In this study, a new multi-use offshore tension leg platform (TLP) was designed for wave energy production through an embedded wave energy converter (EWEC) system. The proposed EWEC system consists of four built-in tuned liquid column dampers for absorbing the hull motion energy and eight Wells turbines as the power take-off devices. A multifold nonlinear analytical model of this multibody system was developed considering the hydrodynamics of the TLP-EWEC system during large motions and the aerohydrodynamics of the chamber-turbine groups. A comprehensive assessment, including an evaluation of motion responses and preliminary generating capacity, was performed for different wave-load directions using the numerical time integration method. The results indicated that the multi-use platform can generate a considerable amount of turbine power for the offshore platform energy mix as well as serve for offshore oil and gas production in the target oil fields. Such additional benefits and profitability were proven effective and worthy for further exploration and practical application.
Semisubmersible floating structures are becoming the predominant understructure type for floating offshore wind turbines (FOWTs) worldwide. As FOWTs are erected far away from land and in deep seas, they inevitably suffer violent and complicated sea conditions, including extreme waves and winds. Mooring lines are the representative flexible members of the whole structure and are likely to incur damage due to years of impact, corrosion, or fatigue. To improve mooring redundancy at each azimuth angle around a wind turbine, a group of mooring lines are configured in the same direction instead of just one mooring line. This study focuses on the mooring failure problems that would probably occur in a realistic redundant mooring system of a semisubmersible FOWT, and the worst residual mooring layout is considered. An FOWT numerical model with a 3 × 3 mooring system is established in terms of 3D potential flow and BEM (blade element momentum) theories, and aero-hydro floating-body mooring coupled analyses are performed to discuss the subsequent time histories of dynamic responses after different types of mooring failure. As under extreme failure conditions, the final horizontal offsets of the structure and the layout of the residual mooring system are evaluated under still water, design, and extreme environmental conditions. The results show that the transient tension in up-wave mooring lines can reach more than 12,000 kN under extreme environmental conditions, inducing further failure of the whole chain group. Then, a deflection angle of 60° may occur on the residual laid chain, which may bring about dangerous anchor dragging.
The poor maneuverability inherent to large ships is a non-negligible problem that restricts the development of the shipping industry, as large ships can only cruise at an excessively conservative speed when they encounter complicated traffic conditions; nevertheless, ship collision accidents still occasionally occur. In the present study, the novel concept of spoiler fins for modern large ships is proposed. In order to assess their effectiveness in enhancing ship maneuverability, a KRISO container ship (KCS) was selected to carry a pair of spoiler fins, after which a simplified simulation approach for saving the calculation resource was designed for ship collision avoidance conditions, and a full-scale numerical model, including the ship hull, fin, and fluid field domain, was established. Transient-state hydrodynamic forces were calculated during collision avoidance maneuvers using the CFD method; the pressure and velocity contours around the ship were demonstrated; and the ship motion trajectories under different initial ship speeds were simulated and predicted through the adoption of overset mesh and 6-DOF dynamic mesh techniques. Eventually, the improved course-changing performance, dependent on the spoiler fins, was validated.
1 June 2026 in Journal of Physics: Conference Series
With the rapid growth of deep-water offshore wind power, Spar floating wind turbines have become a key foundation type due to their high stability, low motions, and deep-water adaptability. The mooring system, as the sole external constraint, strongly influences the platform’s dynamic response, especially under mooring failures. Spar FOWTs typically use a Delta mooring configuration to enhance yaw-restoring capacity, yet many studies neglect or simplify it, causing deviations in predicted post-failure responses. This study develops a fully coupled aero-hydro-servo-elastic-mooring dynamic model of a Spar FOWT with Delta mooring using the FAST-to-AQWA (F2A) real-time coupling framework. The model systematically investigates dynamic responses and secondary load redistribution following mooring branch failures under complex sea states. Results show marked differences between design and extreme conditions, while the Delta mooring provides sufficient redundancy and buffering to withstand transient loads. The findings offer critical references for safety assessment and reliability design of deep-water floating wind turbine mooring systems.