For the investigation of geographical, monthly, seasonal, and annual distributions of aridity and its annual trend in the region of the Central and Southern Pannonian Basin (CSPB), which includes the territories of Hungary and Vojvodina (Northern Serbia), the De Martonne Aridity Index (DMAI) was used. The DMAI was originally calculated from a total of 78 meteorological stations with the maximum available time series of climatological data in three cases: 1931–2017 for Hungary; 1949–2017 for Vojvodina; and 1949–2017 for Hungary and Vojvodina jointly. The Palmer Drought Severity Index (PDSI) was used to control the DMAI results. Temperature and precipitation trends were also investigated to understand their effects on the aridity trend. Three aridity types are distinguished on the annual level, five on the seasonal level, and four on the monthly level. The annual aridity had no trends in all three periods. It seems that aridity can be considered a more stable climate indicator of climate change than the temperature, at least in the CSPB.

Suspended solids in the injection water cause impairment of water injectivity during waterflooding operations. Suspended solids affect reservoir properties and decrease the permeability of reservoir rocks causing an increase of injection pressure and a decrease in water injectivity. Removal of all suspended solids from injection water is an expensive and economically unfeasible process. To minimize the effects of suspended solids to the formation, it is necessary to determine an impairment mechanism of suspended solids on oil displacement and, therefore, optimize the water treatment process. In this paper, an analytical model that describes the relationship between injection water quality and impairment mechanisms on oil displacement is presented. A formation impairment was calculated, introducing the parameter called impairment ratio, which represents the ratio between suspended solids and pore size distribution of reservoir rock. Based on the impairment ratio, decreases in porosity and permeability were calculated with changes in capillary pressure, relative permeability, and displacement efficiency. The model was tested for three different types of injection water. Results indicated the presence of formation impairment even with the smallest particles. Suspended solids had the greatest influence on porosity and permeability impairment. The model could be used as input for reservoir modelling studies for monitoring and controlling displacement efficiency during waterflooding as well as for planning and modification of water treatment units.