The study presents comparison of near-infrared light propagation and near-infrared backscattered radiation power, as simulated with numerical modeling and measured live in a patient in clinical conditions with the use of the near-infrared transillumination∕backscattering sounding (NIR-T∕BSS) technique. A unique chance for such precise comparative analysis was available to us in a clinical case of a female patient with scalp removed from one half of the head due to injury. The analysis performed indicates that the difference between the intensity of the signals in numerical modeling and live measurements is less than . Analysis of the theoretical model also provides hints on the positioning of the two detectors relative to the source of radiation. Correctness of these predicted values is confirmed in practical application, when changes of signals received by the detectors are recorded, along with changes of the width of the subarachnoid space. What is more, the power distribution of the spectrum of near-infrared backscattered radiation returning to the detectors is confirmed in the real recording in the patient. An abridged description of the new method of NIR-T∕BSS is presented.
A modified Monte Carlo method was used for numerical modeling of the propagation of near-infrared radiation (NIR) within the anatomical layers of the human head. The distribution of NIR transmission between particular anatomical layers in the measurement region (frontal tubers) of the head was obtained. The study demonstrates the effect of the cardiac pump function-dependent changes in the width of the subarachnoid space (SAS) on the intensity of the backscattered radiation. It was proved that the influence of this factor increases with increasing distance between the observation point and the location of the NIR source placed on the surface of the head. Moreover, with sufficiently small NIR detector-source distance, the contribution of the optic radiation propagated within the SAS to the total signal received is negligibly low, which gives a basis for estimation of the modulatory influence of blood circulation within the superficial skin layer on the total intensity of the backscattered radiation. The dimensions of anatomical layers used in the study are real values measured in a female patient, in whom—due to unique circumstances—it was possible to make measurements followed by recordings in clinical conditions, a situation essential for verification of the results of numerical modeling.
Non-Destructive Inspection of Anti-Corrosion Protective Coatings Using Optical Coherent Tomography: Optical Coherence Tomography (OCT) is one of the most rapidly advancing techniques. This method is capable of non-contact and non-destructive investigation of the inner structure of a broad range of materials. Compared with other methods which belong to the NDE/NDT group (Non-Destructive Evaluation/Non-Destructive Testing methods), OCT is capable of a broad range of scattering material structure visualization. Such a non-invasive and versatile method is very demanded by the industry. The authors applied the OCT method to examine the corrosion process in metal samples coated by polymer films. The main aim of the research was the evaluation of the anti-corrosion protective coatings using the OCT method. The tested samples were exposed to a harsh environment. The OCT measurements have been taken at different stages of the samples degradation. The research and tests results have been presented, as well as a brief discussion has been carried out.
In this paper, optical measurement techniques, which enable non-invasive measurement, are superimposed to glucose sensing in scattering media. Used measurement techniques are Optical Coherence Tomography (OCT), Photoacoustic spectroscopy (PAS) and laser pulse Time-of-Flight (TOF) measurement using a streak camera. In parallel with measurements, a Monte-Carlo (MC) simulation models have been developed. Experimental in vitro measurements were performed using Intralipid fat emulsion as a tissue simulating phantom for OCT and TOF measurements. In PAS measurements, a pork meat was used as a subject but also preliminary in vivo measurements were done. OCT measurement results show that the slope of the OCT signal's envelope changes as a function of glucose content in the scattering media. TOF measurements show that the laser pulse full width of half maximum (FWHM) changes a little as function of glucose content. An agreement with MC-simulations and measurements with Intralipid was also found. Measurement results of PAS technique show that changes in glucose content in the pork meat tissue can be measured. In vivo measurements with a human volunteer show that other factors such as physiological change, blood circulation and body temperature drift may interfere the PA response of glucose.