Environmental emergency awareness has been gaining momentum in recent years in the composite manufacturing industry, with a new generation of composite materials minimizing their harmful environmental impacts by employing more sustainable manufacturing processes and, where possible, replacing synthetic materials with more sustainable bio-based materials, thus more efficiently using energy and material resources. In this context, natural fiber composites are proposed as appealing candidates to replace or reduce the use of synthetic fibers for reinforcing polymers in several industrial fields, such as the marine sector, where composite usage has been extensively studied in recent years. This review aims to present a thorough overview of the usage of natural fiber composites for marine applications, discussing the most relevant criteria required for applications where water exposure is expected. For this purpose, the review outlines the natural fibers and matrices used, analyzes the resultant composites’ mechanical properties, and presents the fiber treatments required before manufacturing, as well as the main manufacturing processes adopted for natural fiber composite production. The advantages and disadvantages of natural fibers compared to synthetic fibers are also presented, including economic and environmental credentials. Finally, a list of marine components with natural fiber reinforcements developed in recent years is reported.

Fibre-reinforced plastic (FRP) materials are attracting growing interest because of their high specific mechanical properties. These characteristics, in addition to a high level of tailorability and design of freedom, make them attractive for marine, aerospace, automotive, sports and energy applications. However, the large use of this class of material dramatically increases the amount of waste that derives from end-of-life products and offcuts generated during the manufacturing processes. In this context, especially when thermosetting matrices are considered, the need to deeply study the recycling process of FRPs is an open topic both in academic and industrial research. This review aims to present the current state of the art of the most affirmed recycling technologies used for polymeric composites commonly used in industrial applications, such as carbon and glass FRPs. Each recycling method (i.e., chemical, thermal and mechanical) was analysed in terms of technological solutions and process parameters required for matrix dissolution and fibre recovery, showing their advantages, drawbacks, applications and properties of the recycled composites. Therefore, the aim of this review is to offer an extensive overview of the recycling process of polymeric composite materials, which is useful to academic and industrial researchers that work on this topic.

In this paper, for the first time, inexpensive waterglass solutions are exploited as a new, simple and ecofriendly chemical approach for promoting the formation of a silica-based coating on hemp fabrics, able to act as a thermal shield and to protect the latter from heat sources. Fourier Transform Infrared (FTIR) and solid-state Nuclear Magnetic Resonance (NMR) analysis confirm the formation of –C–O–Si– covalent bonds between the coating and the cellulosic substrate. The proposed waterglass treatment, which is resistant to washing, seems to be very effective for improving the fire behavior of hemp fabric/epoxy composites, also in combination with ammonium polyphosphate. In particular, the exploitation of hemp surface treatment and Ammonium Polyphosphate (APP) addition to epoxy favors a remarkable decrease of the Heat Release Rate (HRR), Total Heat Release (THR), Total Smoke Release (TSR) and Specific Extinction Area (SEA) (respectively by 83%, 35%, 45% and 44%) as compared to untreated hemp/epoxy composites, favoring the formation of a very stable char, as also assessed by Thermogravimetric Analysis (TGA). Because of the low interfacial adhesion between the fabrics and the epoxy matrix, the obtained composites show low strength and stiffness; however, the energy absorbed by the material is higher when using treated hemp. The presence of APP in the epoxy matrix does not affect the mechanical behavior of the composites.

Carbon fiber-reinforced plastics (CFRPs) are composite materials that play a significant role in the growth of many industrial fields where high performance and lightness of the structures are required. At the same time, the management at the end of their life has required the development of more and more sustainable and efficient recycling solutions. Considering this, the present research work aims to investigate a mechanical recycling method and the cutting strategies able to machine CFRP components in their entirety, using a common milling machine in a job shop scheme, making a shorter supply chain, and leading to economic and environmental benefits. In detail, laminates obtained by unidirectional carbon fiber prepregs were worked through the peripheral down-milling process, by varying the spindle speed and the feed rate. The recording of the cutting forces enabled the evaluation of features such as the cutting power and the specific cutting energy. Moreover, the chips from the milling process were classified as a function of their dimensions. Finally, specimens made of chips and epoxy resin were characterized under bending conditions, to evaluate the effectiveness of using the chips from CFRP peripheral milling as the polymer’s reinforcement and, in addition, to appreciate the goodness of this recycling strategy.

Hemp and flax fibers are among the most interesting vegetable fibers that can be used to reinforce polymeric matrices. In line with the global environmental requests, the use of these fibers especially coupled with thermoforming polymers are increasing more and more in order to expand their applications and replace synthetic fibers and thermosetting plastics. However, one of the major limitations of vegetable fibers is their poor adhesion with polymeric matrices that is often overcome by fibers chemical treatments or by using coupling agents within the matrix. Aiming to produce polypropylene (PP) bio composite laminates reinforced by hemp and flax fibers without additional process steps, this paper deals on the study of their production via the compression molding technique by using woven fabrics characterized by a large mesh size able to ensure a mechanical anchoring between fibers and matrix. Two different forming strategies that differ in the time required for reaching the maximum values of compression pressure and in the dwelling time at this value were used in order to investigate how the yarn impregnation was affected by them. To expand the applications of composites under investigation, tensile, bending, Izod, heat deflection temperature (HDT) and bearing tests were carried out. The results highlighted how the use of a waiting time before the reaching of the maximum moulding pressure allowed a better matrix flow within the vegetable yarn leading to higher mechanical performances.