Metals are extensively used in a variety of applications in the medical field for internal support and biological tissue replacements, such as joint replacements, dental roots, orthopedic fixation, and stents. The metals and alloys that are primarily used in biomedical applications are stainless steels, Co alloys, and Ti alloys. The service period of a metallic biomaterial is determined by its abrasion and wear resistance. A reduction in the wear resistance of the implant results in the release of incompatible metal ions into the body that loosen the implant. In addition, several reactions may occur because of the deposition of wear debris in tissue. Therefore, developing biomaterials with high wear resistance is critical to ensuring a long life for the biomaterial. The aim of this work is to review the current state of knowledge of the wear of metallic biomaterials and how wear is affected by the material properties and conditions in terms of the type of alloys developed and fabrication processes. We also present a brief evaluation of various experimental test techniques and wear characterization techniques that are used to determine the tribological performance of metallic biomaterials.

Epoxy composite coating systems generally find their usage in applications such as, fluid handling systems to protect components from corrosive media. However, their use in demanding tribological applications such as, in sliding components of machines, are known to be limited. This is often attributed to their low load bearing capacity combined with poor thermal stability under severe p-v regimes. Researchers have tried to enhance the tribological properties of the epoxy coatings using a combination of several types of micro/nano sized fillers to produce composite or hybrid composite coatings. Hence, this review paper aims to focus on the recent advances made in developing the epoxy coating systems. Special attention would be paid to the types and properties of nano-fillers that have been commonly used to develop these coatings, different dispersion techniques adopted and the effects that each of these fillers (and their combinations) have on the tribological properties of these coatings.

In the recent past, polymer coatings have gained the attention of many researchers due to their low cost, their ability to be coated easily on different substrates, low friction and good anti-corrosion properties. Various polymers such as polytetrafluroethylene (PTFE), polyether ether ketone (PEEK), polymethylmethacrylate (PMMA), polyurethane (PU), polyamide (PA), epoxy and ultra-high molecular weight polytheylene (UHMWPE) have been used to develop these coatings to modify the surfaces of different components to protect them from wear and corrosion. However, among all these polymers, UHMWPE stands out as a tribologist’s polymer due to its low friction and high wear resistance. These coatings have found their way into applications ranging from microelectro mechanical systems (MEMS) to demanding tribological applications such as bearings and biomedical applications. Despite its excellent tribological properties, UHMWPE suffers from limitations such as low load bearing capacity and low thermal stability. To overcome these challenges researchers have developed various routes such as developing UHMWPE composite and hybrid composite coatings with several types of nano/micro fillers, developing composite films system and developing dual film systems. The present paper is an effort to summarize these various routes adopted by different researchers to improve the tribological performance of UHMWPE coatings.