Multifunctional materials have become an important research subject in recent years. Zinc oxide nanoparticles (ZnO NP) deposited on iron oxide (Fe3O4) allow to obtain material with photocatalytic and magnetic properties. The mass share of Fe3O4in the composite was 30%. Saturation magnetization for this sample was about 9.5 emu/g. The use of magnetic material allows to recover the photocatalyst after the photodegradation process and reuse it. The possibility of recovery of Fe3O4nanoparticles with a magnet was estimated at 94.80%, while the recovery of Fe3O4/ZnO achieved 83.91%. The effects of the type of dyes (Methylene Blue, Methyl Orange, Quinoline Yellow, Eriochromic Black T and Trypanic Blue) on their photodegradation efficiency in terms of molar mass of the dye, the solvent in which the processes were carried out and the type of dye charge were investigated. The photocatalytic material showed higher photodegradation activity of dyes while increasing their molar mass. ZnO NPs deposited on Fe3O4 presented 95.61% photocatalytic efficiency against Trypan Blue and 63.02% against Methylene Blue. Increasing the surface area of the catalyst to 39 m2/g and the presence of micro-, meso- and macropores had a positive effect on the sorption process of dyes, especially those of larger sizes, allowing their degradation in the photodegradation process.
Myocardial infarction (MI) is one of the most frequent causes of death in industrialized countries. Stem cells therapy seems to be very promising for regenerative medicine. Skeletal myoblasts transplantation into postinfarction scar has been shown to be effective in the failing heart but shows limitations such, e.g. cell retention and survival. We synthesized and investigated superparamagnetic iron oxide nanoparticles (SPIONs) as an agent for direct cell labeling, which can be used for stem cells imaging. High quality, monodisperse and biocompatible DMSA-coated SPIONs were obtained with thermal decomposition and subsequent ligand exchange reaction. SPIONs’ presence within myoblasts was confirmed by Prussian Blue staining and inductively coupled plasma mass spectrometry (ICP-MS). SPIONs’ influence on tested cells was studied by their proliferation, ageing, differentiation potential and ROS production. Cytotoxicity of obtained nanoparticles and myoblast associated apoptosis were also tested, as well as iron-related and coating-related genes expression. We examined SPIONs’ impact on overexpression of two pro-angiogenic factors introduced via myoblast electroporation method. Proposed SPION-labeling was sufficient to visualize firefly luciferase-modified and SPION-labeled cells with magnetic resonance imaging (MRI) combined with bioluminescence imaging (BLI) in vivo. The obtained results demonstrated a limited SPIONs’ influence on treated skeletal myoblasts, not interfering with basic cell functions.
Bioengineered spider silk is a biomaterial that has exquisite mechanical properties, biocompatibility, and biodegradability. Iron oxide nanoparticles can be applied for the detection and analysis of biomolecules, target drug delivery, as MRI contrast agents and as therapeutic agents for hyperthermia-based cancer treatments. In this study, we investigated three bioengineered silks, MS1, MS2 and EMS2, and their potential to form a composite material with magnetic iron oxide nanoparticles (IONPs). The presence of IONPs did not impede the self-assembly properties of MS1, MS2, and EMS2 silks, and spheres formed. The EMS2 spheres had the highest content of IONPs, and the presence of magnetite IONPs in these carriers was confirmed by several methods such as SEM, EDXS, SQUID, MIP-OES and zeta potential measurement. The interaction of EMS2 and IONPs did not modify the superparamagnetic properties of the IONPs, but it influenced the secondary structure of the spheres. The composite particles exhibited a more than two-fold higher loading efficiency for doxorubicin than the plain EMS2 spheres. For both the EMS2 and EMS2/IONP spheres, the drug revealed a pH-dependent release profile with advantageous kinetics for carriers made of the composite material. The composite spheres can be potentially applied for a combined cancer treatment via hyperthermia and drug delivery.
4 August 2017 in Physical Chemistry Chemical Physics
We have studied the transition between two different magnetization reversal mechanisms for thin Co/Pd multilayers with perpendicular magnetic anisotropy, appearing in magnetic dot and antidot arrays, which were prepared by nanosphere lithography. Various ordered arrays of nanostuctures, both magnetic dots and antidots, were created by varying size and distance between the nanospheres employing RF-plasma etching. We have shown that the coercivity values reach a maximum for the array of antidots with a separation length close to the domain wall width. In this case, each area between three adjacent holes corresponds to a single domain configuration, which can be switched individually. On the contrary, small hole sizes and large volume of material between them results in domain wall propagation throughout the system accompanied by strong domain wall pinning at the holes. We have also shown the impact of edge effects on the magnetic anisotropy energy.
Ordered FePdCu nanoisland arrays were formed by annealing at 600 °C, which caused solid state dewetting of [Cu/Fe/Pd] multilayers deposited on self-assembled SiO 2 nanospheres with a size of 100 nm. A single FePdCu island was formed on the top of each SiO 2 nanosphere. The structure of the obtained system was studied by x-ray diffraction (XRD), while its magnetic properties were studied by SQUID magnetometry. A partially ordered L1 0 alloy appeared in the annealed films, leading to magnetic hardening of the material. The paper presents the influence of the patterning on the system properties. It is shown that templated dewetting is a method providing nanoislands with well-controlled sizes and positions. The role of copper admixture in controlling the structural and magnetic properties is also discussed.