Removal of Reactive Black 5 (RB5) dye from an aqueous solution was studied by its adsorption on banana peel biochars (BPBs). The factors affecting RB5 dye adsorption such as pH, exposure time, RB5 dye concentration, adsorbent dose, particle size and temperature were investigated. Maximum 97% RB5 dye removal was obtained at pH 3 with 75 mg/L adsorbate concentration by banana peel biochars. Fourier transform infrared (FTIR) and scanning electron microscopy (SEM) were used to characterize the adsorbent material. The data of equilibrium were analyzed by Langmuir and Freundlich isotherm models. The experimental results were best reflected by Langmuir isotherm with maximum 7.58 mg/g adsorption capacity. Kinetic parameters were explored and pseudo-second order was found suitable which reflected that rate of adsorption was controlled by physisorption. Thermodynamic variables exhibited that the sorption process was feasible, spontaneous, and exothermic in nature. Banana peel biochar showed excellent regeneration efficiency up to five cycles of successive adsorption-desorption. Banana peel biochar maintained >38% sorption potential of RB5 dye even after five cycles of adsorption-desorption. The phytotoxic study exhibited the benign nature of BPB-treated RB5 dye on tomato seeds.
Recently, the preparation of smart multifunctional hybrid nanoparticles has captured significant interest in versatile areas, including medicine, environment, and food, due to their enhanced physicochemical properties. The present study focuses on the synthesis of Fe-doped NiO nanoparticles by the coprecipitation method using the sources of nickel (II) acetate tetrahydrate and iron (III) nitrate nonahydrate. The prepared Fe-doped NiO nanoparticles are characterized by X-ray diffraction, Fourier transform infrared spectroscopy, UV–visible spectroscopy, field-emission scanning electron microscopy, transmission electron microscopy, and X-ray photon spectroscopic analysis. The XRD results clearly confirm the face-centered cubic structure and polycrystalline nature of the synthesized Fe-NiO nanoparticles. The Tauc plot analysis revealed that the bandgap energy of the Fe-doped NiO nanoparticles decreased with the increasing concentration of the Fe dopant from 2% to 8%. The XPS analysis of the samples exhibited the existence of elements, including Fe, Ni, and O, with the absence of any surplus compounds. The FE-SEM and TEM analyses proved the formation of nanostructured Fe-NiO with few spherical and mostly unevenly shaped particles. Further, the photocatalytic efficiency of the prepared Fe-doped NiO nanoparticles were identified by using the cationic dye rhodamine B (Rh-B). The photocatalytic results proved the 8% of Fe doped with NiO nanoparticles achieved 99% of Rh-B degradation within 40 min of visible-light irradiation. Hence, the results of the present study exemplified the Fe-doped NiO nanoparticles have acted as a noticeable photocatalyst to degrade the Rh-B dye.
Herein, commercially available Dowex 5WX8, a cation exchange polymeric resin, was modified through solvent impregnation with t-butyl phosphate (TBP) to produce a solvent impregnated resin (SIR), which was tested for the removal of rhodamine B (RhB) from water in batch adsorption experiments. The effect of SIR dosage, contact time, and pH on RhB adsorption was studied and optimized by response surface methodology (RSM), interaction, Pareto, and surface plots. Scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) were respectively used for characterizing SIR surface morphology and identifying active binding sites before and after RhB adsorption. SEM showed that the pristine SIR surface was covered with irregular size and shape spots with some pores, while RhB saturated SIR surface was non-porous. FTIR revealed the involvement of electrostatic and π–π interactions during RhB adsorption on SIR. Dosage of SIR, contact time, and their interaction significantly affected RhB adsorption on SIR, while pH and its interaction with dosage and contact time did not. The optimum identified experimental conditions were 0.16 g of SIR dose and 27.66 min of contact time, which allowed for 98.45% color removal. Moreover, RhB adsorption equilibrium results fitted the Langmuir isotherm with a maximum monolayer capacity (qmax) of 43.47 mg/g.
Agglomeration and restacking can reduce graphene oxide (GO) activity in a wide range of applications. Herein, GO was synthesized by a modified Hummer’s method. To minimize restacking and agglomeration, in situ chemical oxidation polymerization was carried out to embed polyaniline (PANI) chains at the edges of GO sheets, to obtain GO-PANI nanocomposite. The GO-PANI was tested for the adsorptive removal of brilliant green (BG) from an aqueous solution through batch mode studies. Infrared (FT-IR) analysis revealed the dominance of hydroxyl and carboxylic functionalities over the GO-PANI surface. Solution pH-dependent BG uptake was observed, with maximum adsorption at pH 7, and attaining equilibrium in 30 min. The adsorption of BG onto GO-PANI was fit to the Langmuir isotherm, and pseudo-second-order kinetic models, with a maximum monolayer adsorption capacity (qm) of 142.8 mg/g. An endothermic adsorption process was observed. Mechanistically, π-π stacking interaction and electrostatic interaction played a critical role during BG adsorption on GO-PANI.
Activated carbon doping TiO2 nanoparticles were synthesised by zapota leaf extract using the co-precipitation method. The bio-constituents of plant compounds were used in the reactions of stabilization and reductions. The carbon loading on the TiO2 nanoparticles was characterised by XRD, FTIR, UV-DRS, SEM with EDX, and TEM analysis. The loading of activated carbon onto the TiO2 nanoparticles decreased the crystallite size and optical bandgap, and their doping improved the surface structure of AC/TiO2 nanoparticles. Mesoporous/microporous instability was remodified from the activated carbon, which was visualised using SEM and TEM analysis, respectively. The photocatalytic dye degradation of Rh-B dye was degraded in TiO2 and AC/TiO2 nanoparticles under visible light irradiation. The degradation efficiencies of TiO2 and AC/TiO2 nanoparticles were 73% and 91%, respectively. The bacterial abilities of TiO2 and AC/TiO2 nanoparticles were examined by E. coli and S. aureus. The water reclamation efficiency and bactericidal effect of TiO2 and AC/TiO2 nanoparticles were examined via catalytic dye degradation and bacterial efficiency of activated carbon-doped titanium dioxide nanoparticles.
This review critically discussed recent developments in hydrothermal carbonization (HTC) of food waste and its valorization to solid fuel. Food waste properties and fundamentals of the HTC reactor were also covered. The review further discussed the effect of temperature, contact time, pressure, water–biomass ratio, and heating rate on the HTC of food waste on the physiochemical properties of hydrochar. Literature review of the properties of the hydrochar produced from food waste in different studies shows that it possesses elemental, proximate, and energy properties that are comparable to sub-bituminous coal and may be used directly as fuel or co-combusted with coal. This work conclusively identified the existing research gaps and provided recommendation for future investigations.