As one of the widespread physical phenomena in the global ocean system, the ocean front has a very important influence on underwater sound propagation. Firstly, this paper systematically reviews several methods for the detection of ocean fronts in the past decades, including traditional oceanographic methods, artificial intelligence methods, and acoustic methods, highlighting the advantages and disadvantages of each method. Next, some modeling studies of ocean fronts are reported in this paper. Based on the above research, we pay more attention to research progress on the acoustic effects of ocean fronts, including simulation analysis and experimental research, which has also been the focus of underwater acousticians for a long time. In addition, this paper looks forward to the future development direction of this field, which can provide good guidance for the study of ocean fronts and their acoustic effects in the future.

The 3 × 3 demodulation algorithm has been widely used in retrieving the phase information in the optical fiber sensing system, while the asymmetry of the 3 × 3 coupler can introduce some distortions. In this situation, the parameters of the 3 × 3 coupler can be calibrated by the ellipse fitting method to remove the distortions. Conducting a frequency modulation on the laser, together with an unbalanced Michelson interferometer, makes the ellipse fitting method implemented, which is more appropriate for all-optical sensing. Unexpectedly, the auxiliary amplitude modulation of the laser induced by the frequency modulation is inevitable, leading to the deterioration of the calibration. In this paper, the influence of the auxiliary amplitude modulation on the calibration of the asymmetric parameters is analyzed theoretically and verified experimentally, on the basis of which a convenient but highly efficient method for acquiring the output of the laser and removing related items from the interferometric signals is put forward. The feasibility and robustness of the proposed solution is tested experimentally, and the results show that the mean square errors of the fittings and the variation coefficients of the calibrated parameter sequences are at the scale of ${10}^{-5}$ and ${10}^{-4}$, respectively, indicating that the method performs very well.

In this paper, we propose a data fusion algorithm based on the weighted histogram statistics (DF-WHS) to improve the performance of direction-of-arrival (DOA) estimation for the vector hydrophone vertical array (VHVA). The processing frequency band is firstly divided into multiple sub-bands, and the high-resolution multiple signal classification (MUSIC) algorithm is applied to estimate the azimuth of each sub-band for each vector hydrophone. Then, the weighted least square (WLS) data fusion technique is used to fuse the sub-band estimation results of multiple sensors. Finally, the weighted histogram statistics method is employed to obtain the synthesis results in the frequency domain. We carried out a simulation and sea trial of the 16-element VHVA to evaluate the performance of the proposed algorithm. Compared to several traditional processing algorithms, the beam width of the proposed approach is significantly narrower, the side lobes are considerably lower, and the mean square error (MSE) is effectively smaller. In addition, the DF-WHS method is more suitable to accurately estimate the target azimuth with a low signal-to-noise ratio (SNR) because the noise sub-band is suppressed in the weighted histogram statistics step. The DF-WHS method in this article provides a new approach to improve the performance of deep-sea target detection for the VHVA.

This paper proposes an underwater broadband target depth estimation method based on the multipath arrival structure in medium and short-range deep-sea environments. The proposed approach involves separating the multipath rays arriving at the vertical line array using the matched filtering technique. The combined beamforming is then applied to the vector hydrophone vertical array (VHVA) to obtain more accurate elevation angle estimates. The components of the interference sound field at different distances are judged, and the signal received by the array is compensated using suitable estimated angles. Finally, the multipath time delay difference is extracted from the pulse peaks of the compensated signal, and the target depth is estimated by establishing the relationship among the multipath time delay difference, the elevation angle and depth. Simulations and experiments demonstrate the effectiveness of this method in reducing the depth estimation bias and avoiding the misjudgment of surface or submerged targets.

The two-stage suspension system (TSSS) is designed for the fiber optic vector hydrophone (FOVH) to isolate the vibration from the mooring rope. The acceleration transmissibility of the TSSS is studied theoretically and experimentally. The results show that the TSSS has a major advantage over the traditional one-stage suspension system (OSSS). Typically, the vibration isolation of the TSSS is demonstrated to be over 25 dB higher than that of the OSSS at 100 Hz. Meanwhile, it is demonstrated that the TSSS has little negative influence on the in-band acceleration response of the FOVH. The TSSS has the prospect of reducing the mechanical noise of the FOVH, which is conducive to suppressing the self-noise and enhancing the ability of weak signal detection.