Mark Adams

Prof. Mark Adams

Department of Electrical and Computer Engineering, Auburn University, 403 Broun Hall, Auburn University, Auburn, 36849-5201 Alabama, USA
orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 November 2023 in IEEE Journal on Miniaturization for Air and Space Systems
Verified
Journal Article
Closed access
DHDaylon Hester
Daylon Hester
SHSeokhee Han
Seokhee Han
Mark AdamsMark Adams
Mark Adams
This paper presents a streamlined design methodology for single-feed circularly polarized antenna arrays for CubeSats. The presented method was created with student-led teams in mind and employs a geometrically simple approach, opting for circular patches and ring-shaped feed networks instead of complex geometries. High and low-impedance radiating elements are designed, and design restrictions are introduced such that all other geometries may be solved through a set of simple cascading equations. These deliberate choices minimize the number of design parameters and simplify the design process. Circular polarization is achieved through a multilevel implementation of sequentially arranged linearly polarized circular patches fed in a series-parallel fashion by ring-shaped feed lines of constant impedance. This paper also demonstrates a 4×4 right-hand circularly polarized (RHCP) CubeSat downlink array antenna designed for operation in the 8025-8400 MHz Earth exploration satellite band which was developed using the proposed methodology. The antenna comprises four sequentially rotated RHCP sub-arrays, each consisting of four sequentially rotated linearly polarized circular patches. The antenna’s boresight RHCP gain exceeds 16.19 dBic at 8.389 GHz with a simulated 27.9% 3 dB axial ratio bandwidth, a 20 degree half-power beamwidth, and an aperture efficiency of 53%. The antenna has a sub-2 VSWR bandwidth of 26.6%, and its radiation efficiency ranges from 60-82% across the target band. Its compact size of 9 cm × 9 cm enables it to fit on one face of a 10 cm × 10 cm CubeSat unit.

8 October 2018 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
JPJ. Craig Prather
J. Craig Prather
MBMichael Bolt
Michael Bolt
THTyler Horton
Tyler Horton
BBBrent Bottenfield
Brent Bottenfield
SWStuart Wentworth
Stuart Wentworth
Mark AdamsMark Adams
Mark Adams
This paper discusses the design and implementation of a biomimetic, flexible antenna system consisting of flexible dipoles on Pyralux AP. They are implemented into a novel, airborne atmospheric sensor system. The antennas and substrate serve a secondary function as a rotor system, forcing the sensor nodes to auto-rotate when falling to maximize drag and decrease their fall speed. The designed antenna system works both in the industrial, scientific, and medical (ISM) band and the GPS L1 band with the designed antennas having bandwidths of 100 MHz and 130 MHz respectively. This paper also presents a test procedure to characterize antenna performance at different bend angles.

14 October 2019 in IEEE Transactions on Components, Packaging and Manufacturing Technology
Verified
Journal Article
Closed access
BBBrent Bottenfield
Brent Bottenfield
ABArthur Gernt Bond
Arthur Gernt Bond
MKMichael S. Kranz
Michael S. Kranz
RDRobert Neal Dean
Robert Neal Dean
Mark AdamsMark Adams
Mark Adams
This paper details the design, simulation, fabrication, and testing of four variations of micromachined vibration isolators. The vibration isolators serve as low pass filters to attenuate high frequency (>2 kHz) mechanical excitation in order to improve both MEMS sensor fidelity and lifespan. Isolators are designed for integration with a small (∼3mm × ∼3mm) MEMS sensor package and boast a sub-1 cm2 footprint (7mm × 7mm). For all isolator variations, the fundamental geometry consists of an outer frame to be fixed to the substrate of interest, a central platform to accommodate the isolated sensor, and springs for attachment of the frame and platform. We fabricate devices via a simple, double-sided lithography process using < 100 > silicon-on-insulator (SOI) wafers. We then performed laser Doppler vibrometry to investigate the frequency response of each isolator variation across a 6.2 kHz bandwidth. Dependent upon geometry, isolator variations exhibit resonant frequencies from 1.3 kHz to 2 kHz with quality factors (Qs) ranging from 16.7 to 60.

31 August 2022 in IEEE Journal on Miniaturization for Air and Space Systems
Verified
Journal Article
Closed access
ELEmma Little
Emma Little
DHDaylon Hester
Daylon Hester
ARAndrew Ray
Andrew Ray
DADrew Addison
Drew Addison
MFMichael Fogle
Michael Fogle
Mark AdamsMark Adams
Mark Adams
This article details the design, implementation, and validation of a 3-axis magnetic field simulator for hardware testing. In particular, it aims to simulate the magnetic fields experienced by a 12U CubeSat, a nanosatellite model, in low-Earth orbit using a Helmholtz cage to test its attitude determination and control subsystem. The design process and accompanying hardware system are described in detail. The system is judged on the uniformity and accuracy of its generated magnetic fields with reference to goal values and simulated orbit conditions.

29 January 2021 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
VGVaibhav Gupta
Vaibhav Gupta
Mark AdamsMark Adams
Mark Adams
JSJohn A. Sellers
John A. Sellers
NNNoah Niedzwiecki
Noah Niedzwiecki
NRNick Rush
Nick Rush
MHMichael C. Hamilton
Michael C. Hamilton
We have investigated $\text{Al}_{2}\text{O}_{3}$ as a thin interface material between Nb and polyimide, deposited using a relatively low temperature thermal atomic layer deposition (ALD) process to preserve the superconducting properties of the Nb layer. 250 nm thick Nb traces, with ˜ 20 nm thick layers of Al2O3 were used for this work. HD-4110 spin-on polyimide by HD MicroSystems with a thickness of ˜ 20 μm was used with different curing temperatures of 225 °C and 375 °C. DC electrical characterization of patterned Nb lines were carried out using a pulse-tube based cryostat to determine $T_{c}$ and $I_{c}$ for the samples at different steps in the fabrication process. Details of the fabrication processes, experimental procedures and performance results are included. Results of these experiments provide insight into materials stack-ups and fabrication process options for robust, multi-layer superconducting flexible cables that can be used for signal transmission in future denselyintegrated cryogenic electronics systems.

4 December 2017 in IEEE Geoscience and Remote Sensing Letters
Verified
Journal Article
Closed access
MBMichael Bolt
Michael Bolt
JPJ. Craig Prather
J. Craig Prather
HHHaley Harrell
Haley Harrell
THTyler Horton
Tyler Horton
JMJohn Manobianco
John Manobianco
Mark AdamsMark Adams
Mark Adams
The design and test results are presented for a novel in situ atmospheric probe, called an environmental mote or eMote. This lightweight airborne atmospheric sensing mote has been designed for mass deployment over weather events of interest as part of a system known as GlobalSense, which aims to provide weather data with high spatial and temporal density. This letter describes the initial eMote design and ground-based test results of meteorological sensing functions. Future work to improve upon the system and move toward large-scale testing is outlined.