Sebastjan Žagar

Dr. Sebastjan Žagar

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 July 2023 in Materials
Verified
Journal Article
Open access
PDF file
DRDunja Ravnikar
Dunja Ravnikar
RŠRoman Šturm
Roman Šturm
SŽSebastjan Žagar
Sebastjan Žagar
This paper investigated the effect of shot peening on the strength and corrosion properties of 6082-T651 aluminium alloy. The microstructure, surface roughness, microhardness, residual stresses, and corrosion behaviour were investigated and compared with those of untreated aluminium alloy. Cracks and delaminations in the surface layer could only be seen on the treated specimens at a working pressure of 4 bar and 8 bar, while no such effect was observed at a working pressure of 1.6 bar. The surface roughness was increased more than 15 times after shot peening at a working pressure of 8 bar. Shot peening resulted in an increase in microhardness of 27% and a deeper layer with higher compressive residual stresses compared to the untreated specimens. All treated specimens exhibited improved corrosion resistance with a lower degree of anodic dissolution. The current density of the treated specimen with the lowest surface roughness was more than two-fold lower than that of the untreated specimen.

26 April 2021 in Materials
Verified
Journal Article
Open access
PDF file
SŽSebastjan Žagar
Sebastjan Žagar
BMBostjan Markoli
Bostjan Markoli
INIztok Naglič
Iztok Naglič
RŠRoman Šturm
Roman Šturm
The present study investigates the effect of shot peening (SP) on the mechanical properties and surface roughness of 7075 aluminum alloy during different stages and conditions of heat treatment. The mechanical properties were determined by measuring Vickers microhardness profiles and residual stress profiles, while the amount of alloying elements present in the solid solution of the samples under different heat treatment conditions was determined by measuring the electrical conductivity. The results show that the increase in microhardness near the SP surface and the maximum compressive residual stresses are mainly related to the content of alloying elements in the solid solution. Surface roughness increases with increasing SP Almen intensity, and samples with the highest microhardness and residual stresses have the lowest surface roughness.

25 April 2022 in Materials
Verified
Journal Article
Open access
PDF file
SŽSebastjan Žagar
Sebastjan Žagar
PMPrimož Mrvar
Primož Mrvar
Janez GrumJanez Grum
Janez Grum
RŠRoman Šturm
Roman Šturm
This paper investigates the corrosion of shot peened AA7075 aluminium alloys aged at different temperatures. The surface integrity of the hardened layer was evaluated with SEM, EDS, differential scanning calorimetry, hardness, and roughness measurements, and in the end also with corrosion resistance tests. The research results indicated that there were significant differences in precipitates distribution between aluminium alloys artificially aged at different temperatures. As the ageing temperature increases, the microhardness decreases, which influences the final roughness condition of the surface layer after shot peening. The results of potentiodynamic polarisation tests indicate that shot peening enables shifting the pitting potential to positive values, which ensures slightly higher corrosion resistance. SEM images confirmed the dissolution of the aluminium matrix near the separated iron-rich phases of the Alx form (Fe, Mn) by the action of galvanic cells.

20 June 2023 in Preprints.org
Verified
Preprint
Open access
PDF file
DRDunja Ravnikar
Dunja Ravnikar
RŠRoman Šturm
Roman Šturm
SŽSebastjan Žagar
Sebastjan Žagar
This paper investigates the effect of shot peening on the strength and corrosion properties of EN AW 6082-T651 aluminium alloy. Surface roughness, microhardness, residual stresses and corrosion performance were investigated and compared with the untreated aluminium alloy. Cracks and delaminations in the surface layer can only be seen on the treated specimens at a working pressure of 4 bar and 8 bar, while no such effect was observed at a working pressure of 1.6 bar. The effect of dislocation densification was confirmed by the microhardness measurement of the hardened layer, where microhardness increased by up to 23 % compared to the untreated aluminium alloy. Shot peening also results in a deeper layer with higher compressive residual stresses compared to untreated specimens. With higher working pressure, surface roughness increases, which can promote localized pitting corrosion. However, all treated specimens improve the corrosion resistance and have a lower degree of anodic dissolution. The current density of the shot peened specimen with the lowest surface roughness was more than twice lower than that of the untreated specimen.

15 July 2019 in Strojniški vestnik - Journal of Mechanical Engineering
Verified
Journal Article
Closed access
SŽSebastjan Žagar
Sebastjan Žagar
RŠRoman Šturm
Roman Šturm