Natural fibers today are a popular choice for applications in composite manufacturing. Based on the sustainability benefits, biofibers such as plant fibers are replacing synthetic fibers in composites. These fibers are used to manufacture several biocomposites. The chemical composition and properties of each of the fibers changes, which demands the detailed comparison of these fibers. The reinforcement potential of natural fibers and their properties have been described in numerous papers. Today, high performance biocomposites are produced from several years of research. Plant fibers, particularly bast and leaf, find applications in automotive industries. While most of the other fibers are explored in lab scales they have not yet found large-scale commercial applications. It is necessary to also consider other fibers such as ones made from seed (coir) and animals (chicken feather) as they are secondary or made from waste products. Few plant fibers such as bast fibers are often reviewed briefly but other plant and animal fibers are not discussed in detail. This review paper discusses all the six types of plant fibers such as bast, leaf, seed, straw, grass, and wood, together with animal fibers and regenerated cellulose fibers. Additionally, the review considers developments dealing with natural fibers and their composites. The fiber source, extraction, availability, type, composition, and mechanical properties are discussed. The advantages and disadvantages of using each biofiber are discussed. Three fabric architectures such as nonwoven, woven and knitted have been briefly discussed. Finally, the paper presents the overview of the results from the composites made from each fiber with suitable references for in-depth studies.

Nowadays, there is greater demand for greener materials in societies due to environmental consciousness, depleting fossil fuels and growing ecological concerns. Within the foreseeable future, industries and suppliers will be required to be more aware of challenges faced due to the availability of resources and use more sustainable and renewable raw materials. In this context, cellulose can be expected to become a vital resource for materials owing to its abundance, versatility as a biopolymer, several different forms and potential applications. Thus, all-cellulose composites (ACCs) have gained significant research interest in recent years. ACC is a class of biocomposites in which the matrix is a dissolved and regenerated cellulose, while the reinforcement is undissolved or partly dissolved cellulose. This review paper is intended to provide a brief outline of works that cover recent progress in the manufacturing and processing techniques for ACCs, various cellulose sources, solvents and antisolvents, as well as their properties.

The possibility of recycling glass fibre-reinforced composites by using microwave pyrolysis was examined. A scrap blade from a wind turbine was fragmented and microwave-pyrolysed. The glass fibre recovered after pyrolysis represented 70% of the initial mass of glass fibre-reinforced composites. The tensile strength of the glass fibre recovered was measured after pyrolysis and compared to the tensile strength of untreated glass fibre. The test showed that the fibres lost about 25% of their tenacity. Non-woven fibre mats were prepared from the recovered fibres. Laminates were then prepared from the non-woven mats obtained, together with virgin glass fibre mats. Mechanical testing of the laminates showed that it is possible to prepare composites using 25 wt% of recycled fibres, with relatively good mechanical properties.