Fiber-optic hydrophone (FOH) is a significant type of acoustic sensor, which can be used in both military and civilian fields such as underwater target detection, oil and natural gas prospecting, and earthquake inspection. The recent progress of FOH is introduced from five aspects, including large-scale FOH array, very-low-frequency detection, fiber-optic vector hydrophone (FOVH), towed linear array, and deep-sea and long-haul transmission. The above five aspects indicate the future development trends in the FOH research field, and they also provide a guideline for the practical applications of FOH as well as its array.

Quasi-random nanostructures are playing an increasingly important role in developing advanced material systems with various functionalities. Current development of functional quasi-random nanostructured material systems (NMSs) mainly follows a sequential strategy without considering the fabrication conditions in nanostructure optimization, which limits the feasibility of the optimized design for large-scale, parallel nanomanufacturing using bottom-up processes. We propose a novel design methodology for designing isotropic quasi-random NMSs that employs spectral density function (SDF) to concurrently optimize the nanostructure and design the corresponding nanomanufacturing conditions of a bottom-up process. Alternative to the well-known correlation functions for characterizing the structural correlation of NMSs, the SDF provides a convenient and informative design representation that maps processing–structure relation to enable fast explorations of optimal fabricable nanostructures and to exploit the stochastic nature of manufacturing processes. In this paper, we first introduce the SDF as a nondeterministic design representation for quasi-random NMSs, as an alternative to the two-point correlation function. Efficient reconstruction methods for quasi-random NMSs are developed for handling different morphologies, such as the channel-type and particle-type, in simulation-based microstructural design. The SDF-based computational design methodology is illustrated by the optimization of quasi-random light-trapping nanostructures in thin-film solar cells for both channel-type and particle-type NMSs. Finally, the concurrent design strategy is employed to optimize the quasi-random light-trapping structure manufactured via scalable wrinkle nanolithography process.

The noise floor is a vital specification that determines the minimum detectable signal in the phase measurement. However, the noise floor in optical phase measurement conducted via conventional optical interferometry tends to approach the intrinsic limit. In this study, a low noise phase measurement of a fiber optic sensor conducted via weak value amplification is experimentally demonstrated. The system has a flat, wideband frequency response from 0.1 Hz to 10 kHz, as well as adequate linearity. The operating band is wider than the present sensor using the same mechanism. In particular, the system noise floor is measured to be -98 dB at 1 Hz and -155 dB at 1 kHz. The results indicate that the minimum detectable signal can reach as low as 5.6 × 10⁻⁶ rad at 1 Hz and 8 × 10⁻⁹ rad at 1 kHz. In addition, it is demonstrated that the noise result of the proposed system is two-order of magnitude lower than that of the typical interferometric fiber optic sensors through the comparison experiment. With the characteristic of low-noise, the system is promising in the field of weak signal detection such as underwater acoustic signal detection, seismic wave detection, and mineral resource exploration.

We demonstrate an ultranarrow-linewidth Brillouin/erbium fiber laser (BEFL), in which 45-cm commercialized erbium-doped fiber (EDF) acts as both the Brillouin and linear gain media. The Brillouin pump threshold of the BEFL is in submilliwatts. Its 980-nm pump threshold is only 15 mW. The BEFL presents an ultranarrow linewidth of 40 Hz. This single-frequency BEFL presents a number of applications in many high-coherence fields.

The phase-generated-carrier (PGC) method is one of the popular interrogation methods for the interferometric fiber-optic sensor systems. Among varieties of specifications, the noise characteristic is a key one that determines the minimum detectable signal. However, the mechanism of the noise transfer process in the PGC-based interferometric fiber-optic sensor has not been reported to the best knowledge. In this paper, the influences of three different types of noise sources on the noise floor of the PGC-based interferometric fiber-optic sensor system are studied systematically. On the basis of that, the phase noise transfer model is built and verified experimentally. The results depict that the theoretical model can well predict the experimental result. With the proposed theoretical model, the prediction and analysis of the output phase noise in the PGC-based interferometric fiber-optic sensor is available. In addition, the proposed model provides a potential support for locking the initial phases to suppress the common-mode noise in the PGC-based system. In this sense, the proposed model is a significant tool for the noise-target design and construction of the PGC-based in terferometric fiber-optic sensor system.