Han Hou

Dr. Han Hou

Changchun University of Science and Technology, Changchun, Jilin, China
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 June 2022 in Sensors
Verified
Journal Article
Open access
PDF file
HHHan Hou
Han Hou
GCGuohua Cao
Guohua Cao
HDHongchang Ding
Hongchang Ding
HDHongchang Ding
Hongchang Ding
Photoelectric encoders are widely used in high-precision measurement fields such as industry and aerospace because of their high precision and reliability. In order to improve the subdivision accuracy of moiré grating signals, a particle swarm optimization compensation model for grating the subdivision error of a photoelectric encoder based on parallel iteration is proposed. In the paper, an adaptive subdivision method of a particle swarm search domain based on the honeycomb structure is proposed, and a raster signal subdivision error compensation model based on the multi-swarm particle swarm optimization algorithm based on parallel iteration is established. The optimization algorithm can effectively improve the convergence speed and system accuracy of traditional particle swarm optimization. Finally, according to the subdivision error compensation algorithm, the subdivision error of the grating system caused by the sinusoidal error in the system is quickly corrected by taking advantage of the high-speed parallel processing of the FPGA pipeline architecture. The design experiment uses a 25-bit photoelectric encoder to verify the subdivision error algorithm. The experimental results show that the actual dynamic subdivision error can be reduced to ½ before compensation, and the static subdivision error can be reduced from 1.264″ to 0.487″ before detection.

1 June 2022 in Optical Engineering
Verified
Journal Article
Closed access
PDF file
HHHan Hou
Han Hou
GCGuohua Cao
Guohua Cao
HDHongchang Ding
Hongchang Ding
KLKun Li
Kun Li
CZChangfu Zhao
Changfu Zhao
As a precision position sensor, the photoelectric encoder has difficulty avoiding eccentricity or tilt error in the industrial manufacturing and assembly process. At present, manual error correction is often used to adjust. The adjustment efficiency is low, and it has difficulty cooperating with other types of error compensation methods. In view of these problems, we proposed a photoelectric encoder eccentricity error detection and compensation method based on digital signal bandpass filtering that effectively corrects the signal deviation caused by the installation eccentricity in the output signal and judges the direction and magnitude of the eccentricity error to realize the encoding correction of eccentricity and inclination error of the device. The mathematical model of the eccentric error generation principle of the photoelectric encoder combined with the Lissajous figure was derived. We then demonstrated the design of a photoelectric encoder error detection platform to detect photoelectric encoders of different diameters in real time. Finally, using the advantages of field programmable gate array high-speed parallel processing, the error compensation algorithm was written into the development chip to improve the efficiency of processing the encoder output error signal. This method can adapt to the eccentricity error correction and compensation of different models of photoelectric encoders and can greatly improve the efficiency and accuracy compared with previous detection methods.

26 September 2025 in Sensors
Verified
Journal Article
Open access
PDF file
JCJinhua Cai
Jinhua Cai
HDHongchang Ding
Hongchang Ding
PWPing Wang
Ping Wang
XGXiaoqiang Guo
Xiaoqiang Guo
HHHan Hou
Han Hou
XQXiaoli Qiao
Xiaoli Qiao
In response to the growing demand for automation in aerospace harness manufacturing, this study proposes a digital twin-based intelligent monitoring system for robotic wiring operations. The system integrates a seven-degree-of-freedom robotic platform with an adaptive servo gripper and employs a five-dimensional digital twin framework to synchronize physical and virtual entities. Key innovations include a coordinated motion model for minimizing joint displacement, a particle-swarm-optimized backpropagation neural network (PSO-BPNN) for adaptive gripping based on wire characteristics, and a virtual–physical closed-loop interaction strategy covering the entire wiring process. Methodologically, the system enables motion planning, quality prediction, and remote monitoring through Unity3D visualization, SQL-driven data processing, and real-time mapping. The experimental results demonstrate that the system can stably and efficiently complete complex wiring tasks with 1:1 trajectory reproduction. Moreover, the PSO-BPNN model significantly reduces prediction error compared to standard BPNN methods. The results confirm the system’s capability to ensure precise wire placement, enhance operational efficiency, and reduce error risks. This work offers a practical and intelligent solution for aerospace harness production and shows strong potential for extension to multi-robot collaboration and full production line scheduling.

12 February 2025 in Sensors
Verified
Journal Article
Open access
PDF file
HHHan Hou
Han Hou
HDHongchang Ding
Hongchang Ding
KDKeyan Dong
Keyan Dong
GCGuohua Cao
Guohua Cao
BWBoyuan Wang
Boyuan Wang
Aperture space telescopes are widely used in space debris size information detection and celestial body detection work. For the problem of limited space inside the optical system of large aperture telescopes, a space telescope mounting method based on the intrinsic coefficient sensitivity matrix is proposed by combining the wavefront detection technology. Compared with the traditional sensitivity matrix method, the method in this paper does not need to partition the detector and simplifies the construction of the wavefront reconstruction matrix. Characterisation of the system wave aberration is realised by using the eigenfactors, and the sensitivity matrix model is established according to the amount of misalignment. The experimental tests are carried out on the telescope with a diameter of 1.2 m, and the results show that the root mean square (RMS) values of the wavefront aberration in the centre field of view are less than λ/16 under the cases of eccentricity misalignment of the sub-mirror and tilting misalignment with the phase-aberration correction, which is of good value for the mounting of space telescope optical systems.

1 December 2020 in Optical Engineering
Verified
Journal Article
Closed access
PDF file
KLKun Li
Kun Li
HDHongchang Ding
Hongchang Ding
GCGuohua Cao
Guohua Cao
HHHan Hou
Han Hou
CZChangfu Zhao
Changfu Zhao
<!-- *** Custom HTML *** --> A high-precision error measurement method of angular displacements based on the biaxial of the reciprocal roll angles (RRA) is presented. The resolution and precision of the angular displacement measurement systems are guaranteed using the principle of small-angle measurements, along with a photoelectric autocollimator and reflector. Based on the method of the biaxial RRA and the principle of full-circle closure, a displacement measurement system covering the full circumferential range is built. The displacement measurement system can recognize the reference angle error elimination, the calibration angle error, and mutual compensation. The total error model of the angular displacement error measurement and the biaxial turntable is established, and the main error terms are analyzed using the total error model of the turntable and the components. The traditional “Fourier harmonic analysis” and sparse decomposition methods are used to correct the system error components. The simulation accuracy of the corrected turntable is similar to that of the error-free term, and the analysis results are used in the system-optimized configuration, including precision distribution. The experiment verifies the feasibility and effectiveness of the proposed high precision, angular displacement, and error measurement method.

1 February 2021 in Journal of Physics: Conference Series
Verified
Conference Paper
Open access
PDF file
HHHan Hou
Han Hou
GCGuohua Cao
Guohua Cao
HDHongchang Ding
Hongchang Ding
CZChangfu Zhao
Changfu Zhao
AWAijia Wang
Aijia Wang
After the encoder completes the installation and adjustment work, its accuracy needs to be checked again to confirm whether it meets the acceptance conditions. This process is usually manually operated by inspectors, and the inspection efficiency is low and there are certain manual errors. In order to improve this situation, an encoder automatic precision inspection system based on PID algorithm is designed. In this article, the working principle and structure of the detection platform are introduced in the first part, and then designs the corresponding detection software and operation interface according to its working characteristics. Finally, the platform was tested in combination with the actual detection products, and the encoder signal acquisition results were given, which further verified the accuracy and reliability of the detection device. The results showed that the accuracy detection platform can accurately and conveniently realize the error detection of the encoder’s function, and to a certain extent overcome the detection error caused by the drift of the photoelectric autocollimator during the detection process.