Weiyu Li

Dr. Weiyu Li

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 August 2023 in Energy Science & Engineering
Verified
Journal Article
Open access
WLWeiyu Li
Weiyu Li
SFShizheng Fang
Shizheng Fang
XGXin Gao
Xin Gao
YHYidan Han
Yidan Han
A method of determining rock damage variable from wave impedance, which is suitable for the study of dynamics, is presented. The determined variable provides a more reasonable quantitative description of the degree of rock damage. First, the Taylor model of mesoscopic damage mechanics is used to derive the relationship between the velocity of longitudinal waves and the density of rock materials. Based on the measured data of rock samples with different lithology and the same lithology, the relationship between the longitudinal wave velocity and density of rock materials is studied. It is demonstrated that using the wave impedance to define the rock damage variable has advantages over using the P‐wave velocity. Second, the relationship between the wave impedance and degree of damage to the rock material is studied using an electron microscope and ultrasonic testing technology, and the microstructure of rock samples with a wave impedance gradient and time–frequency‐domain characteristics of the ultrasonic signals are compared and analyzed. It is found that it is feasible to determine the damage degree of the rock from the wave impedance. Finally, a method of defining rock damage variable with the wave impedance is further proposed and its rationality verified. The research results show that there is a good positive correlation between the longitudinal wave velocity and density of rock materials, and there is a strong correlation between the degree of rock damage and its wave impedance. The damage variable defined by wave impedance can better reflect the damage state and damage evolution process of rock.

10 October 2020 in Shock and Vibration
Verified
Journal Article
Open access
PDF file
RYRenshu Yang
Renshu Yang
WLWeiyu Li
Weiyu Li
ZYZhongwen Yue
Zhongwen Yue
Geological conditions are often complex during rock engineering construction (such as blasting and drilling) and usually involve rocks of several or multiple lithologies. However, comparative studies on the dynamic mechanical response of rocks of different lithologies are relatively few. To study differences in dynamic mechanical properties and energy dissipation of rocks of different lithologies, three kinds of rock that are common in rock engineering and have large differences in wave impedance were selected: red sandstone, gray sandstone, and granite. Samples of these three rocks were subjected to impact compression tests at different impact speeds, and the rock fragments after impact compression were screened to quantify the degree of fragmentation. The characteristics of stress wave propagation, dynamic stress-strain relationships, degree of fragmentation, and energy dissipation laws of the three rock types were compared and studied. The results show the following: (1) affected by the wave impedance matching relationship, the reflected waves, strain rates, and reflected energy of the three kinds of rock showed significant differences under the same incident stress wave. (2) The dynamic mechanical characteristics and energy dissipation laws of the rocks all had obvious strain rate effects, but the dynamic uniaxial compressive strength and energy dissipation density of the three rock types had different sensitivities to the strain rate. (3) The change trend of the energy utilization efficiency of the gray sandstone with incident energy was different from that of the red sandstone and granite; there was no obvious extreme point in the incident energy range. The three kinds of rock required different incident energies to reach maximum energy utilization efficiency. (4) The equivalent average fragment size of the three rock types decreased as a function of power with increasing impact velocity and energy dissipation density. (5) Under the same incident wave, although the reflection energy, transmission energy, and degree of fragmentation of the three kinds of rock showed significant differences, the differences in dissipation energy were small.

6 April 2023 in Energy Science & Engineering
Verified
Journal Article
Open access
YZYe Zhu
Ye Zhu
XHXin‐Zhu Hua
Xin‐Zhu Hua
YLYong‐Liang Li
Yong‐Liang Li
WLWeiyu Li
Weiyu Li
KYKe Yang
Ke Yang
Given the deformation and instability of the layered floor of weakly cemented soft rock roadway, taking the mining roadway of Meihuajing Mine as the engineering background, the deformation and instability mechanism of the floor and the control measures of the surrounding rock under different stratum combination conditions are studied by using the methods of field investigation, numerical calculation and field test. The results show that: (1) the layered characteristics of surrounding rock in weakly cemented soft rock roadways are significant, and the combination structure of floor rock strata is complex and changeable. Under the influence of engineering disturbance, the roadway has a tendency of large deformation, especially floor heave. (2) The buckling instability of the layered floor is caused by the layered weakening effect, and the unstable zone, the substable zone and the stable zone are formed successively from the shallow to the deep. With the increase of the layer thickness, the integrity of the layered floor is improved, the layered weakening effect is reduced, and the overall stability of the layered floor is improved. (3) The existence of weak interlayer further degrades the integrity of layered floor, and the progressive failure of floor rock mass layer by layer is more significant under the influence of layered weakening effect. (4) The relatively hard rock stratum in the composite structure plays an important role in controlling the deformation and failure of the floor, playing the role of “local key stratum.” (5) Based on the cooperative control countermeasure of roof–rib–floor surrounding rock, the support technology of roof and ribs supported by blots mesh beam cable + floor supported by bolts grouting hardening + full section shotcrete is proposed. The results of numerical calculation and field test show that the support scheme greatly improves the stability of layered floor.

2 November 2023 in ACS Omega
Verified
Journal Article
Open access
WLWeiyu Li
Weiyu Li
SFShizheng Fang
Shizheng Fang
XGXin Gao
Xin Gao
Wave impedance is an important physical quantity to characterize the dynamic properties of materials. To explore the influence of wave impedance on the dynamic mechanical response of rock, the granite samples with a wave impedance gradient change are obtained by changing the heating temperature, and the impact compression test is carried out by using a split Hopkinson pressure bar (SHPB) device. The stress wave propagation law, dynamic stress-strain relationship, and fracture characteristics of rocks with different wave impedances are studied comparatively, and the influence mechanism of wave impedance on the dynamic mechanical response of rocks is comprehensively analyzed from two aspects of material properties and dynamics. The results show the following: (1) Under the action of the same incident wave, the reflected wave amplitude, transmission wave takeoff time, peak stress, peak strain, and equivalent average size of fragments of granite samples with different wave impedances are significantly different. (2) As the heating temperature increases, the wave impedance of granite continuously decreases and the degree of damage intensifies. Within the high-temperature treatment range of 400 to 600 degrees C, there is a damage wave impedance threshold between 7854 and 3081 g center dot cm(-3)center dot m center dot s(-1). Below this wave impedance, granite will appear to have significant damage deterioration. (3) Under the same incident wave, the strain rate and loading rate of granite samples show negative correlation and positive correlation with wave impedance, respectively. There is a progressive relationship between rock wave impedance, stress wave propagation, strain rate history/stress history, and dynamic mechanical response.

5 February 2025 in Geotechnical and Geological Engineering
Verified
Journal Article
Closed access
PDF file
WLWeiyu Li
Weiyu Li
SFShizheng Fang
Shizheng Fang
YZYe Zhu
Ye Zhu
GLGuangming Li
Guangming Li

4 April 2023 in Shock and Vibration
Verified
Journal Article
Open access
PDF file
YZYe Zhu
Ye Zhu
XHXinzhu Hua
Xinzhu Hua
WLWeiyu Li
Weiyu Li
Driven by the high original rock stress and engineering disturbance, the ultrahigh roadways of about 7∼8 m appear in the deep coal mine. Based on the field measured data, the stability in different zones of roof and rib is divided. From shallow to deep, the roof forms potential leakage and falling zone, metastable zone, and stable zone, and the coal rib forms potential spalling zone, crack developed zone, and transition zone. Based on the theory of transverse isotropy, the mechanical analysis model of layered roof is established, the real stress state at any point of layered roof is deduced, the roof failure criterion is constructed, and the theoretical solution of the failure depth of layered roof is obtained. The mechanical model of pillar bar of the splitting coal body in the potential spalling zone is established, and the deflection deformation expression of the pillar bar is derived. In view of the deformation and failure characteristics of the roof and rib, this paper puts forward the cooperative integrated support technology based on high-strength prestressed cables and deep-shallow hole grouting, which effectively reduce the hidden danger of roof falling and eliminate the formation of ultrahigh roadway from the source.