Global warming and the associated increase in heat-waves have made the prevention of heatrelated illnesses such as heatstroke a critical global challenge. Monitoring physiological indicators such as core body temperature, heart rate, and sweat rate is beneficial for preventing excessive accumulation of heat stress and ensuring safe activities in hot environments. However, existing methods typically require multiple separate sensors, limiting their practicality for real-world applications. In this study, we describe the development of a compact and easy-to-use wearable multimodal sensor probe capable of simultaneously measuring the core body temperature, electrocardiogram, heart rate, and sweat rate. The prototype features an innovative design that integrates a heat flux probe for simultaneous measurement of the core body temperature and cardiac potentials with a computational model for estimating the sweat rate. Validation experiments were conducted with ten healthy adult men performing cycling exercises under controlled environmental conditions, with the accuracy of each measurement obtained from the prototype evaluated by comparison with reference values. The results showed root mean squared errors of 0.087°C for core body temperature and 131 g for total water loss, both surpassing the accuracy of previous studies. However, the prototype exhibited a tendency to overestimate the core body temperature and sweat rate during the exercise and post-exercise recovery phases compared to the resting condition before exercise. This was attributed to thermoregulatory responses, such as evaporative heat loss from sweating and increased skin blood flow, during exercise and recovery. Despite some remaining challenges in validation, this study represents a significant advancement in wearable sensor technology by offering a practical and comprehensive solution for real-time monitoring in hot environments. The proposed system has the potential to contribute to heat stress prevention in occupational, sports, and everyday settings.
Core body temperature (CBT) is one of the useful physiological indicators that are linked to physiological changes. Wearable sensors are expected to be developed to monitor CBT easily during activities. A single-heat-flux method is one of the noninvasive techniques that estimate CBT by measuring heat flow changes near the skin with temperature sensors. The method requires calibrating parameters for estimating CBT in advance by comparing them with reference values obtained through another method. The invasive measurement method is generally used to obtain the reference values, which poses a challenge in terms of measurement burden. Here, we propose a new calibration method that does not require acquiring reference values. This method identifies calibration parameters based on the temperature history after the measurement probe is attached. It has been numerically and experimentally confirmed that the estimation accuracy by the method is equivalent to that of a general-purpose electronic thermometer. This outcome decreases the measurement workload in CBT measurement using the single-heat-flux method and significantly enhances its usability.
This study presents a reference-free calibration method for wearable core body temperature sensors based on the single-heat-flux approach, eliminating the need for a pre-constructed dataset and reducing the required calibration time. In conventional single-heat-flux methods, calibration relies on invasive measurements or numerically generated datasets and typically requires at least 1 h, posing practical challenges. In contrast, the proposed method identifies calibration parameters directly from measured temperature data within approximately 1500 s, which is much quicker than the 3600 s required by existing methods. We validated our method through numerical simulations considering factors such as skin thickness and acceptable measurement errors. These simulations confirmed that the proposed approach reliably achieves adequate calibration without prior dataset construction. Furthermore, we conducted a human subject experiment under resting conditions, where ambient and core body temperature fluctuations, along with heat tolerance responses, were minimal. The results demonstrate that our method can achieve clinically sufficient accuracy in estimating core body temperature, even in the presence of environmental perturbations such as introduced airflow. While the proposed method currently assumes stable conditions and may face challenges in highly dynamic environments involving intense physical activity or significant thermal changes, it marks a critical step toward more accessible and practical wearable core body temperature monitoring. Future work will focus on validating the method with a larger cohort of subjects and integrating additional physiological sensors to enhance reliability and broaden applicability.
18 May 2020 in Journal of Ambient Intelligence and Humanized Computing
Ten thousand children are admitted to emergency rooms due to accidents every year in Tokyo. The most frequent accident is a fall accident. Fall accidents may occur when climbing to a high place in a daily living space. Since injury prevention by human supervision does not work well, the World Health Organization recommends an environmental modification approach as an effective preventive countermeasure to this problem. Predicting children’s behavior is necessary in order to improve the environment. However, even for advanced human modeling technology, predicting where children can climb in everyday life situations remains difficult. In the present study, the authors developed a new method for predicting places that children can climb in a data-driven manner by integrating cameras, a behavior recognition system (OpenPose), and a climbing motion planning algorithm based on a rapidly exploring random tree. Thirty five children participated in an experiment to collect climbing posture data. A simulation is performed based on the posture database and allows us to visually understand how children climb up in daily living space. This makes it possible to improve to achieve a safe environment for children without the need for specialized knowledge, which is useful for parents, nursery teachers, nurses, etc. The present paper describes fundamental functions of the developed system and presents an evaluation of the feasibility of the prediction function.
As the world’s population ages, technology-based support for the elderly is becoming increasingly important. This study analyzes the relationship between natural standing behavior measured in a living space of elderly people and the classes of standing aids, as well as the physical and cognitive abilities contributing to household fall injury prevention. In total, 24 elderly standing behaviors from chairs, sofas, and nursing beds recorded in an RGB-D elderly behavior library were analyzed. The differences in standing behavior were analyzed by focusing on intrinsic and common standing aid characteristics among various seat types, including armrests of chairs or sofas and nursing bed handrails. The standing behaviors were categorized into two types: behaviors while leaning the trunk forward without using an armrest as a standing aid and those without leaning the trunk forward by using an arrest or handrail as a standing aid. The standing behavior clusters were distributed in a two-dimensional map based on the seat type rather than the physical or cognitive abilities. Therefore, to reduce the risk of falling, it would be necessary to implement a seat type that the elderly can unconsciously and naturally use as a standing aid even with impaired physical and cognitive abilities.