Food texture is one of the important quality indicators in foodstuffs, along with appearance and flavor, contributing to taste and odor. This study proposes a novel magnetic food texture sensor that corresponds to the tactile sensory capacity of the human tooth. The sensor primarily consists of a probe, linear slider, spring, and circuit board. The probe has a cylindrical shape and includes a permanent magnet. Both sides of the spring are fixed to the probe and circuit board. The linear slider enables the smooth, single-axis motion of the probe during food compression. Two magnetoresistive elements and one inductor on the circuit board measured the probe’s motion. A measurement system then translates the measurement data collected by the magnetoresistive elements into compression force by means of a calibration equation. Fundamental experiments were performed to evaluate the range, resolution, repetitive durability of force, and differences in the frequency responses. Furthermore, the sensor was used to measure seven types of chicken nuggets with different coatings. The difference between the force and vibration measurement data is revealed on the basis of the discrimination rate of the nuggets.
1 February 2012 in International Journal of Applied Electromagnetics and Mechanics
A humanoid robot hand receives much attention in various fields. We have developed the universal robot hand with the multi-axis force/torque sensors. In order to manipulate an object by the robot hand without dropping the object, it is important to detect a slip between the object and the robot finger. Therefore, we propose a slip detection method with the multi-axis force/torque sensor and an anti-slip control method based on the slip detection. The effectiveness of the proposed slip detection and the anti-slip control is verified through some experiments with the universal robot hand.
Aspiration pneumonia is a serious condition in the elderly. To strengthen the muscles required for swallowing, patients can train using the Mendelsohn maneuver, wherein they maintain their larynx at the top of the laryngeal elevation during swallowing. This study describes a wearable device to detect the onset and offset times of the laryngeal elevation for a biofeedback system to support this training. The biofeedback system consists of a band-shaped device with stretchable strain sensors. The strain sensors measure the change of circumferential length of the neck. An algorithm detects the onset and offset times of the laryngeal elevation based on the absolute first-order difference of the measured data and distance between the measured data and template data by pattern matching. The algorithm detected the onset and offset times of 53 out of 54 data sets from elderly participants. Cluster analysis separated the data into two groups. For both groups, the mean absolute error of the interval time was within 1 s when compared with the time recorded by a speech-language-hearing therapist. We believe that this biofeedback system for the Mendelsohn maneuver tolerates the 1 s delay. The wearable device is soft, lightweight, and easy for a patient to use alone. The efficacy of the device for the strengthening of muscles must be verified in a clinical study.
1 August 2016 in International Journal of Applied Electromagnetics and Mechanics
The multi-fingered robot hand has much attention in various fields. Many robot hands have been proposed so far. A teleoperation system for the hand/arm robot allows intuitive manipulation of the hand/arm robot. This paper deals with a motion capture system for controlling the hand/arm robot remotely. Here, we use vision and inertial sensors simultaneously in order to detect the position and the posture of an operator's arm and hand.
1 January 2003 in Transactions of the Institute of Systems, Control and Information Engineers