High-speed supercavitating projectiles receive tremendous hydrodynamic force when flying underwater in tail-slap mode, and have obvious structural deformation and structural vibration. To study the motion characteristics of high-speed supercavitating projectiles, a bidirectional fluid-structure interaction model was established, and validated by comparing with the existing results. The motion, supercavitation flow field, and structural deformation response process of a supercavitating projectile were numerically investigated under the conditions of initial speed within 800–1600 m/s. It was found that the tail-slap motion of high-speed supercavitating projectiles is correlated with a high-frequency structural vibration. Further, the amplitude of the structural vibration increases with the initial speed. When flying with an initial speed higher than 1200 m/s, supercavitating projectiles encounter a great structural deformation under the action of the huge hydrodynamic load, which exerts a significant influence on the motion characteristic, and even destroys the trajectory stability. Thus, the supercavitating projectile cannot be regarded as a rigid body any more, and the structural response effect must be considered.
The performance of the gas–liquid mixture Roots pump at different operating conditions is investigated in this paper. The pump efficiency was first increased from 48% to 64%, and then decreased to 59% with the increased inlet CO2 volume fraction (from 0.8 to 1). The increased rotational speed (from 1000 rpm to 4000 rpm) and pressure ratio (from 2 to 10) can lead to a reduction in the pump’s efficiency from 67% to 43% and from 48% to 33%, respectively. The variation in the pump’s efficiency is affected by the volumetric efficiency and the flow efficiency simultaneously. The high pressure and the CO2 volume fraction in the outlet zone can increase the leakage, leading to a reduction in the volumetric efficiency. The flow efficiency decreases with the increase in the local pressure at the outlet zone and the backflow density. The outlet zone pressure can also affect the fluid properties by changing the density of the gas phase. Therefore, the combined effect of the outlet zone pressure and the working fluid properties is considered to be the main factor affecting the performance. This paper further explores the suitability of Roots pumps for compressing gas–liquid mixtures.
15 June 2020 in Mathematical Problems in Engineering
To predict the hydrodynamic characteristics and supercavity shape of supercavitation flows, the numerical model including VOF, cavitation model, and turbulence models is presented and validated by a well-established empirical correlation. The numerical method is then employed to simulate the high-speed supercavitating vehicles with two different types of control surfaces: bow rudders and stern rudders. The hydrodynamic characteristics and influences on the supercavity are compared. By contrast with the stern rudder, the bow rudder with the same wetted area is capable of generating a larger control force and moment. Also, the bow rudder introduces a considerable deformation to the forepart of the supercavity, while the stern rudder provides a negligible influence on the supercavity before it. In addition, the bow rudder is fully wetted, and the lift force only changes with the rudder angle. However, the stern rudder is partly wetted; the lift force is not only determined by the rudder angle but also related to the actual wetted status.