Technology for in-cabin non-contact monitoring of driver vital signs is a growing area of interest for automotive applications. This has been spurred in part by successful demonstrations of remote sensing of human physiological motion using radar, for healthcare applications. However, most reported physiological radar results have focused on the use of continuous wave radar operating between the 2.4 GHz up to 24 GHz, to monitor a single, isolated subject. There is a recent paradigm shift in the automotive radar industry towards the use of W-band frequency modulated continuous wave radar. This research investigates the feasibility of extracting vital signs information for both single and multi-subject scenarios, utilizing a newly developed 76–81 GHz FMCW single channel architecture automotive radar. Chirp parameters and signal processing steps were developed to extract phase information for signals reflected from tiny movement of a subject's chest surface. Beam steering techniques were used to isolate the respiratory signatures for individual subjects from radar signals reflected simultaneously from multiple subjects. Experimental results showed that independent respiratory signatures could be isolated and measured for subjects separated by a 30° angular discrimination limit.
While non-contact monitoring of human respiration has been demonstrated using Doppler radar, the concurrent monitoring of multiple equidistant subjects remains a significant technological challenge. Reported research has so far been limited to maintaining 1-m subject separation, based on the radar antenna beam-width. Proposed here is a hybrid method consisting of an SNR-based intelligent decision algorithm which integrates two different approaches to isolate respiratory signatures of two subjects within the radar beam-width separated by less than 1 meter. Using Independent Component Analysis with the JADE algorithm (ICA-JADE) and Direction of Arrival (DOA), this SNR-based decision algorithm works with an accuracy above 93%. In addition, angular location of each subject is estimated by phase-comparison monopulse and an integrated beam switching capability is demonstrated to optimally extract respiratory information. The proposed method coherently combines two separation methods to overcome multiplesubject monitoring limits which can lead to practical adoption for many respiration monitoring applications.
Non-contact vital signs monitoring using microwave Doppler radar has shown great promise in healthcare applications. Recently, this unobtrusive form of physiological sensing has also been gaining attention for its potential for continuous identity authentication, which can reduce the vulnerability of traditional one-pass validation authentication systems. Physiological Doppler radar is an attractive approach for continuous identity authentication as it requires neither contact nor line-of-sight and does not give rise to privacy concerns associated with video imaging. This paper presents a review of recent advances in radar-based identity authentication systems. It includes an evaluation of the applicability of different research efforts in authentication using respiratory patterns and heart-based dynamics. It also identifies aspects of future research required to address remaining challenges in applying unobtrusive respiration-based or heart-based identity authentication to practical systems. With the advancement of machine learning and artificial intelligence, radar-based continuous authentication can grow to serve a wide range of valuable functions in society.
Modern microwave Doppler radar-based physiological sensing is playing an important role in healthcare applications and during the last decade, there has been a significant advancement in this non-contact respiration sensing technology. The advantages of contactless, unobtrusive respiration monitoring have drawn interest in various medical applications such as sleep apnea, sudden infant death syndromes (SIDS), remote respiratory monitoring of burn victims, and COVID patients. This paper provides a perspective on recent advances in biomedical and healthcare applications of Doppler radar that can detect the tiny movement of the chest surfaces to extract heartbeat and respiration and its associated different vital signs parameters (tidal volume, heart rate variability (HRV), and so on) of the human subject. Additionally, it also highlights the challenges, and opportunities of this remote physiological sensing technology and several future research directions will be laid out to deploy this sensor technology in our day-to-day life.
While Doppler radar can be used to measure cardiopulmonary vital signs during sleep, meaningful diagnostic assessments are often subject to knowledge of a subject's changing sleep posture. The torso Effective Radar Cross Section (ERCS) and displacement magnitude were studied for 20 human subjects in three imitated sleep posture categories using a dual-frequency Doppler radar system in an exploratory examination of the feasibility of using radar to recognize body orientation. Box plot statistical analyses were performed for comparative assessment of ratio variations in ERCS and respiration depth for three different imitated sleep postures. The observed statistical trends and correlations were applied to a physical model to develop posture decision algorithms with initial supine posture data used as a reference. A single-frequency algorithm tracked postures without error for 90% of the subjects using 2.4 GHz data, and 80% using 5.8 GHz data. As accuracy limitations were complementary, a dual-frequency algorithm was developed which recognized postures without error for 100% of the subjects.
Respiration monitoring using microwave Doppler radar has attracted significant interest over the last four decades due to its non-invasive and non-contact form of measurement. However, this technology is still not at the level of practical implementations in healthcare due to motion artifacts and interference from multiple subjects within the range of the Doppler radar sensor. Most reported results in literature focus only on single subject measurements because when multiple subjects are present there are interfering respiration signals which are difficult to separate as individual respiration signals. This paper investigates the feasibility of separating respiratory signatures from the multiple subjects. We employed a new approach using Independent Component Analysis (ICA) with the Joint Approximate Diagonalization of Eignematrices (JADE) algorithm to achieve this for closely spaced subjects, and the system is also capable of estimating Direction of Arrival (DOA) for well-spaced subjects. Experimental results demonstrated that the ICA-JADE method can separate respiratory signatures from two subjects one meter apart from each other at a distance from the radar of 2.89 meters. The separated respiratory pattern closely correlates with reference chest belt respiration patterns, and the mean square error is approximately 11.58%. Concisely, this paper clearly demonstrates that by integrating ICA with the JADE algorithm in a Doppler radar physiological monitoring system, multiple subjects can be monitored simultaneously.