In this work, we present a detailed analysis of individual loss mechanisms in silicon nitride partial Euler bends at a wavelength of 850 nm. This structure optimizes the transmission through small radii optical waveguide bends. The partial Euler bend geometry balances losses arising from the transition from the straight to the bend waveguide mode and radiative losses of the bend waveguide mode. Numerical analyses are presented for 45-degree bends commonly employed in S-bend configurations to create lateral offsets, as well as 90- and 180-degree bends. Additionally, 90-degree partial Euler bends were fabricated on a silicon nitride photonic platform to experimentally complement the theoretical findings. The optimized waveguide bends allow for a reduced effective radius without increasing the total bend loss and, thus, enable a higher component density in photonic integrated circuits.
Artificial chiral-structural-color materials can carry high-dimensional information based on multiple optical degrees of freedom, providing possibilities for advanced optical security and information storage. However, current artificial chiral-structural-color materials are hindered by their specific compositions, fine nanostructures, and single polarization modulation. Here, we found that microdomes made from common polymers have chiral structural colors with broadband tunability and multiple polarization-modulated chirality. The microdome patterns are easily fabricated by ordinary printing techniques and have inhomogeneous spatial distributions of full polarization states and customizable colors. Our chiral-structural-color microdomes (CSCMs) provide a promising roadmap for high-capacity information encryption and high-security anti-counterfeiting. We developed multidimensional tunable structural color displays and achieved encryption with high information capacity. To further highlight the application potential, we constructed contact lenses integrated with CSCMs for identity authentication with 2 32 distinctive cryptograms.
One of the major barriers for a widespread commercial uptake of silicon nitride photonic integrated circuits for cost-sensitive applications is the lack of low-cost monolithically integrated laser light sources directly emitting into single-mode waveguides. In this work, we demonstrate an optically pumped organic solid-state slot-waveguide distributed feedback laser designed for a silicon nitride organic hybrid photonic platform. Pulsed optical excitation of the gain medium is achieved by a 450 nm laser diode. The optical feedback for lasing is based on a second-order laterally coupled Bragg grating with a slot-waveguide core. Optimized material gain properties of the organic dye together with the increased modal gain of the laser mode arising from the improved overlap of the slot-waveguide geometry with the gain material enable single-mode lasing at a wavelength of 600 nm. The straightforward integration and operation with a blue laser diode leads to a cost-effective coherent light source for photonic integrated devices.
The optimization of material gain in optically pumped dye-doped polymer thin films is an important task in the development of organic solid-state lasers. In this work, we present a theoretical model that accommodates the influence of concentration quenching on material gain and employ it to study the novel dye molecule 2-(4-(bis(4-(tert-butyl)phenyl)amino)benzylidene)malononitrile (PMN) and the well-established dye molecule 4-(dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran (DCM) embedded in poly(methyl methacrylate) (PMMA). Polycarbonate was tested as an alternative host material for PMN. The material gain in these dye-doped polymer thin films was determined by the variable stripe length method. The inclusion of concentration quenching in the material gain expression is able to significantly reduce the overestimation of the gain efficiency inherent to a linear model.
The provision of a coherent light source is a prerequisite for a variety of photonic integrated circuits. The integration of semiconductor laser diodes in disposable photonic devices in fields such as biosensing is, however, impeded by the competitive pricing in this application area. In this work, we demonstrate lasing of an alternative laser light source, namely an integrated hybrid organic solid-state distributed feedback laser for a silicon nitride photonic platform. The laser is optically pumped with a high power 450 nm laser diode and emits in the visible at 630 nm into a waveguide taper to reduce the cross-section to a single mode geometry. Inkjet printing of the organic gain medium enables a local, cost-effective, and flexible processing technology. The fabrication of the presented coherent light source is CMOS compatible and therefore highly interesting for co-integrated sensing platforms.