In a solid-stage photonics-based Lidar, all essential components are integrated into a silicon chip using silicon photonic technique. It is preferable to implement Lidar's beam steering through wavelength tuning due to its simplicity. However, a large wavelength tuning range is usually required to generate a satisfactory beam-steering angle, which usually is constrained by the limited material and waveguide dispersion. In silicon-on-insulator (SOI) waveguide, the effective index of the transverse-electric (TE) mode is significantly different from that of the transverse-magnetic (TM) mode. This allows us to design a novel device that is composed of two grating couplers optimized for two orthogonal polarizations. Two beams diffracted from two grating couplers with the orthogonal polarization can be seamlessly merged together. Combining these two orthogonally-polarized output beams significantly increases the beam-steering angle and dramatically reduces the required wavelength-tuning range.
10 December 2021 in Journal of Lightwave Technology
Laser diodearray and photo diode array combined through coarse wavelength division multiplexed (CWDM) are widely used in short-reach optical communication within massive web-scale data center. Those components can be used in solid-state photonics-based Lidar built upon silicon-on-insulator (SOI) waveguide as well, achieving significant cost saving. Beam steering can be naturally achieved through diffraction in output grating couplers. However, current design is hampered by low angular resolution. We demonstrate a novel design by combining outputs of two grating couplers with orthogonal polarizations in an interleaving manner. This scheme effectively doubles the angular resolution of on-chip Lidar.
Coarse wavelength division multiplexing (CWDM) technology has been widely used in short-reach optical communication systems. By using the same technology in a solid-state photonics-based Lidar, one can achieve significant cost reduction. Beam steering is realized through diffraction of light wave upon grating couplers. However, current design has a small viewing angle and a low angular resolution. We propose a configuration based on Silicon-on-Insulator (SOI) waveguide grating coupler. The viewing angle is increased by 2.5 times with light signals propagating bidirectionally. The angular resolution is doubled through interleaving beams with trans-electrical (TE) polarization and beams with trans-magnetic (TM) polarization. By optimizing the design of a single grating coupler, the output beams are evenly distributed and the transmittance is improved. With 4 CWDM lasers being the source, a 34° beam angle of view and an angular resolution of 1.9° are demonstrated.
By using wavelength division multiplexed (WDM) laser array developed for optical communication, a novel low-cost solid-state Lidar is designed for TE polarized beams counter-propagating towards each other, which can achieve a large 26-degree angle of view with 60-nm wavelength separation range from WDM laser array.
A novel solid-state Lidar is designed using two TE polarized beams counter-propagating towards each other. Two corresponding output beams can be seamlessly combined, doubling beam steering angle. A 28-degree beam steering range is achieved with a 100-nm wavelength tuning.