Xinzhu Hua

Dr. Xinzhu Hua


Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 July 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
XLXiao Liu
Xiao Liu
XHXinzhu Hua
Xinzhu Hua
YLYuntao Liang
Yuntao Liang
CLChen Li
Chen Li
The important technical process to ensure the success of gob-side entry retaining by roof cutting (GERRC) was the advanced pre-splitting blasting to cut off the mechanical connection between the roadway and working face roof. The whole-cycle roof structure evolution and stress characteristics of GERRC were analyzed. The factors affecting the roof deformation of GERRC were analyzed, and the quantitative relationship between the roof deformation of GERRC and the support stiffness was determined. The results showed that the temporary support stiffness was higher, the support position to the side of the roof cutting was closer, and the roof subsidence deformation of GERRC was smaller. It is proposed to use a single support mass with a high stiffness to control the deformation of the roof, but it also made the support mass and roof elastic potential energy aggregate. To fully utilize the matching of the support stiffness and roof subsidence, improve the stability, and control the subsidence deformation of the roof in GERRC, double-row stacking supports were adopted in the inclination of GERRC, which were used to increase the stiffness of the support system.

11 October 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
HLHuaibin Li
Huaibin Li
ZGZhenpeng Guo
Zhenpeng Guo
XHXinzhu Hua
Xinzhu Hua
BDBibo Dai
Bibo Dai
XZXuemin Zeng
Xuemin Zeng
YZYuemao Zhao
Yuemao Zhao
The safe and efficient extraction of ore bodies under buildings contributes to the continued exploitation and utilization of mineral resources. To effectively reduce the mining-induced disturbance caused to surface buildings, the Vertical Crater Retreat (VCR) delayed backfilling method was applied at the Wuji iron mine according to mining theory and engineering experience, and the surface deformation under buildings was investigated through numerical simulation and on-site monitoring. The results show that stress concentration occurs at the top of the ore body and in surrounding rocks between ore veins, and the direction of the principal stress coincides with that of the main bearing capacity of the rock mass. With the increasing distance between the surrounding rock and the ore body, the stress disturbance in the surrounding rock attenuates gradually. The surface subsidence and deformation caused by ore mining exhibits the same northwest trend as the strike of the ore body, and the surface deformation in the X direction is greater than that in the Y direction. The surface deformation of the mining area near the 1# air shaft, Wuji village, steam autoclave workshop of the brick factory, and 1# substation is relatively large, while the surface subsidence, horizontal deformation, inclination, and curvature are all smaller than the critical values allowed for buildings and structures. This research provides a theoretical basis and engineering guidance for the prevention and control of surface deformation during mining under buildings and structures.

7 August 2008 in Journal of Coal Science and Engineering (China)
Verified
Journal Article
Closed access
PDF file
XHXinzhu Hua
Xinzhu Hua
JWJia-Chen Wang
Jia-Chen Wang

3 August 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
XLXiao Liu
Xiao Liu
YLYuntao Liang
Yuntao Liang
XHXinzhu Hua
Xinzhu Hua
XQXinlin Qin
Xinlin Qin
Scientific and reasonable roof-cutting parameters are key to ensuring pressure relief of the retained roadway roof. This manuscript takes the 7135 working face of Qidong Coal Mine as the engineering background and uses theoretical analysis, numerical and on-site measurement methods to study the quantitative relationship and pressure relief effect between different roof-cutting parameters of GERRC. We established a fracture criterion based on the tensile strength of the main roof of the uncut joint along the cutting line. We analyzed the quantitative relationship between different main roof thickness, cutting height, cutting angle, and the main roof tensile stress of the uncut joint. We found that within a small range of cutting angles, as the cutting angle decreases, the tensile stress on the main roof of the uncut joint increases. When the cutting angle is 0, the main roof tensile stress of the uncut joint reaches its maximum. As the cutting height increases, the limitation of the cutting angle on the cutting height becomes smaller. Numerical simulation was conducted to study the distribution patterns of maximum and minimum principal stresses along the direction of the roadway roof during the retention period under different roof-cutting heights and angles. Based on this, the optimal unloading effect of the roadway roof and the minimum concentration of mining stress were obtained at a roof-cutting height of 9 m and a roof-cutting angle of 80°. Through on-site measurement of the stress on the reinforcement anchor cable during the retention period, the deformation of the sinking roadway roof, and the pressure relief control effect of the retained roadway roof, the pressure relief effect and scientific rationality of the design of the cutting height and cutting angle were verified.

20 September 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
XNXianjie Ni
Xianjie Ni
YYYuan Yuan
Yuan Yuan
XHXinzhu Hua
Xinzhu Hua
Ke DingKe Ding
Ke Ding
This study aims to alleviate the serious deformation of surrounding rock (SR) in an extremely soft and fragile fully mechanized caving face roadway (ESFFMCFR, the 8# coal seam, Huaibei mining area) under a conventional support. Laboratory tests of roadway SR were conducted. The results show that in this coal seam, the extremely soft and fragile coal body has a high clay mineral content, so it is of low strength and breaks and softens easily. With reference to the mechanical tests on coal and rock mass around the coal seam and the monitoring results of roadway deformation, the roadway deformation is mainly caused by the development of fractures in the roadway SR, the separation of the support body and SR and the loose supporting structure. Considering the engineering environment and deformation characteristics of SR in the ESFFMCFR (the 8# coal seam, Huaibei mining area), this study proposed a synergistic support system of “lowering, drilling, anchoring, grouting and flatting (LDAGF)” for the ESFFMCFR based on the synergistic mechanism of support and SR under the basic principles of synergetics. Specifically, the synergistic support system of “LDAGF” includes the following measures: floor breaking and side lowering, bolt advance support, anchor cable support, advance water injection and grouting and flat-roof U-shaped steel shed support. Furthermore, this synergistic support system was applied on the ESFFMCFR in the 8# coal seam of Xinhu and Guobei coal mines, Huaibei mining area. The on-site application results reveal that when the synergistic support system is adopted, the maximum subsidence values in the above roadway roofs are 117 mm and 121 mm and the maximum displacement values of the two sides are 66 mm and 74 mm, respectively, which proves an excellent support effect. The synergistic support system, which can effectively control the serious deformation of the SR in ESFFMCFRs and ensure long-term stability and safety of the roadways, is suitable for the support of ESFFMCFRs and is of great guiding significance for roadways of the same type.

4 April 2023 in Shock and Vibration
Verified
Journal Article
Open access
PDF file
YZYe Zhu
Ye Zhu
XHXinzhu Hua
Xinzhu Hua
WLWeiyu Li
Weiyu Li
Driven by the high original rock stress and engineering disturbance, the ultrahigh roadways of about 7∼8 m appear in the deep coal mine. Based on the field measured data, the stability in different zones of roof and rib is divided. From shallow to deep, the roof forms potential leakage and falling zone, metastable zone, and stable zone, and the coal rib forms potential spalling zone, crack developed zone, and transition zone. Based on the theory of transverse isotropy, the mechanical analysis model of layered roof is established, the real stress state at any point of layered roof is deduced, the roof failure criterion is constructed, and the theoretical solution of the failure depth of layered roof is obtained. The mechanical model of pillar bar of the splitting coal body in the potential spalling zone is established, and the deflection deformation expression of the pillar bar is derived. In view of the deformation and failure characteristics of the roof and rib, this paper puts forward the cooperative integrated support technology based on high-strength prestressed cables and deep-shallow hole grouting, which effectively reduce the hidden danger of roof falling and eliminate the formation of ultrahigh roadway from the source.