Rising sea levels are causing more frequent flooding events in coastal areas and generate many issues for coastal communities such as loss of property or damages to infrastructures. To address this issue, this paper reviews measures currently in place and identifies possible control measures that can be implemented to aid preservation of coastlines in the future. Breakwaters present a unique opportunity to proactively address the impact of coastal flooding. However, there is currently a lack of research into combined hard and soft engineering techniques. To address the global need for developing sustainable solutions, three specific breakwater configurations were designed and experimentally compared in the hydraulic laboratory at Coventry University to assess their performance in reducing overtopping and the impact of waves, quantifying the effectiveness of each. The investigation confirmed that stepped configurations work effectively in high amplitudes waves, especially with the presence of a slope angle to aid wave reflection. These results provide a very valuable preliminary investigation into novel sustainable solutions incorporating both artificial and natural based strategies that could be considered by local and national authorities for the planning of future mitigation strategies to defend coastal areas from flooding and erosion.
Transverse solute mixing across a vegetation generated horizontal shear layer was quantified using laser induced fluorometry techniques for artificial and real vegetation. A two-dimensional finite difference model (FDM) was developed to describe transverse concentration profiles for flows containing transverse variations in velocity and transverse dispersion, from a steady solute input. The FDM was employed inversely, to optimize the parameters describing the transverse distribution of the transverse dispersion coefficient for vegetation generated shear layers. When laboratory data are available, continuous function descriptions produce slightly improved FDM modelled solute concentration profiles compared with simplified step discontinuity velocity and dispersion inputs. When laboratory data are not available, estimates of step or continuous transverse distributions from other work enable concentration profiles to be predicted with a similar goodness of fit. This paper presents a validated, simple, robust finite difference model to describe the mixing of solutes in a channel containing marginal vegetation.
Beavers have influenced the world’s ecosystem for millions of years. Their dams create ponds and wetlands that provide a large range of hydraulic and ecological benefits to the natural world, including mitigation against flooding and improving water quality. As beavers are now being reintroduced to many parts of the world, it is important to fully understand the impact of their dams on the flow characteristics of the water-courses on which they are built. This paper investigates the relationship between the physical properties of a model beaver dam and its fundamental hydraulics and pollutant dispersion characteristics. The first objective of this paper was to develop a modelling framework to relate discharge to flow-depth for dams with a combination of porous and impermeable sections. The second objective was to utilize a similar framework to predict the down-stream concentration distribution of an up-stream pollution event passing through such systems. The ability to model these parameters for dams with variable lengths of porous and impermeable sections is important as the porosity of beaver dams can vary with depth, depending on which sections are constructed from branches, rocks, or compacted mud. The analysis and modelling developed in this paper show that a single, general relationship can be obtained between discharge and flow-depth regardless of the presence of sections that are both porous or impermeable, provided the relative depths of these sections are known and accounted for. It is also shown that the Nominal Residence Time and the Advection Dispersion Equation can be used to predict pollutant transport in such systems. These two equations have previously been shown to have limitations when applied to some complex systems, so demonstrating they can be applied to a porous dam with combinations of porous and impermeable sections at the relative discharges investigated is noteworthy.