The detection and classification of heavy metals is a growing need to guarantee the quality of process water in different industries. However, the official methodologies to evaluate the presence of these contaminants require samples pre-processing, making them time-consuming and expensive; these elements do not allow online monitoring. For this reason, new technologies are required for online monitoring and evaluation. In this work, a new methodology is presented for the detection and classification of different heavy metal ions such as: As, Pb and Cd. Commercial graphite sensors modified with 2D molybdenite were used applying an electroanalytical technique of square wave voltammetry. Subsequently, signal processing based on pattern recognition and machine learning methods was carried out. This classification methodology includes the following steps: data display and arrangement, dimensionality reduction through the t-distributed stochastic neighbor embedding (t-SNE) method, which serves as feature extraction, and the support vector machines (SVM) method as a classifier. The validation is carried out with a data set of 118 aqueous samples. Leave one out cross-validation (LOOCV) was used to obtain classification accuracy. The results showed a classification accuracy of 98.31% with only two errors of the experimental validation with this data set. It is concluded that this methodology is a useful tool for detecting the presence of these ions in aqueous samples with MoS2-2D.
Anthocyanins from maqui (Aristotelia chilensis) and blackberry (Rubus glaucus) were used as light harvesters to improve the photocatalytic activity of titanium dioxide in visible light. Anthocyanins from both species were obtained using high-frequency ultrasound-assisted liquid-liquid extraction with methanol. Mixtures of anthocyanins were developed to study their effectiveness in the visible light/TiO2 reaction for the oxidation of aniline blue. For this purpose, stainless-steel foams were covered with TiO2 and anthocyanin and characterized by SEM. Different samples were fabricated by varying the ratio of the two anthocyanins in the mixture (100, 75, 50, 25 and 0 vol% of maqui-anthocyanin (delphinidin)). The mixtures of 25 vol% anthocyanin from maqui and 75 vol% anthocyanin from blackberry had higher total anthocyanin content and better photocatalytic activity in visible light: degradation of aniline blue was 40% at pH 7, 56% at pH 3 and 95% at pH 3 with the injection of oxygen for 2 h in comparison with TiO2-foam/UV light, which yielded values of 13% at pH 7 and 73% at pH 3 with and without the addition of oxygen. Natural dyes that are low-cost and environmentally friendly substances are shown to be capable of improving the visible-light photocatalytic activity of TiO2.
1 February 2018 in Fullerenes, Nanotubes and Carbon Nanostructures
A short-time and low-cost synthesis route was used to produce large lateral size (from 2 to 15 μm) from monolayers to few layers of graphene by a two-step process of electrochemical exfoliation with a deep eutectic solvent in a mixture with water that can be reused, and ultrasonic bath. The graphene was characterized by SEM, TEM, AFM, Raman and electrochemical activity. During the electrochemical exfoliation, high expanded graphene particles were obtained and these were dispersed in a mixture of water with 5%wt ethylene glycol by an ultrasonic bath in order to complete the exfoliation process. An enhancement of the electrical conductivity of these dispersions was obtained with the increase of graphene concentration, 0.38 mg/mL, which best result was achieved with 30 wt% water and a DC voltage of 10 V. It was possible to add a conductive layer to a glass substrate with the graphene obtained and Tyndall effect was observed.
3 February 2015 in Chemical Engineering & Technology