In this paper, we design a monolithic integrated micro-opto-electromechanical system(MOEMS) accelerometer based on the Michelson interferometer structure. The accelerometer realizes the on-chip integration of the mode spot converter, the sensing optical path, the phase modulator and the photonic crystal reflector, and it senses the external acceleration through a “three-beam” structure which is composed of a central support beam and two tiny beams. The push-pull structure eliminates the coupling crosstalk caused by paraxial acceleration. Accurate results are demonstrated as follows: an accelerometer mechanical sensitivity of 3.638 nm/g, with a resonance frequency of 1742.2 Hz and a linear measurement range of ± 500 g, corresponding to a foot print of the core part with 960 μm×600 μm. With its high precision, large measurement range, and small size, the proposed accelerometer may pave the way for the applications in civil, industrial and military fields.
The resonant fiber optic gyro (RFOG) based on reciprocal modulation-demodulation technique is introduced and the influence of high modulation frequency on resonance and demodulation output is analyzed. The expression of backscattering output in resonant cavity is deduced and the experimental device is built to measure the backscattering coefficient. The demodulation model considering backscattering noise is established under reciprocal sinusoidal modulation, and the optimal modulation parameters are obtained by simulation. Finally, the RFOG system is set up. The results show that the detection sensitivity is improved by 19% with the optimal modulation parameters and the system bias stability improves from 0.067/s to 0.023/s.
In this paper, we constructed a ring resonator using a polarization-maintaining hollow-core photonic bandgap fiber with a spatial coupling scheme, which includes a beam splitter and two pairs of even aspheric lenses. We developed a pioneering algorithm that can identify the polarization axis of the polarization-maintaining hollow-core fiber based on its cross-sectional image, enabling us to achieve an axis identification accuracy of 0.2°, and achieved a resonant curve with a finesse of 7. Without introducing additional polarization control components, we achieved the control of the polarization state inside the resonant ring, suppressing the secondary eigenstate of polarization successfully. This provides a new approach to polarization-maintaining hollow-core fiber coupling in a ring resonator.
The pyroelectric effect in ${\mathbf {LiNbO}}_{\mathbf {3}}$ electro-optic (E-O) modulators leads to bias instability in temperature variation environments. In this study, the pyroelectric model of X-cut ${\mathbf {LiNbO}}_{\mathbf {3}}$ modulator is established for the first time. Simulations of pyroelectric responses under a fixed rate of 2 K/min are conducted, testing two suppression methods: grounding the $\boldsymbol {\pm Z}$ polarization planes and adding surface grounded electrodes, with the latter showing a decrease in the pyroelectric voltage drop by 29.75%. The temperature experiment on the fabricated X-cut ${\mathbf {LiNbO}}_{\mathbf {3}}$ modulator with foldback form reveals that short-circuiting the electrodes could eliminate the pyroelectric pulse discharge phenomenon. Further coating electrically conductive adhesive(ECA) to act as grounded electrodes could suppress pyroelectric secondary oscillations, which shows a reduction of 44.96%. The proposed pyroelectric suppression methods provide a potential improvement strategy for enhancing bias stability in phase-sensitive devices based on ${\mathbf {LiNbO}}_{\mathbf {3}}$ materials.