The aim of the following paper was to present the geomatic process of transforming low-level aerial imagery obtained with unmanned aerial vehicles (UAV) into a digital terrain model (DTM) and implementing the model into a virtual reality system (VR). The object of the study was a natural aggretage heap of an irregular shape and denivelations up to 11 m. Based on the obtained photos, three point clouds (varying in the level of detail) were generated for the 20,000-m²-area. For further analyses, the researchers selected the point cloud with the best ratio of accuracy to output file size. This choice was made based on seven control points of the heap surveyed in the field and the corresponding points in the generated 3D model. The obtained several-centimetre differences between the control points in the field and the ones from the model might testify to the usefulness of the described algorithm for creating large-scale DTMs for engineering purposes. Finally, the chosen model was implemented into the VR system, which enables the most lifelike exploration of 3D terrain plasticity in real time, thanks to the first person view mode (FPV). In this mode, the user observes an object with the aid of a Head- mounted display (HMD), experiencing the geovisualisation from the inside, and virtually analysing the terrain as a direct animator of the observations.

The aim of the research was to create 3D cartographic visualization based on various sources and data types of an existing historical topographic object. The authors will present the stages of the research for the historical windmill located in Poland. The most recent surveying methods, such as GNSS method, low-level aerial photogrammetry and advanced IT tools, including computer software, will be applied for this purpose. The sequence of research procedures adopted by the authors of this article allowed for the creation of a 3D model of the tested windmill and its implementation into the Internet environment. This allowed to increase the cartographic range of spatial information. In addition, the research results allow for the extension of research in the field of history and can be the basis for their implementation.

The aim of the following study was to present three alternative methods of visualization on animated maps illustrating the movement of people gathered at an open-air event recorded on photographs taken by a drone. The effectiveness of an orthorectified low-level aerial image (a so-called orthophoto), a dot distribution map, and a buffer map was tested in an experiment featuring experts, and key significance was attached to the juxtaposition of objective responses with subjective opinions. The results of the study enabled its authors to draw conclusions regarding the importance of visualizing topographic references (stable objects) and people (mobile objects) and the usefulness of the particular elements of animated maps for their analysis and interpretation.

Unmanned aerial vehicles are increasingly being used in close range photogrammetry. Real-time observation of the Earth’s surface and the photogrammetric images obtained are used as material for surveying and environmental inventory. The following study was conducted on a small area (approximately 1 ha). In such cases, the classical method of topographic mapping is not accurate enough. The geodetic method of topographic surveying, on the other hand, is an overly precise measurement technique for the purpose of inventorying the natural environment components. The author of the following study has proposed using the unmanned aerial vehicle technology and tying in the obtained images to the control point network established with the aid of GNSS technology. Georeferencing the acquired images and using them to create a photogrammetric model of the studied area enabled the researcher to perform calculations, which yielded a total root mean square error below 9 cm. The performed comparison of the real lengths of the vectors connecting the control points and their lengths calculated on the basis of the photogrammetric model made it possible to fully confirm the RMSE calculated and prove the usefulness of the UAV technology in observing terrain components for the purpose of environmental inventory. Such environmental components include, among others, elements of road infrastructure, green areas, but also changes in the location of moving pedestrians and vehicles, as well as other changes in the natural environment that are not registered on classical base maps or topographic maps.

Traditionally, chorochromatic maps with a qualitative measurement level are used for land use presentations. Along with the use of UAV (Unmanned Aerial Vehicles), it became possible to register dynamic phenomena in a small space. We analyze the application of qualitative and quantitative mapping methods to visualize land use in a dynamic context thanks to cyclically obtained UAV imaging. The aim of the research is to produce thematic maps showing the actual land use of the small area urbanized by pedestrians. The research was based on low-level aerial imagery that recorded the movement of pedestrians in the research area. Additionally, based on the observation of pedestrian movement, researchers pointed out the areas of land that pedestrians used incorrectly. For this purpose, the author will present his own concept of the point-to-polygon transformation of pedestrians’ representation. The research was an opportunity to demonstrate suitable mapping techniques to effectively convey the information on land use by pedestrians. The results allowed the authors of this article to draw conclusions on the choice of suitable mapping techniques during the process of thematic land use map design and to specify further areas for research.

Technological advancement of the last decades allowed one to develop the process of documentation and popularize the cultural heritage in the form of spatial objects and structures by means of reality modelling. The main goal of the article was to develop a methodology based on the compilation of activities in the field of acquisition (UAV), processing (Metashape and SkechUp), and publication (YouTube) of the data for the purpose of documentation and promotion of topographic cultural heritage objects recorded on nineteenth century maps (pre-industrial landscape). The research was carried out on a windmill located in Kamionka (Poland). It is located in the region of Wielkopolska (Witkowo borough), the cultural landscape of which, despite the progressive industrialization in the nineteenth century, has been shaped mainly by the agricultural land use. The most important results obtained at subsequent stages of the work were finally presented in the form of a short film. This type of presentation based on the use of multimedia is a comprehensive form of sharing research results. YouTube, as the leading medium for publishing audiovisual content, is one of the best places to share research results related to the promotion of cultural heritage.