In this work, the numerical and experimental investigation of the cladding modes re-organization in high refractive index (HRI) coated Long Period Gratings (LPGs) is reported. Moreover, the effects of the cladding modes re-organization on the sensitivity to the surrounding medium refractive index (SRI) have been outlined. When azimuthally symmetric nano-scale HRI coatings are deposited along LPGs devices, a significant modification of the cladding modes distribution occurs, depending on the layer features (refractive index and thickness) and on the SRI. In particular, if layer parameters are properly chosen, the transition of the lowest order cladding mode into an overlay mode occurs. As a consequence, a cladding modes re-organization can be observed leading to relevant improvements in the SRI sensitivity in terms of wavelength shift and amplitude variations of the LPGs attenuation bands.

In this work, highly sensitive refractive index measurements have been experimentally demonstrated by using thinned fiber Bragg grating (FBG) sensors. When the cladding diameter is reduced, significant changes in the effective refractive index occur due to surrounding medium refractive index modifications, leading to Bragg wavelength shifts. Uniformly thinned FBGs have been obtained by using wet chemical etching in hydrofluoric acid solutions. In order to prove sensor sensitivity, experimental tests have been carried out by using glycerine solutions with well-known refractive indices. Obtained results agree well with the numerical analysis carried out by using the three-layer fiber model. If the cladding layer is completely removed, resolutions of /spl ap/10/sup -5/ and /spl ap/10/sup -4/ for the outer refractive index around 1.450 and 1.333, respectively, are possible. Finally, a novel approach based on the selective etching along the grating region has been analyzed, leading to high-sensitivity refractive index sensors based on intensity measurements.

Fiber optic label-free biosensors are currently experiencing wide diffusion, as they combine the performance of optical measurements with the advantages of optical fiber. This paper presents a comprehensive review about the design, development and testing of biosensor solutions based on in-fiber long period gratings (LPG). The attention is focused on optical transducers and methodologies allowing a significant enhancement of the sensitivity. Moreover, coating nanomaterials, biofunctionalization strategies and recognition elements providing the selectivity to the target analyte are reported in detail. The aim is to provide a detailed review concerning the state of the art about LPG-based label-free biosensors and to outline the future research trends.

In this work, an all-fiber high-resolution refractive index sensor based on a microstructured fiber Bragg grating is presented. The proposed structure relies on a partial and localized etching of the cladding layer along a standard grating. The main spectral changes of the structured grating are the increasing of the stopband and the formation of a narrow allowed band strongly dependent on the etching features and the surrounding refractive index. A sensor prototype has been fabricated by using wet etching and a proper masking procedure; experimental results reveal the possibility to carry out low-cost refractive index measurements with a resolution of 4/spl middot/10/sup -5/.

We theoretically and experimentally investigated the reorganization of cladding modes in high-refractive-index- (HRI-) coated long-period gratings (LPGs), focusing on the influence of refractive-index sensitivity. When azimuthally symmetric nanoscale HRI coatings are deposited along LPG devices, a significant modification of the distribution of cladding modes occurs, depending on the layers’ features (refractive index and thickness) and on the external refractive index. In particular, if these parameters are properly chosen, a transition between cladding modes and overlay modes occurs. Numerical and experimental effects of the mode transition on the sensitivity of the surrounding refractive index are described.

A critical issue in practical structural health monitoring is related to the capability of proper sensing systems integrated within the host structures to detect, identify, and localize damage generation. To this aim, many techniques have been proposed involving dynamic measurements such as modal analysis, acoustic emission, and ultrasonics. This paper relies on the use of embedded fiber Bragg grating sensors for performing an experimental modal analysis on a wing of an aircraft model. Time domain response of the embedded fiber-optic sensors induced by hammer impacts were acquired and transformed into the frequency domain. Using a classical technique based on the frequency transfer function, the first displacement and strain mode shapes of the wing have been retrieved in terms of natural frequencies and amplitudes. Experimental results confirm the excellent performances of this class of sensing devices to determine the modal behavior within complex structures compared with conventional accelerometer-based detection systems.