Excessive land application of poultry litter (PL) may lead to surface runoff of nitrogen (N) and phosphorus (P), which cause eutrophication, fish death, and water pollution that ultimately have negative effects on humans and animals. Increases in poultry production in the Delmarva Peninsula underscore the need for more efficient, cost-effective, and sustainable disposal technologies for processing PL instead of direct land application. The pyrolysis conversion process can potentially produce nutrient-rich poultry litter biochar (PLB), while the pyrolysis process can change the N and P to a more stable component, thus reducing its runoff. Pyrolysis also kills off any microorganisms that would otherwise trigger negative environmental health effects. This study is to apply an integrated method and investigate the effect of pyrolysis temperature (300 °C, 500 °C), poultry litter source (different feedstock composition), and bedding material mixture (10% pine shavings) on PLB qualities and quantities. Proximate and ultimate analysis showed PL sources and bedding material addition influenced the physicochemical properties of feedstock. The SEM and BET surface results indicate that pyrolysis temperature had a significant effect on changing the PLB morphology and structure, as well as the pH value (7.78 at 300 °C vs. 8.78 at 500 °C), extractable phosphorus (P) (18.73 ppm at 300 °C vs. 11.72 ppm at 500 °C), sulfur (S) (363 ppm at 300 °C vs. 344 ppm at 500 °C), and production yield of PLBs (47.65% at 300 °C vs. 60.62% at 500 °C). The results further suggest that adding a bedding material mixture (10% pine shavings) to PLs improved qualities by reducing the content of extractable P and S, as well as pH values of PLBs. This study also found the increment in both the pore volume and the area of Bethel Farm was higher than that of Sun Farm. Characterization and investigation of qualities and quantities of PLB using the integrated framework suggest that PL from Bethel Farm could produce better-quality PLB at a higher pyrolysis temperature and bedding material mixture to control N and P runoff problems.

Over the past few decades, there has been a notable surge in interest in green stormwater infrastructure (GSI). This trend is a result of the need to effectively address issues related to runoff, pollution, and the adverse effects of urbanization and impervious surfaces on waterways. Concurrently, umanned aerial vehicles (UAVs) have gained prominence across applications, including photogrammetry, military applications, precision farming, agricultural land, forestry, environmental surveillance, remote-sensing, and infrastructure maintenance. Despite the widespread use of GSI and UAV technologies, there remains a glaring gap in research focused on the evaluation and maintenance of the GSIs using UAV-based imagery. This study aimed to develop an integrated framework to evaluate plant density and health within GSIs using UAV-based imagery. This integrated framework incorporated the UAV (commonly known as a drone), WebOpenDroneMap (WebDOM), ArcMap, PyCharm, and the Canopeo application. The UAV-based images of GSI components, encompassing trees, grass, soil, and unhealthy trees, as well as entire GSIs (e.g., bioretention and green roofs) within the Morgan State University (MSU) campus were collected, processed, and analyzed using this integrated framework. Results indicated that the framework yielded highly accurate predictions of plant density with a high R² value of 95.8% and lower estimation errors of between 3.9% and 9.7%. Plant density was observed to vary between 63.63% and 75.30% in the GSIs at the MSU campus, potentially attributable to the different types of GSI, varying facility ages, and inadequate maintenance. Normalized difference vegetation index (NDVI) maps and scales of two GSIs were also generated to evaluate plant health. The NDVI and plant density results can be used to suggest where new plants can be added and to provide proper maintenance to achieve proper functions within the GSIs. This study provides a framework for evaluating plant performance within the GSIs using the collected UAV-based imagery.

Biochar, a carbon-rich material produced through pyrolysis of biomass under limited oxygen conditions, offers a potentially sustainable and cost-competitive solution (qualitative assessment; quantitative LCA and techno-economic data are beyond the scope of this review) for the removal of heavy metals from wastewater. Its high porosity, surface area, and surface functional groups enable diverse adsorption mechanisms, including complexation, ion exchange, and precipitation. Feedstock selection and production parameters critically influence biochar’s physicochemical properties and adsorption performance. Modification techniques such as chemical functionalization, metal impregnation, and composite formation enhance removal efficiency and selectivity for specific contaminants. Applications span industrial, municipal, and agricultural wastewaters, addressing multi-contaminant challenges under variable environmental conditions. Factors affecting removal efficiency include pH, temperature, contaminant concentration, and competing ions, while regeneration methods are essential for maintaining long-term functionality and are discussed. Biochar can be reused and regenerated using bases and acids, but environmental risks related to biochar use, including potential contaminant leaching and ecological impacts, require careful management and regulatory compliance. Future research should focus on novel modification strategies, scaling production for industrial use, and optimizing integration within treatment systems to meet stringent discharge standards and promote sustainable water management.