Millimeter wave (mm-Wave) technology is likely the key enabler of 5G and early 6G wireless systems. The high throughput, high capacity, and low latency that can be achieved, when mm-Waves are utilized, makes them the most promising backhaul as well as fronthaul solutions for the communication between small cells and base stations or between base stations and the gateway. Depending on the channel properties different communication systems (e.g., beamforming and MIMO) can accordingly offer the best solution. In this work, our goal is to design millimeter wave beamformers for switched beam phased arrays as hybrid beamforming stages. Specifically, three different analog beamforming techniques for the frequency range of 27–33 GHz are presented. First, a novel compact multilayer Blass matrix is proposed. Second, a modified dummy-ports free, highly efficient Rotman lens is introduced. Finally, a three-layer true-time-delay tree topology inspired by microwave photonics is presented.

A novel Green’s function-free characteristic modes formulation is introduced in this work. The desired impedance or admittance matrix is obtained utilizing and appropriately modifying the versatile finite element method. For this purpose, the generalized eigenvalue problem of the electric or magnetic field vector wave equation is formulated. In the case of the electric field wave equation, using the Schur complement, the system is reformulated and expressed only in terms of the tangential electric field over the radiating apertures, retaining the equivalent magnetic currents. Similarly, in the case of the magnetic field wave equation, the electric current density on radiating metallic surfaces is isolated using the Schur complement. In both cases, the obtained matrix is split into its real and imaginary part to yield the characteristic modes eigenvalue problem. Key advantage of the proposed formulation is that it does not require the evaluation of Green’s function, thereby the study of any arbitrarily shaped, multilayered geometry loaded with anisotropic and inhomogeneous materials is feasible. To prove the validity of the proposed methodology various classical structures, with both homogeneous, and inhomogeneous and anisotropic materials, published in the bibliography are studied. Both the eigenvalues and eigenvectors compared with the published results show good agreement.

The estimation of the proper amplitude and phase excitation of phased array applicator used for hyperthermia treatment constitutes the scope of this work. The aim of this array is to focus the electromagnetic power only on the malignant biological tissues and not to create other unwanted secondary “hot spots”. The proposed method is based on the reciprocity theorem in order to build the simulation model for the exact numerical calculation of the excitation values. Explicitly, a simplistic body model or Human arm is constructed including the antennas and the water bolus utilized for cooling. An antenna is placed at the tumor center acting as source and an electromagnetic simulation is performed to estimate the path delay (phase difference) to each array element. These delays or phase differences are used to define the array excitation currents, ensuring the focus of the electromagnetic power on the tumors.

In this work, we present a rigorous full-wave eigenanalysis for the study of nanoantennas operating at both terahertz (THz) (0.1–10 THz), and infrared/optical (10–750 THz) frequency spectrums. The key idea behind this effort is to reveal the physical characteristics of nanoantennas such that we can transfer and apply the state-of-the-art antenna design methodologies from microwaves to terahertz and optics. Extensive attention is given to penetration depth in metals to reveal whether the surface currents are sufficient for the correct characterization of nanoantennas, or the involvement of volume currents is needed. As we show with our analysis, the penetration depth constantly reduces until the region of 200 THz; beyond this point, it shoots up, requiring volume currents for the exact characterization of the corresponding radiating structures. The cases of a terahertz rectangular patch antenna and a plasmonic nanoantenna are modeled, showing in each case the need of surface and volume currents, respectively, for the antenna’s efficient characterization.

This work aims at the establishment of a rigorous full-wave eigenmode analysis technique based on a finite element scheme for the study of terahertz (THz) or photonic/optical unbounded structures. This numerical tool follows the last decades' trend to migrate the technological knowledge from microwave to THz and photonic regimes. The performed eigenanalysis offers an insightful view of the studied structures, revealing their characteristics. For the truncation of the infinite solution domain, the first kind absorbing boundary conditions are employed, while the involved spurious modes are eliminated with the incorporation of a tree-cotree splitting formulation. The study focuses on tunable microring resonators supporting leaky radiating wave propagation and bounded-resonating whispering gallery modes. Tunability is achieved by integrating an electro-optical layer and in turn through the enforcement of an external applied DC electric field. An innovative approach constitutes the numerical determination of the altered dielectric permittivity as a piecewise constant distribution rather than a constant mean value.