In a solid-stage photonics-based Lidar, all essential components are integrated into a silicon chip using silicon photonic technique. It is preferable to implement Lidar's beam steering through wavelength tuning due to its simplicity. However, a large wavelength tuning range is usually required to generate a satisfactory beam-steering angle, which usually is constrained by the limited material and waveguide dispersion. In silicon-on-insulator (SOI) waveguide, the effective index of the transverse-electric (TE) mode is significantly different from that of the transverse-magnetic (TM) mode. This allows us to design a novel device that is composed of two grating couplers optimized for two orthogonal polarizations. Two beams diffracted from two grating couplers with the orthogonal polarization can be seamlessly merged together. Combining these two orthogonally-polarized output beams significantly increases the beam-steering angle and dramatically reduces the required wavelength-tuning range.
In this paper, we propose an Si3N4/SiO2 horizontal-slot-waveguide-based polarization beam splitter (PBS) with low nonlinearity for on-chip high-power systems. The coupling length ratio between the quasi-TE and quasi-TM modes (LTE/LTM) was optimized to 2 for an efficient polarization splitting. For the single-slot design, the coupling length of the PBS was 281.5 μm, while the extinction ratios (ER) of the quasi-TM and quasi-TE modes were 23.9 dB and 20.8 dB, respectively. Compared to PBS based on the Si3N4 strip waveguide, the coupling length became 22.6% shorter. The proposed PBSs also had a relatively good fabrication tolerance for an ER of >20 dB. For the multi-slot design, the coupling length of the PBS was 290.3 μm, while the corresponding ER of the two polarizations were 24.0 dB and 21.0 dB, respectively. Furthermore, we investigated the tradeoff between the ER and coupling length for the optimized PBSs with single slot or multiple slots.
10 December 2021 in Journal of Lightwave Technology
Laser diodearray and photo diode array combined through coarse wavelength division multiplexed (CWDM) are widely used in short-reach optical communication within massive web-scale data center. Those components can be used in solid-state photonics-based Lidar built upon silicon-on-insulator (SOI) waveguide as well, achieving significant cost saving. Beam steering can be naturally achieved through diffraction in output grating couplers. However, current design is hampered by low angular resolution. We demonstrate a novel design by combining outputs of two grating couplers with orthogonal polarizations in an interleaving manner. This scheme effectively doubles the angular resolution of on-chip Lidar.
By using wavelength division multiplexed (WDM) laser array developed for optical communication, a novel low-cost solid-state Lidar is designed for TE polarized beams counter-propagating towards each other, which can achieve a large 26-degree angle of view with 60-nm wavelength separation range from WDM laser array.
A novel solid-state Lidar is designed using two TE polarized beams counter-propagating towards each other. Two corresponding output beams can be seamlessly combined, doubling beam steering angle. A 28-degree beam steering range is achieved with a 100-nm wavelength tuning.