The Tell el-Retaba archaeological site is located at Wadi Tumilat, a shallow valley running from the Nile Delta to the Bitter Lakes. In ancient times, a route connecting Egypt with Syria-Palestine ran across the site. In the 13th century BC, during the rule of Ramesses II, a fortress surrounded by “Wall 1” was erected and in times of Ramesses III in the 12th century BC, a larger fortress surrounded by “Wall 2” and “Wall 3” was constructed. Using the finite element method (FEM) and ZSoil 2D&3D software, the wall heights were modelled and their soil-structure interaction was analysed. Strength of the wall depended on size and strength of bricks and mortar, brickwork, wall shape and foundation. Ancient builders using mud bricks must have known from practical experience the essentials of a wall construction, in which the height to width ratio was at 1.75 to 1.85. Moreover, they must have related the engineering properties of the material with the height of the construction and its purpose. The width to height ratio must have been used and related by ancient Egyptians to the ground resistance. Modelling has shown that, at wall width of 5 m, the foundation would have lost its stability at wall height of 13–14 m and bricks from the lower part of the wall would be destroyed. According to the undertaken assumptions, in order to retain stability, the wall height must have been limited to about 8–9 m.

Faience objects produced from the fourth millennium BC in ancient Egypt are considered as the first high-tech ceramics in human history. Despite extensive studies on manufacturing technology, many aspects of this complex technology remain a mystery and there is no methodology in place to unravel the techniques of Egyptian faience object production. Detailed studies presented herein fill the gaps, verifying standing opinions and allowing certain aspects of faience manufacturing technology to be reconstructed. The object of this innovative investigation is a hemispherical faience bowl discovered by archaeologists excavating a Ptolemaic workshop district at the site of Tell Atrib in the southern Nile Delta. The multiproxy analysis included the application of specialised software and preparation techniques coupled with complementary methods of light and digital microscopy, SEM with EDS, XRD, STA with EGA, as well as image analysis. Sources of raw and accessory materials (mineral and organic binders, fluxes, colourants) used for preparing the silica paste and glaze slurry were determined. The results helped to reconstruct how the raw material was prepared and how faience vessels were made. The bowl was moulded by compression using a two-part mould. The moulded and dried bowl was then covered by glaze slurry using the application method. A synthetic colourant, Egyptian Blue, was probably used to colour the glaze. The item was fired once at a temperature of 1050–1150 °C. Oxidised conditions were maintained in the kiln during the firing process and firing at the maximal temperature was relatively short. Application of the multiproxy approach has shed light on the technological aspects of faience bowl manufacturing. The obtained results have confirmed the usefulness of the comprehensive methodology that was applied for the reconstruction of particular manufacturing stages of faience objects.

This article presents the results of petrophysical analyses of limestones and sandstones used for the construction of the wall structures of a Roman rural settlement located in Podšilo Bay on Rab Island (Croatia). An on-site analysis of the walls indicated the use of different lithotypes, which is an uncommon case in the area. So far, no petrophysical properties of the applied materials have been tested, and their provenance has not been specified. The aim of this research was to determine their usability as construction materials in an attempt to determine the possible reasons behind the usage of multiple lithotypes and their suitability as building materials. The following procedure was used to address these issues: (1) determination of the petrographic characteristics of the rocks, (2) performance of tests to characterise the mechanical properties in a complex stress state of uniaxial tension followed by uniaxial and triaxial compression, and, finally, (3) determination of the internal structure of the rocks using methods based on X-ray imaging. Multi-proxy characteristics of the materials including numerous observations and methods were performed: optical microscopy used to characterise rock petrography and mineralogy, scanning electron microscopy (SEM) coupled with EDS, as well as grinding tests; furthermore, mechanical properties were determined on cylindrical samples in accordance with European standards. X-ray microtomography using the XμCT method enabled microscopic observations and determination of the orientation of discontinuities and the rock structure. The performed analyses allowed us to distinguish three lithological types of sandstone and two types of limestone among the examined stone blocks. Stone blocks of fine- and medium-grained sandstone with carbonate binders, as well as sparitic limestone and mudstone with calcite veins, were used to build the studied structures. The analysed blocks showed traces of partial edge processing. Despite the defects in the material structure identified using XμCT, all the types of rock were characterised by high or very high strength. High values of longitudinal wave velocity confirmed the good quality of the material. These results contribute to a better understanding of the construction process and the related technological choices, and they provide the first dataset which can be used for the reconstruction of the building’s original appearance in the future.

The provenance of siliceous grain material, the basic source of manufacturing faience items, is still a matter of discussion. The study methods applied so far have not brought satisfactory outcomes, and the results are ambiguous and problematic. Archaeological evidence has also not supplied adequate proof for establishing the sites where the source material was obtained and the methods of its preparation. Therefore, we propose an interdisciplinary approach to solve these research problems. We explore selected material of 7 faience bowls precisely dated on the c. 100 years of the Ptolemaic Period in Egypt. The body and glaze of the faience bowls was qualitatively and quantitatively tested with regard to chemical and mineral composition, and selected material parameters. Based on structural-textural analysis, as well as chemical and mineral composition, the source area of the studied raw material and its potential excavation site was determined in the Eastern Desert. The obtained results were compared with locations of mines exploiting gold-bearing quartz veins, functioning in the Ptolemaic Period. Material parameters obtained from image analysis have been applied to reconstruct the processes of crushing and grinding of the quartz material and its further treatment for faience manufacturing. Quartz treatment was analysed with regard to tools and handling processes applied in Ptolemaic mines. We assume that such an approach has given accurate results in determining the provenance of siliceous material used in the Ptolemaic workshops of Athribis. Therefore, in material studies of artefacts produced in the antiquity, it is indispensable to use an interdisciplinary and complex approach, beginning from field studies and ending with detailed laboratory analyses.

In one of the shallow bays of Lopar, in the northern part of the Island of Rab, dominates a rocky islet known as Lukovac. Despite its small size, the islet reveals unique late antique architectural remains. Based on the fieldwork conducted, it can be concluded that almost the entire area of the islet was covered by masonry buildings. The islet was additionally surrounded by a wall reinforced with buttresses. The church was the centrepiece of this late antique settlement. It was a simple building, consisting of only one nave and a semi-circular apse articulated by four lesene. Considering the data collected so far, it is likely that in the late antiquity Lukovac Islet fulfilled the function of a fortified settlement, possibly a refugium for local population, while its role as a logistical centre for the Byzantine military presence in the region cannot be fully ruled out. The presence of a large church may suggest that the islet once functioned not only as a local central religious site, but also as a local “centre of power”.