Photoelectric encoders are widely used in high-precision measurement fields such as industry and aerospace because of their high precision and reliability. In order to improve the subdivision accuracy of moiré grating signals, a particle swarm optimization compensation model for grating the subdivision error of a photoelectric encoder based on parallel iteration is proposed. In the paper, an adaptive subdivision method of a particle swarm search domain based on the honeycomb structure is proposed, and a raster signal subdivision error compensation model based on the multi-swarm particle swarm optimization algorithm based on parallel iteration is established. The optimization algorithm can effectively improve the convergence speed and system accuracy of traditional particle swarm optimization. Finally, according to the subdivision error compensation algorithm, the subdivision error of the grating system caused by the sinusoidal error in the system is quickly corrected by taking advantage of the high-speed parallel processing of the FPGA pipeline architecture. The design experiment uses a 25-bit photoelectric encoder to verify the subdivision error algorithm. The experimental results show that the actual dynamic subdivision error can be reduced to ½ before compensation, and the static subdivision error can be reduced from 1.264″ to 0.487″ before detection.
8 April 2021 in Journal of Advanced Transportation
The machining accuracy of the compensation hole of the automobile brake master cylinder directly determines the safety of the automobile and the reliability of parking. How to detect the parameters of the compensation hole with high precision becomes a crucial issue. In this paper, by analyzing the principle of Hough transform detection technology and several optimization algorithms, a new method combining Zernike moment and improved gradient Hough transform is proposed to detect the circular hole parameters. The simulation experiment shows that the proposed algorithm satisfies 0.1 pixels in the coordinate detection of the center position, and the radius detection accuracy is 0.05 pixels, with fast detection speed and good robustness. Compared with the random Hough transform algorithm and the gradient Hough transform algorithm, the algorithm proposed in this paper has higher detection accuracy, faster detection speed, and better robustness, which meets the online detection accuracy requirements of the brake master cylinder compensation hole.
As a precision position sensor, the photoelectric encoder has difficulty avoiding eccentricity or tilt error in the industrial manufacturing and assembly process. At present, manual error correction is often used to adjust. The adjustment efficiency is low, and it has difficulty cooperating with other types of error compensation methods. In view of these problems, we proposed a photoelectric encoder eccentricity error detection and compensation method based on digital signal bandpass filtering that effectively corrects the signal deviation caused by the installation eccentricity in the output signal and judges the direction and magnitude of the eccentricity error to realize the encoding correction of eccentricity and inclination error of the device. The mathematical model of the eccentric error generation principle of the photoelectric encoder combined with the Lissajous figure was derived. We then demonstrated the design of a photoelectric encoder error detection platform to detect photoelectric encoders of different diameters in real time. Finally, using the advantages of field programmable gate array high-speed parallel processing, the error compensation algorithm was written into the development chip to improve the efficiency of processing the encoder output error signal. This method can adapt to the eccentricity error correction and compensation of different models of photoelectric encoders and can greatly improve the efficiency and accuracy compared with previous detection methods.
In aircraft manufacturing, the vertical accuracy of connection holes is important indicator of the quality of holes making. Aircraft products have high requirements for the vertical accuracy of holes positions. When drilling and riveting are performed by an automatic robotic system, assembly errors, bumps, offsets and other adverse conditions, can affects the accuracy of manufacturing and detection, and in turn the fatigue performance of the entire structure. To solve this problem, we proposed a technology for detecting the normal-direction based on the adaptive alignment method, built a mathematical model for posture alignment, and studied the calibration method and mechanism of the detection device. Additionally, we investigated techniques for error compensation using an electronic theodolite and other devices when the adaptive method is used for detection. In verification experiments of the method, multiple sets of results demonstrated that the key technical indicators are as follows: normal accuracy <0.5°, average deviation after correction =0.0667°. This method can effectively compensate the errors affecting hole making work in automated manufacturing, and further improve the positioning accuracy and normal-direction detection accuracy of the robot.
In response to the growing demand for automation in aerospace harness manufacturing, this study proposes a digital twin-based intelligent monitoring system for robotic wiring operations. The system integrates a seven-degree-of-freedom robotic platform with an adaptive servo gripper and employs a five-dimensional digital twin framework to synchronize physical and virtual entities. Key innovations include a coordinated motion model for minimizing joint displacement, a particle-swarm-optimized backpropagation neural network (PSO-BPNN) for adaptive gripping based on wire characteristics, and a virtual–physical closed-loop interaction strategy covering the entire wiring process. Methodologically, the system enables motion planning, quality prediction, and remote monitoring through Unity3D visualization, SQL-driven data processing, and real-time mapping. The experimental results demonstrate that the system can stably and efficiently complete complex wiring tasks with 1:1 trajectory reproduction. Moreover, the PSO-BPNN model significantly reduces prediction error compared to standard BPNN methods. The results confirm the system’s capability to ensure precise wire placement, enhance operational efficiency, and reduce error risks. This work offers a practical and intelligent solution for aerospace harness production and shows strong potential for extension to multi-robot collaboration and full production line scheduling.