HfO 2 -ZrO 2 superlattice (SL) ferroelectric (FE) capacitor is demonstrated to have improved endurance performance and higher fatigue recovery capability compared to the HfZrO x (HZO) device. During the cycling of polarization ( ${P}$ ) vs. voltage ( ${V}$ ) loops, the SL metal-FE-metal (MFM) capacitor exhibits the higher ${P}$ and the lower leakage current over the HZO device indicating the lower defect density in SL. The SL capacitor achieves an endurance of ${5}\times {10} ^{{12}}$ cycles, which is three orders of magnitude higher than the HZO device. The ${P}$ fatigue of the SL capacitor can be fully recovered through a ~30 s break, and that of HZO is only partially recovered utilizing the higher field cycling. This is because the trapping/detrapping process significantly decreases in HfO 2 -ZrO 2 SL over HZO capacitor by the reduced defect density. These results prove that the HfO 2 -ZrO 2 SL is a promising technology for endurance unlimited FE random access memory.
The characterization of ferroelectricity in ultra-thin ferroelectric (FE) films is highly challenging due to enlarged leakage current and resistive switching (RS) effect. In this study, we investigated the polarization switching properties of 1.5-nm thick Hf 0.5 Zr 0.5 O 2 (HZO) films via direct hysteresis remnant polarization/voltage (P-V) loop measurement. To reduce the leakage current and eliminate the RS effect, positive-up-negative-down (PUND) measurement was implemented on back-to-back connected complementary cells. Rational hysteresis loops, with remnant polarization of approximately 2 μC/cm 2 , were successfully obtained by directly measuring the polarization switching currents. In this study, we provide direct evidence of the stable ferroelectric property in 1.5-nm thick HZO films, and thereby show a potential prospect of ultimate scalability of HZO films.
GeTe-Sb2Te3 pseudobinary system, especially Ge2Sb2Te5 alloy, is the most desirable material to be commercialized in phase change random access memory. Directly resolving the local atomic arrangement of Ge2Sb2Te5 during intermediate steps is an effective method to understand its transition mechanism from face-centered-cubic to hexagonal phases. In this study, we provide insights into the atomic arrangement variation during face-centered-cubic to hexagonal transition process in Ge2Sb2Te5 alloy by using advanced atomic resolution energy dispersive X-ray spectroscopy. Induced by thermal annealing, randomly distributed germanium and antimony atoms would migrate to the specific (111) layer in different behaviors, and antimony atoms migrate earlier than germanium atoms during the phase transition process, gradually forming intermediate structures similar to hexagonal lattice. With the migration completed, the obtained stable hexagonal structure has a partially ordered stacking sequence described as below: -Te-Sbx/Gey-Te-Gex/Sby-Te-Gex/Sby-Te-Sbx/Gey-Te- (x > y), which is directly related to the migration process. The current visual fragments suggest a gradual transition mechanism, and guide the performance optimization of Ge2Sb2Te5 alloy.
128 Mb Phase Change Memory (PCM) chips show potential for many applications in artificial intelligence. A PCM cell often has a sandwich structure that consists of a TiN bottom electrode, a phase change material, and a top metal. TiN films prepared by atomic layer deposition have high thermal stability, and a WN coating layer on the TiN electrode can prevent oxidation in the electric and thermal field, achieving high endurance of the TiN electrode over 1011 cycles. In the phase change material of carbon-doped Ge2Te2Te5 (CGST), C–C chains and C clusters precipitate at the Ge2Te2Te5 (GST) grain boundaries, which effectively refines the grain size of GST. The C confinement enhances the Ge/Sb atomic migration barrier and suppresses the composition segregation in the Reset/Set operation process and the atomic relaxation of the CGST material. As a result, the endurance and conductivity-drift of the PCM chip were enhanced. Finally, stability over 5 × 108 cycles and 12 multi-level stable states were achieved in the 128 Mb PCM chip. This work presents a step towards the realization of large-scale and energy-efficient neuromorphic computing systems.
7 June 2023 in IEEE Transactions on Electron Devices
In this brief, we report that HfO 2 –ZrO 2 superlattice (SL) ferroelectric field-effect transistors (FeFETs) demonstrate improved endurance, fatigue recovery, and retention performance compared to the HfZrO x (HZO) control devices. During the program/erase (P/E) cycling and data retention, the density of interface traps is observed to increase less in the SL FeFETs than in the HZO transistors. This is due to the larger effective equivalent oxide thickness (EOT) of the SL, which reduces the electric field dropped at the SiO 2 interfacial layer (IL) in the SL transistor during P/E operations, thereby weakening the generation of interface traps and mitigating memory window (MW) degradation in SL devices. After undergoing 10 10 P/E cycles, the SL FeFET still achieved an MW above 500 mV with fatigue recovery.
Phase change random access memory (PCRAM) has gained much attention as a candidate for nonvolatile memory application. To develop PCRAM materials with better properties, especially to draw closer to dynamic random access memory (DRAM), the key challenge is to research new high-speed phase change materials. Here, Scandium (Sc) has been found it is helpful to get high-speed and good stability after doping in Sb2Te alloy. Sc0.1Sb2Te based PCRAM cell can achieve reversible switching by applying even 6 ns voltage pulse experimentally. And, Sc doping not only promotes amorphous stability but also improves the endurance ability comparing with pure Sb2Te alloy. Moreover, according to DFT calculations, strong Sc-Te bonds lead to the rigidity of Sc centered octahedrons, which may act as crystallization precursors in recrystallization process to boost the set speed.