalence ratio. The structure of the soot field suggests that when secondary oxidation jets are present, the inner recirculation region becomes fuel lean, and soot generation is completely suppressed. Further, the soot field is highly intermittent suggesting that a very restrictive set of gas-phase conditions promotes soot generation.