In order to evaluate the groundwater resources and aquifer system of the Jilin urban area (JUA), a groundwater numerical flow model was established by using the groundwater modeling system based on data from 190 boreholes. River stages were interpolated to control the groundwater flow field. The input parameters such as hydraulic conductivity and specific yield were based on data from 260 pumping test data. The model was calibrated by trial and error, simulated results were compared to the observed head and contour maps, which were generally in good agreement, and the root mean squared error was 0.66 m. Sensitivity analysis was carried out and recharge proved to be the most sensitive factor in this model. The water budget showed that the input was 2.07× 108 m3/a, which was smaller than the output of 2.21 × 108 m3/a. A groundwater level decline and cone of depression exist in the Songhua and Aolong river valley. The JUA aquifer systems can be well and efficiently modeled by constructing a numerical model. Based on the supply and demand analysis of water resources, the established model would finally provide a scientific basis to use the groundwater resources sustainably in JUA.
Oil shale has received attention as an alternative energy source to petroleum because of its abundant reserves. Exploitation of oil shale can be divided into two types: ex situ and in situ exploitation. In situ transformation has been favoured because of its various advantages. Heating of oil shale leads to the production of oil and gas. To explore the influence of solid residue after pyrolysis of oil shale on the groundwater environment, we performed ultrapure water–rock interaction experiments. The results showed that Pb tended to accumulate in solid residues during pyrolysis. Additionally, the Pb concentration goes up in the immersion solution over time and as the pyrolysis temperature increased. In contrast, when we measured the soaking data of benzene series, the concentrations of benzene and toluene produced at temperatures over 350 ℃ were highest in the four oil shale pyrolysis samples after pyrolysis. The water–rock interaction experiment for 30 days led to benzene and toluene concentrations that were 104 and 1070-fold over the limit of China’s standards for groundwater quality. Over time, the content of benzene series was attenuated via biological actions. The results show that in situ oil shale mining can lead to continuous pollution in the groundwater environment.