Flexible and stretchable strain sensors are expected to significantly contribute to new technologies and be applied in various applications, including human interfaces, smart clothes, and robotic skin. Hence, we have proposed a flexible film-shaped strain sensor that is composed of three elastomer films and two carbon-nanotube electrodes. It is thin, lightweight, and has low elasticity. Strain measurements taken by the sensor are based on changes in capacitance, which is proportional to the square of the area of the sensor's sensing part. Consequently, the capacitance of the strain sensor does not show the direction of the strain. As some applications require the measurement of strain in a fixed direction, this paper proposes an anisotropic strain sensor. This anisotropic strain sensor decreases the effect of the strain in the fixed direction to less than 10%. The model of the anisotropic strain sensor and experimental results show that its capacitance is proportional to the square of the length of the sensing part in the stretch direction. To check the anisotropic strain sensor's practicality, it is applied to estimate the angle of a wrist joint. The results show that the anisotropy decreases the root-mean-square error of the estimated angle to less than 3°.
Conventional strain sensors measure strains exerted on solid metals and have been widely applied. Stretch measurements of flexible objects require strain sensors with wide dynamic range (stretch exceeding 100%) that can also measure areal changes. Flexible strain sensors are expected to realize a wide range of technologies, such as human interfaces, smart clothes, skin-motion monitoring, and robotic skin. Recently, carbon nanotubes (CNTs) have been assembled into stretchable conductors, and are potential base materials for various flexible sensors. Herein, we construct a flexible stretching sensor from urethane elastomer and conductive electrodes from singlewalled CNTs. This sensor is extremely thin (thickness: 150 μm), and characterized by high elasticity (up to 100%), low stress (0.8 MPa at 100%), durability (1000 cycles at 50%), light weight (approx. 1.1 g/cm3), and sensitivity (1 pF/mm2). The strain sensor is tested on a cloth fabric, and is confirmed to measure the stretch area of flexible materials.
18 June 2018 in Journal of Ambient Intelligence and Humanized Computing
Low-back pain is a common affliction. Epidemiological analyses have reported that periodic cycles of lumbar flexion and rotation are major risk factors for low-back pain. To prevent low-back pain, a lumbar-motion monitoring device could help diagnosticians assess patients’ risk for low-back pain. This study proposes such a device that uses lightweight stretchable strain sensors. Six of these strain sensors form a parallel-sensor mechanism that measures rotation angles of lumbar motion in three axes. The parallel-sensor mechanism calculates rotation angles from the lengths of the strain sensors iteratively. Experimental results reveal that the prototype device is effective for lumbar-motion measurement and significantly improves in terms of wearability over comparable devices.
Food texture is one of the important quality indicators in foodstuffs, along with appearance and flavor, contributing to taste and odor. This study proposes a novel magnetic food texture sensor that corresponds to the tactile sensory capacity of the human tooth. The sensor primarily consists of a probe, linear slider, spring, and circuit board. The probe has a cylindrical shape and includes a permanent magnet. Both sides of the spring are fixed to the probe and circuit board. The linear slider enables the smooth, single-axis motion of the probe during food compression. Two magnetoresistive elements and one inductor on the circuit board measured the probe’s motion. A measurement system then translates the measurement data collected by the magnetoresistive elements into compression force by means of a calibration equation. Fundamental experiments were performed to evaluate the range, resolution, repetitive durability of force, and differences in the frequency responses. Furthermore, the sensor was used to measure seven types of chicken nuggets with different coatings. The difference between the force and vibration measurement data is revealed on the basis of the discrimination rate of the nuggets.
Crispness contributes to the pleasantness and enjoyment of eating foods and is popular with people of wide ages in many countries. Hence, a quantitative evaluation method for crispness is required for food companies developing new food products. In this study, the effects of different sensory combinations on crispness were investigated through sensory evaluation, and a Gaussian process regression model was used to predict the evaluation values of crispness. First, four crispness descriptors in Japanese were selected, and sensory evaluations were conducted with ten participants using commercially available snack foods under three different sensory combinations of force, vibration, and sound to confirm the effects of the three senses. An instrumental system also measured force, vibration, and sound for snack foods under the same conditions. The Gaussian process regression model determined the relationship between the sensory and measurement data and predicted the sensory evaluation values from the measurement data. Cross-validation verified that the Gaussian process regression model accurately predicted the food texture evaluation values from the measurement data even in conditions with different sensory components.