Purpose of the Review: Many LiDAR remote sensing studies over the past decade promised data fusion as a potential avenue to increase accuracy, spatial-temporal resolution, and information extraction in the final data products. Here, we performed a structured literature review to analyze relevant studies on these topics published in the last decade and the main motivations and applications for fusion, and the methods used. We discuss the findings with a panel of experts and report important lessons, main challenges, and future directions. Recent Findings: LiDAR fusion with other datasets, including multispectral, hyperspectral, and radar, is found to be useful for a variety of applications in the literature, both at individual tree level and at area level, for tree/crown segmentation, aboveground biomass assessments, canopy height, tree species identification, structural parameters, and fuel load assessments etc. In most cases, gains are achieved in improving the accuracy (e.g. better tree species classifications), and spatial-temporal resolution (e.g. for canopy height). However, questions remain regarding whether the marginal improvements reported in a range of studies are worth the extra investment, specifically from an operational point of view. We also provide a clear definition of “data fusion” to inform the scientific community on data fusion, combination, and integration. Summary: This review provides a positive outlook for LiDAR fusion applications in the decade to come, while raising questions about the trade-off between benefits versus the time and effort needed for collecting and combining multiple datasets.

Ranging techniques such as lidar (LIght Detection And Ranging) and digital stereo‐photogrammetry show great promise for mapping forest canopy height. In this study, we combine these techniques to create hybrid photo‐lidar canopy height models (CHMs). First, photogrammetric digital surface models (DSMs) created using automated stereo‐matching were registered to corresponding lidar digital terrain models (DTMs). Photo‐lidar CHMs were then produced by subtracting the lidar DTM from the photogrammetric DSM. This approach opens up the possibility of retrospective mapping of forest structure using archived aerial photographs. The main objective of the study was to evaluate the accuracy of photo‐lidar CHMs by comparing them to reference lidar CHMs. The assessment revealed that stereo‐matching parameters and left–right image dissimilarities caused by sunlight and viewing geometry have a significant influence on the quality of the photo DSMs. Our study showed that photo‐lidar CHMs are well correlated to their lidar counterparts on a pixel‐wise basis (r up to 0.89 in the best stereo‐matching conditions), but have a lower resolution and accuracy. It also demonstrated that plot metrics extracted from the lidar and photo‐lidar CHMs, such as height at the 95th percentile of 20 m×20 m windows, are highly correlated (r up to 0.95 in general matching conditions).

Our objective was to assess the accuracy of the forest height and biomass estimates derived from an Ikonos stereo pair and a lidar digital terrain model (DTM). After the Ikonos scenes were registered to the DTM with submetric accuracy, tree heights were measured individually by subtracting the photogrammetric elevation of the treetop from the lidar ground‐level elevation of the tree base. The low residual error (1.66 m) of the measurements confirmed the joint geometric accuracy of the combined models. Matched images of the stereo pair were then used to create a digital surface model. The latter was transformed to a canopy height model (CHM) by subtracting the lidar DTM. Plotwise height percentiles were extracted from the Ikonos‐lidar CHM and used to predict the average dominant height and above‐ground biomass. The coefficient of determination reached 0.91 and 0.79 for average height and biomass, respectively. In both cases, the accuracy of the Ikonos‐lidar CHM predictions was slightly lower than that of the all‐lidar reference CHM. Although the CHM heights did not saturate at moderate biomass levels, as do multispectral or radar images, values above 300 Mg ha⁻¹ could not be predicted accurately by the Ikonos‐lidar or by the all‐lidar CHM.

Small footprint full-waveform airborne lidar systems offer large opportunities for improved forest characterization. To take advantage of full-waveform information, this paper presents a new processing method based on the decomposition of waveforms into a sum of parametric functions. The method consists of an enhanced peak detection algorithm combined with advanced echo modelling including Gaussian and generalized Gaussian models. The study focuses on the qualification of the extracted geometric information. Resulting 3D point clouds were compared to the point cloud provided by the operator. 40 to 60% additional points were detected mainly in the lower part of the canopy and in the low vegetation. Their contribution to Digital Terrain Models (DTMs) and Canopy Height Models (CHMs) was then analysed. The quality of DTMs and CHM-based heights was assessed using field measurements on black pine plots under various topographic and stand characteristics. Results showed only slight improvements, up to 5 cm bias and standard deviation reduction. However both tree crowns and undergrowth were more densely sampled thanks to the detection of weak and overlapping echoes, opening up opportunities to study the detailed structure of forest stands.