Vanesa Mateo Pérez

Mrs. Vanesa Mateo Pérez

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 June 2020 in Remote Sensing
Verified
Journal Article
Open access
PDF file
VPVanesa Mateo Pérez
Vanesa Mateo Pérez
Marina Corral BobadillaMarina Corral Bobadilla
Marina Corral Bobadilla
Francisco Ortega-FernandezFrancisco Ortega-Fernandez
Francisco Ortega-Fernandez
EGEliseo Pablo Vergara González
Eliseo Pablo Vergara González
Knowledge of the free draft of ports is essential for the adequate management of ports. To maintain these drafts, it is necessary to carry out dredging periodically, and to conduct bathymetries using traditional techniques, such as echo sounding. However, an echo sounder is very expensive and its accuracy is subject to weather conditions. Thus, the use of recent advancements in remote sensing techniques provide a better solution for mapping and estimating the evolution of the seabed in these areas. This paper presents a cost-effective and practical method for estimating satellite-derived bathymetry for highly polluted and turbid waters at two different ports in the cities of Luarca and Candás in the Principality of Asturias (Spain). The method involves the use of the support vector machine (SVM) technique and open Sentinel-2 satellite imagery, which the European Space Agency has supplied. Models were compared to the bathymetries that were obtained from the in situ data collected by a single beam echo sounder that the Port Service of the Principality of Asturias provided. The most accurate values of the training and testing dataset in Candás, were R2 = 0.911 and RMSE = 0.3694 m, and R2 = 0.8553 and RMSE = 0.4370 m, respectively. The accuracies of the training and testing dataset values in Luarca were R2 = 0.976 and RMSE = 0.4409 m, and R2 = 0.9731 and RMSE = 0.4640 m, respectively. The regression analysis results of the training and testing dataset were consistent. The approaches that have been developed in this work may be included in the monitoring of future dredging activities in ports, especially where the water is polluted, muddy and highly turbid.

27 April 2021 in Energies
Verified
Journal Article
Open access
PDF file
VPVanesa Mateo Pérez
Vanesa Mateo Pérez
Marina Corral BobadillaMarina Corral Bobadilla
Marina Corral Bobadilla
Francisco Ortega-FernandezFrancisco Ortega-Fernandez
Francisco Ortega-Fernandez
Vicente Rodriguez MontequínVicente Rodriguez Montequín
Vicente Rodriguez Montequín
One of the fundamental maintenance tasks of ports is the periodic dredging of them. This is necessary to guarantee a minimum draft that will enable ships to access ports safely. The determination of bathymetries is the instrument that determines the need for dredging and permits an analysis of the behavior of the port bottom over time, in order to achieve adequate water depth. Satellite data processing to predict environmental parameters is used increasingly. Based on satellite data and using different machine learning algorithm techniques, this study has sought to estimate the seabed in ports, taking into account the fact that the port areas are strongly anthropized areas. The algorithms that were used were Support Vector Machine (SVM), Random Forest (RF) and the Multi-Adaptive Regression Splines (MARS). The study was carried out in the ports of Candás and Luarca in the Principality of Asturias. In order to validate the results obtained, data was acquired in situ by using a single beam provided. The results show that this type of methodology can be used to estimate coastal bathymetry. However, when deciding which system was best, priority was given to simplicity and robustness. The results of the SVM and RF algorithms outperform those of the MARS. RF performs better in Candás with a mean absolute error (MAE) of 0.27 cm, whereas SVM performs better in Luarca with a mean absolute error of 0.37 cm. It is suggested that this approach is suitable as a simpler and more cost-effective rough resolution alternative, for estimating the depth of turbid water in ports, than single-beam sonar, which is labor-intensive and polluting.

29 April 2021 in Water
Verified
Journal Article
Open access
PDF file
VPVanesa Mateo Pérez
Vanesa Mateo Pérez
JFJosé Manuel Mesa Fernández
José Manuel Mesa Fernández
Joaquin Villanueva BalseraJoaquin Villanueva Balsera
Joaquin Villanueva Balsera
CÁCristina Alonso Álvarez
Cristina Alonso Álvarez
The content of fats, oils, and greases (FOG) in wastewater, as a result of food preparation, both in homes and in different commercial and industrial activities, is a growing problem. In addition to the blockages generated in the sanitary networks, it also represents a difficulty for the performance of wastewater treatment plants (WWTP), increasing energy and maintenance costs and worsening the performance of downstream treatment processes. The pretreatment stage of these facilities is responsible for removing most of the FOG to avoid these problems. However, so far, optimization has been limited to the correct design and initial installation dimensioning. Proper management of this initial stage is left to the experience of the operators to adjust the process when changes occur in the characteristics of the wastewater inlet. The main difficulty is the large number of factors influencing these changes. In this work, a prediction model of the FOG content in the inlet water is presented. The model is capable of correctly predicting 98.45% of the cases in training and 72.73% in testing, with a relative error of 10%. It was developed using random forest (RF) and the good results obtained (R2 = 0.9348 and RMSE = 0.089 in test) will make it possible to improve operations in this initial stage. The good features of this machine learning algorithm had not been used, so far, in the modeling of pretreatment parameters. This novel approach will result in a global improvement in the performance of this type of facility allowing early adoption of adjustments to the pretreatment process to remove the maximum amount of FOG.

8 February 2021 in Water
Verified
Journal Article
Open access
PDF file
VPVanesa Mateo Pérez
Vanesa Mateo Pérez
JFJosé Manuel Mesa Fernández
José Manuel Mesa Fernández
Francisco Ortega-FernandezFrancisco Ortega-Fernandez
Francisco Ortega-Fernandez
Joaquin Villanueva BalseraJoaquin Villanueva Balsera
Joaquin Villanueva Balsera
The preliminary treatment of wastewater at wastewater treatment plants (WWTPs) is of great importance for the performance and durability of these plants. One fraction that is removed at this initial stage is commonly called gross solids and can cause various operational, downstream performance, or maintenance problems. To avoid this, data from more than two operation years of the Villapérez Wastewater Treatment Plant, located in the northeast of the city of Oviedo (Asturias, Spain), were collected and used to develop a model that predicts the gross solids content that reaches the plant. The support vector machine (SVM) method was used for modelling. The achieved model precision (Radj2 = 0.7 and MSE = 0.43) allows early detection of trend changes in the arrival of gross solids and will improve plant operations by avoiding blockages and overflows. The results obtained indicate that it is possible to predict trend changes in gross solids content as a function of the selected input variables. This will prevent the plant from suffering possible operational problems or discharges of untreated wastewater as actions could be taken, such as starting up more pretreatment lines or emptying the containers.

Verified
Journal Article
Open access
PDF file
VPVanesa Mateo Pérez
Vanesa Mateo Pérez
Marina Corral BobadillaMarina Corral Bobadilla
Marina Corral Bobadilla
Francisco Ortega-FernandezFrancisco Ortega-Fernandez
Francisco Ortega-Fernandez
Vicente Rodriguez MontequínVicente Rodriguez Montequín
Vicente Rodriguez Montequín
One of the fundamental tasks in the maintenance of port operations is periodic dredging. These dredging operations facilitate the elimination of sediments that the coastal dynamics introduce. Dredging operations are increasingly restrictive and costly due to environmental requirements. Understanding the condition of the seabed before and after dredging is essential. In addition, determining how the seabed has behaved in recent years is important to consider when planning future dredging operations. In order to analyze the behavior of sediment transport and the changes to the seabed due to sedimentation, studies of littoral dynamics are conducted to model the deposition of sediments. Another methodology that could be used to analyze the real behavior of sediments would be to study and compare port bathymetries collected periodically. The problem with this methodology is that it requires numerous bathymetric surveys to produce a sufficiently significant analysis. This study provides an effective solution for obtaining a dense time series of bathymetry mapping using satellite data, and enables the past behavior of the seabed to be examined. The methodology proposed in this work uses Sentinel-2A (10 m resolution) satellite images to obtain historical bathymetric series by the development of a random forest algorithm. From these historical bathymetric series, it is possible to determine how the seabed has behaved and how the entry of sediments into the study area occurs. This methodology is applied in the Port of Luarca (Principality of Asturias), obtaining satellite images and extracting successive bathymetry mapping utilizing the random forest algorithm. This work reveals how once the dock was dredged, the sediments were redeposited and the seabed recovered its level prior to dredging in less than 2 months.

11 May 2020 in Water
Verified
Journal Article
Open access
PDF file
VPVanesa Mateo Pérez
Vanesa Mateo Pérez
JFJosé Manuel Mesa Fernández
José Manuel Mesa Fernández
Francisco Ortega-FernandezFrancisco Ortega-Fernandez
Francisco Ortega-Fernandez
HMHenar Morán-Palacios
Henar Morán-Palacios
The pre-treatment stage of wastewater treatment plants (WWTP), where most of the larger waste, including sand and fat, is removed, is of great importance for the performance and durability of these plants. This work develops a model that predicts the sand content that reaches the plant. For this purpose, data were collected from one operation year of the Villapérez Wastewater Treatment Plant located in the northeast of the city of Oviedo (Asturias, Spain) and the MARS (Multivariate Adaptive Regression Splines) method was used for modelling. The accuracy of the MARS model developed using the determination coefficient is R2 = 0.74 for training data and R2 = 0.70 in validation data. These results indicate that it is possible to predict trend changes in sand production as a function of input variables changes such as flow rate, pH, ammonia, etc. This will prevent the plant from possible operational problems, as actions could be taken, such as starting up more pre-treatment lines or emptying the containers, so that the arrival of the sand can be assumed without any problem. In this way, the possibility of letting sand contents over the established limits pass that could affect the following processes of the treatment plant is avoided.