Water application uniformity is an important performance parameter when designing and operating an irrigation system. Performance tests of a center pivot irrigation system equipped with fixed and rotated spray plate sprinklers (FSPS and RSPS, respectively) were conducted at five travel speeds. The effects of travel speed, collector size, and setting height on water application uniformity were evaluated using Heermann and Hein’s coefficient of uniformity (CUH). The CUH was 12.7% higher for the RSPS than the FSPS and decreased as the travel speed increased. Collector size and setting height affected CUH, and CUH was higher when the collector had a large opening cross-section compared to the collector with a small opening cross-section. CUH was higher when the collector with a low setting height compared to when it a high setting height for the FSPS. However, collector setting height had no effect on CUH for the RSPS. The weighted average water application depth (Dw) decreased as the travel speed increased. Collector size had no significant effect on Dw, but Dw with a low collector setting height was larger than the values with a high collector setting height. The water application rate increased as distance from the pivot point increased and was higher for the FSPS than the RSPS. The results will improve the selection of travel speed and collector when the water application uniformity of a center pivot irrigation system is evaluated.
1 December 2025 in Journal of Physics: Conference Series
Surge tanks are crucial pressure-regulating components in pumped-storage power stations, ensuring system safety and operational stability. Integrating long lateral pipes with surge tanks offers engineering advantages, including compact structural dimensions and reduced costs, yet introduces challenges such as amplified hydraulic inertia and dynamic complexities in unit operation. Therefore, investigating the regulating characteristics of pumped-storage power stations under the coupling of long lateral pipes with different surge tank types (impedance-type, differential-type, and air cushion-type) and identifying the optimal surge tank type for integration is urgently needed. This study systematically analyzes the impacts of long lateral pipes coupled with impedance-type, differential-type, and air cushion-type surge tanks on station safety and stability. We refine the geometric parameters of each tank-pipe configuration, aiming to enhance hydrodynamic performance. Post-optimization simulations quantified operational indicators, which were normalized against baseline conditions (without long lateral pipes) to establish a dimensionless scoring system. Results reveal that differential surge tanks achieved superior hydrodynamic coupling with lateral pipes, yielding the lowest regulating characteristic index, outperforming air cushion and impedance tanks. These findings provide actionable insights for surge tank selection and design optimization in hybrid pipe-tank systems, advancing the reliability and efficiency of pumped-storage infrastructure.