Ranging techniques such as lidar (LIght Detection And Ranging) and digital stereo‐photogrammetry show great promise for mapping forest canopy height. In this study, we combine these techniques to create hybrid photo‐lidar canopy height models (CHMs). First, photogrammetric digital surface models (DSMs) created using automated stereo‐matching were registered to corresponding lidar digital terrain models (DTMs). Photo‐lidar CHMs were then produced by subtracting the lidar DTM from the photogrammetric DSM. This approach opens up the possibility of retrospective mapping of forest structure using archived aerial photographs. The main objective of the study was to evaluate the accuracy of photo‐lidar CHMs by comparing them to reference lidar CHMs. The assessment revealed that stereo‐matching parameters and left–right image dissimilarities caused by sunlight and viewing geometry have a significant influence on the quality of the photo DSMs. Our study showed that photo‐lidar CHMs are well correlated to their lidar counterparts on a pixel‐wise basis (r up to 0.89 in the best stereo‐matching conditions), but have a lower resolution and accuracy. It also demonstrated that plot metrics extracted from the lidar and photo‐lidar CHMs, such as height at the 95th percentile of 20 m×20 m windows, are highly correlated (r up to 0.95 in general matching conditions).

Our objective was to assess the accuracy of the forest height and biomass estimates derived from an Ikonos stereo pair and a lidar digital terrain model (DTM). After the Ikonos scenes were registered to the DTM with submetric accuracy, tree heights were measured individually by subtracting the photogrammetric elevation of the treetop from the lidar ground‐level elevation of the tree base. The low residual error (1.66 m) of the measurements confirmed the joint geometric accuracy of the combined models. Matched images of the stereo pair were then used to create a digital surface model. The latter was transformed to a canopy height model (CHM) by subtracting the lidar DTM. Plotwise height percentiles were extracted from the Ikonos‐lidar CHM and used to predict the average dominant height and above‐ground biomass. The coefficient of determination reached 0.91 and 0.79 for average height and biomass, respectively. In both cases, the accuracy of the Ikonos‐lidar CHM predictions was slightly lower than that of the all‐lidar reference CHM. Although the CHM heights did not saturate at moderate biomass levels, as do multispectral or radar images, values above 300 Mg ha⁻¹ could not be predicted accurately by the Ikonos‐lidar or by the all‐lidar CHM.

Photogrammetric point clouds (PPC) obtained by stereomatching of aerial photographs now have a resolution sufficient to discern individual trees. We have produced such PPCs of a boreal forest and delineated individual tree crowns using a segmentation algorithm applied to the canopy height model derived from the PPC and a lidar terrain model. The crowns were characterized in terms of height and species (spruce, fir, and deciduous). Species classification used the 3D shape of the single crowns and their reflectance properties. The same was performed on a lidar dataset. Results show that the quality of PPC data generally approaches that of airborne lidar. For pixel-based canopy height models, viewing geometry in aerial images, forest structure (dense vs. open canopies), and composition (deciduous vs. conifers) influenced the quality of the 3D reconstruction of PPCs relative to lidar. Nevertheless, when individual tree height distributions were analyzed, PPC-based results were very similar to those extracted from lidar. The random forest classification (RF) of individual trees performed better in the lidar case when only 3D metrics were used (83% accuracy for lidar, 79% for PPC). However, when 3D and intensity or multispectral data were used together, the accuracy of PPCs (89%) surpassed that of lidar (86%).

Within the managed boreal forest of Quebec (Canada), there is a need to ensure the maintenance of age diversity across the forest resource, and, as a result, fo

Lichen woodlands (LW) are sparse forests that cover extensive areas in remote subarctic regions where warming due to climate change is fastest. They are difficult to study in situ or with airborne remote sensing due to their remoteness. We have tested a method for measuring individual tree heights and predicting basal area at tree and plot levels using WorldView-3 stereo images. Manual stereo measurements of tree heights were performed on short trees (2–12 m) of a LW region of Canada with a residual standard error of ≈0.9 m compared to accurate field or UAV height data. The number of detected trees significantly underestimated field counts, especially in peatlands in which the visual contrast between trees and ground cover was low. The heights measured from the WorldView-3 images were used to predict the basal area at individual tree level and summed up at plot level. In the best conditions (high contrast between trees and ground cover), the relationship to field basal area had a R² of 0.79. Accurate estimates of above ground biomass should therefore also be possible. This method could be used to calibrate an extensive remote sensing approach without in-situ measurements, e.g., by linking precise structural data to ICESAT-2 footprints.