Daniel Juncu

Dr. Daniel Juncu

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 July 2020 in Remote Sensing
Verified
Journal Article
Open access
PDF file
MLMilan Lazecky
Milan Lazecky
KSKarsten Spaans
Karsten Spaans
PGPablo J Gonzalez
Pablo J Gonzalez
YMYasser Maghsoudi
Yasser Maghsoudi
YMYu Morishita
Yu Morishita
TWTim Wright
Tim Wright
Space-borne Synthetic Aperture Radar (SAR) Interferometry (InSAR) is now a key geophysical tool for surface deformation studies. The European Commission’s Sentinel-1 Constellation began acquiring data systematically in late 2014. The data, which are free and open access, have global coverage at moderate resolution with a 6 or 12-day revisit, enabling researchers to investigate large-scale surface deformation systematically through time. However, full exploitation of the potential of Sentinel-1 requires specific processing approaches as well as the efficient use of modern computing and data storage facilities. Here we present Looking Into Continents from Space with Synthetic Aperture Radar (LiCSAR), an operational system built for large-scale interferometric processing of Sentinel-1 data. LiCSAR is designed to automatically produce geocoded wrapped and unwrapped interferograms and coherence estimates, for large regions, at 0.001° resolution (WGS-84 coordinate system). The products are continuously updated at a frequency depending on prioritised regions (monthly, weekly or live update strategy). The products are open and freely accessible and downloadable through an online portal. We describe the algorithms, processing, and storage solutions implemented in LiCSAR, and show several case studies that use LiCSAR products to measure tectonic and volcanic deformation. We aim to accelerate the uptake of InSAR data by researchers as well as non-expert users by mass producing interferograms and derived products.

1 February 2020 in Journal of Volcanology and Geothermal Research
Verified
Journal Article
Open access
DJDaniel Juncu
Daniel Juncu
TÁTh. Árnadóttir
Th. Árnadóttir
HGH. Geirsson
H. Geirsson
GGG.B. Guðmundsson
G.B. Guðmundsson
BLB. Lund
B. Lund
KMK. Michalczewska
K. Michalczewska

28 January 2017 in Journal of Geophysical Research: Solid Earth
Verified
Journal Article
Closed access
PDF file
DJDaniel Juncu
Daniel Juncu
TÁTh. Árnadóttir
Th. Árnadóttir
AHAndrew Hooper
Andrew Hooper
GGG. Gunnarsson
G. Gunnarsson

9 January 2019 in Geophysical Journal International
Verified
Journal Article
Open access
PDF file
DJDaniel Juncu
Daniel Juncu
TÁTh Árnadóttir
Th Árnadóttir
HGH Geirsson
H Geirsson
GGG Gunnarsson
G Gunnarsson
A geothermal reservoir deforms when the extraction of pore fluid exceeds reservoir recharge, causing a decrease in pore pressure. The magnitude of this deformation is related to the amount of pore fluid that is extracted. Assuming compressible material properties in a homogeneous reservoir, we derive an expression for the ratio of reservoir volume change per extracted fluid mass. We show that this ratio depends on a number of parameters, notably the compressibilities of reservoir rock and pore fluid. We apply the obtained relationship to three different geothermal areas (Hellisheidi, Reykjanes and The Geysers) to illustrate under which circumstances the relation between reservoir deformation and the amount of extracted fluid is able to help us learn more about reservoir conditions. We find that fluid compressibility, depending on whether the system is single-phase or two-phase, may explain large differences in estimates of reservoir volume changes per mass of extracted fluid.

24 November 2022 in Geoscientific Instrumentation, Methods and Data Systems
Verified
Journal Article
Open access
PDF file
DJDaniel Juncu
Daniel Juncu
XCXavier Ceamanos
Xavier Ceamanos
Isabel TrigoIsabel Trigo
Isabel Trigo
SGSandra Gomes
Sandra Gomes
SFSandra C. Freitas
Sandra C. Freitas
MDAL is the operational Meteosat Second Generation (MSG)-derived daily surface albedo product that has been generated and disseminated in near real time by EUMETSAT Satellite Application Facility for Land Surface Analysis (LSA-SAF) since 2005. We propose and evaluate an update to the MDAL retrieval algorithm which introduces the accounting for aerosol effects as well as other scientific developments: pre-processing recalibration of radiances acquired by the SEVIRI instrument aboard MSG and improved coefficients for atmospheric correction as well as for albedo conversion from narrow- to broadband. We compare the performance of MDAL broadband albedos pre- and post-upgrade with respect to three types of reference data: the EPS Ten-Day Albedo product ETAL is used as the primary reference, while albedo derived from in situ flux measurements acquired by ground stations and MODIS MCD43D albedo data are used to complete the validation. For the comparison to ETAL – conducted over the whole coverage area of SEVIRI – we see a reduction in average white-sky albedo mean bias error (MBE) from −0.02 to negligible levels (<0.001) and a reduction in average mean absolute error (MAE) from 0.034 to 0.026 (−24 %). Improvements can be seen for black-sky albedo as well, albeit less pronounced (14 % reduction in MAE). Further analysis distinguishing individual seasons, regions and land covers show that performance changes have spatial and temporal dependence: for white-sky albedo we see improvements over almost all regions and seasons relative to ETAL, except for Eurasia in winter; resolved by land cover we see a similar effect with improvements for all types for all seasons except winter, where some types exhibit slightly worse results (crop-, grass- and shrublands). For black-sky albedo we similarly see improvements for all seasons when averaged over the full data set, although sub-regions exhibit clear seasonal dependence: the performance of the upgraded MDAL version is generally diminished in local winter but better in local summer. The comparison with in situ observations is less conclusive due to the well-known problem of the spatial representativeness of near-ground observations with respect to satellite pixel footprint sizes. Comparison with MODIS at the same locations shows mixed results in terms of change in performance following the proposed upgrade but proves the good quality of the MDAL products in general. Based on the evidence presented in this study, we consider the updated algorithm version to be able to deliver a valuable improvement of the operational MDAL product. This improvement is two-fold: primarily, there is the refinement of the albedo values themselves; secondarily, the increased alignment with the ETAL product is beneficial for those who wish to exploit synergies between EUMETSAT's geostationary and polar satellites to generate data sets based on the LSA-SAF albedo products from the two different missions.

24 September 2025 in Atmospheric Measurement Techniques
Verified
Journal Article
Open access
PDF file
AGAdèle Georgeot
Adèle Georgeot
XCXavier Ceamanos
Xavier Ceamanos
JAJean-Luc Attié
Jean-Luc Attié
DJDaniel Juncu
Daniel Juncu
JGJosef Gasteiger
Josef Gasteiger
MCMathieu Compiègne
Mathieu Compiègne
Aerosols have significant effects on Earth, which vary according to the type of these atmospheric particles. Different observing systems exist today to monitor aerosols, mainly through the retrieval of aerosol optical depth (AOD), among which meteorological satellites in geostationary orbit provide unique information thanks to their acquisition of several Earth's images per hour. The third generation of European geostationary satellites, Meteosat Third Generation-Imager with the onboard Flexible Combined Imager (FCI) operational since December 2024, brings new possibilities for aerosol remote sensing compared to its predecessor, Meteosat Second Generation, with the Spinning Enhanced Visible and Infrared Imager (SEVIRI) on board. This article assesses the improvements in aerosol characterization that will be made possible thanks to FCI, based on realistically generated synthetic data that are processed by optimal estimation methods to quantify aerosol information content and to retrieve relevant aerosol properties. Two case studies corresponding to challenging aerosol retrieval situations are simulated, a dust outbreak in North Africa and the wildfire season in South West Africa. First, synthetic data are used to study the potential for AOD retrieval of new FCI spectral channels in comparison to SEVIRI's. Results prove that channel VIS04 (centered at 444 nm) is the best suited for this task, with a significant decrease in retrieval error (root square mean error by 23 % and mean bias error by 65 %) in comparison to AOD estimated from the SEVIRI-heritage channel VIS06 (centered at 640 nm). Second, the FCI capabilities to further characterize aerosol particles are investigated, with the joint retrieval of AOD and fine mode fraction (FMF), which is linked to particle size distribution and therefore aerosol type. This is achieved by exploiting near-infrared channel NIR22 (centered at 2250 nm, and found to be sensitive to coarse particles only in the first part of the study) in addition to channel VIS04. Experiments show that, except under certain unfavorable conditions, the joint retrieval of AOD and FMF is possible, even if fast but less accurate radiative transfer models are used, which could be employed in an operational setting. This article demonstrates the possibility of obtaining advanced high temporal frequency aerosol observations from FCI and opens pathways for the future study of aerosol diurnal variations from space.