The operating temperature is an essential parameter determining the performance of a photovoltaic (PV) module. Moreover, the estimation of the temperature in the absence of measurements is very complex, especially for outdoor conditions. Fortunately, several models with and without wind speed have been proposed to predict the outdoor operating temperature of a PV module. However, a problem for these models is that their accuracy decreases when the sampling interval is smaller due to the thermal inertia of the PV modules. In this paper, two models, one with wind speed and the other without wind speed, are proposed to improve the precision of estimating the operating temperature of outdoor PV modules. The innovative aspect of this study is two novel thermal models that consider the variation of solar irradiation over time and the thermal inertia of the PV module. The calculation is applied to different types of PV modules, including crystalline silicon, thin film as well as tandem technology at different locations. The models are compared to models that are described in the literature. The results obtained in different time steps show that our proposed models achieve better performance and can be applied to different PV technologies.

Predicting actual energy harvesting of a photovoltaic (PV) installation as per site-specific conditions is essential, from the customer’s point of view, to choose suitable PV technologies as well as orientations, since most PVs usually have been designed and evaluated under standard illumination. Hence, the tendency lives in the PV community to evaluate the performance on the energy yield and not purely on the efficiency. The major drawback is that weather conditions play an important role, and recording solar spectra in different orientations is an expensive and time-consuming business. We, therefore, present a model to calculate the daily, monthly and annual energy yield of Si-based PV installations included in commercial panels as well as tandem solar cells. This methodology will be used to evaluate the benefit of potential new technologies for domestic and building integrated applications. The first advantage of such a numerical model is that the orientation of solar panels and their properties can be easily varied without extra experiments. The second advantage is that this method can be transferred to other locations since it is based on a minimum of input parameters. In this paper, the energy yield of PV installations for different regions in Belgium and Vietnam will be calculated.