Electric vehicles (EVs) have obtained increasing public interest due to the associated economic and environmental benefits. Recently, studies regarding the economic advantages of adopting EVs as energy storages for commercial/residential buildings are emerging. In fact, according to the U.S. Energy Information Administration, the industrial sector consumes more energy than all of the other sectors combined, which is about 54% of the world’s total delivered energy. The energy consumption pattern in manufacturing facilities is based on production schedules and the heat transfer between machines and the ambient surroundings, thus, differs greatly from commercial/residential buildings. However, little research attention has been given to analyse the synergies of integrating EVs and manufacturing facilities to improve energy efficiency. To fill this research gap, in this study, a comprehensive model is established to evaluate the economic and environmental performance of an energy sharing system that consists of the EVs, power grid, and manufacturing facilities (EPM) under Time-of-Use (TOU) electricity tariff. The model is formulated as a mixed integer nonlinear programming format by considering practical production schedules, heat exchange between machines and ambient surroundings, as well as the heating, ventilation, and air conditioning (HVAC) system. The case study results indicate that the presented EPM energy sharing system has great potential to reduce energy cost and CO2 emissions. In addition, compared to the results from winter scenarios, it is shown that more cost savings can be achieved in summer days.
21 September 2018 in Journal of Manufacturing Systems
Purpose: The purpose of this paper is to present an analytical method for throughput analysis of assembly systems with complex structures during transients. Design/methodology/approach: Among the existing studies on the performance evaluation of assembly systems, most focus on the system performance in steady state. Inspired by the transient analysis of serial production lines, the state transition matrix is derived considering the characteristics of merging structure in assembly systems. The system behavior during transients is described by an ergodic Markov chain, with the states being the occupancy of all buffers. The dynamic model for the throughput analysis is solved using the fixed-point theory. Findings: This method can be used to predict and evaluate the throughput performance of assembly systems in both transient and steady state. By comparing the model calculation results with the simulation results, this method is proved to be accurate. Originality/value: This proposed modeling method can depict the throughput performance of assembly systems in both transient and steady state, whereas most exiting methods can be used for only steady-state analysis. In addition, this method shows the potential for the analysis of complex structured assembly systems owing to the low computational complexity.