Use of organic resins such as epoxy and vinyl esters as bonding materials in fibre reinforced polymer (FRP) strengthening of concrete members is widely accepted. However, the performance of organic resins is compromised when exposed to high temperature and extreme weather conditions leading to reduced durability of the strengthened systems. The present study attempts to evaluate the effectiveness of inorganic (cement mortar and geopolymer mortar) bonding materials for shear strengthening of prestressed concrete (PSC) beams using the near-surface mounting (NSM) technique. Different types of bonding materials are used in this study for NSM shear strengthening including: (i) epoxy resin, (ii) high strength cement grout (HSCG) and (iii) geopolymer mortar. Bond tests were first conducted to evaluate the pull-out/bond strength of different bonding materials. Bond tests revealed that epoxy resin had the highest bond strength followed by geopolymer mortar and HSCG. Sixteen full-scale PSC beams were cast with and without stirrups. The beams were strengthened using NSM CFRP laminates oriented at 45-degree configuration and then tested under a three-point bending configuration. Experimental results revealed that the performance of high strength cement grout and geopolymer mortar was similar but with a lesser efficiency compared to the epoxy resin.
Inspection data can be used to comprehend and plan effective maintenance of bridges. In particular, the year of initial construction is one of the most important criteria for formulating maintenance plans, making budget allocations, and estimating soundness. In an initial survey of bridges in Cambodia, it was concluded that the year of construction of only 54% of 2439 bridges surveyed is known, with the remaining 46% remaining unknown. In this research, Landsat satellite data is used to estimate the year of construction of these bridges. Landsat provides spatial spectral reflectance information covering more than 30 years, and for longer bridges this can be used to estimate the year of construction by visual judgement. However, limited image resolution means this is not possible for shorter bridges. Instead, a method using the Landsat Normalized Difference Water Index (NDWI) is used to estimate the year of construction. Three pixels are selected from Landsat image data in such a way that one lies on the current location of a bridge and two other reference pixels are placed on similar terrain at a certain distance perpendicular to the bridge axis. NDWI values are plotted over time for the three pixels and the difference in value between the bridge pixel and the two reference pixels is then compared. Before the bridge is constructed, all three pixels should have similar NDWI values, but after construction the value of the target bridge pixel should differ from the other two because the NDWI value of a bridge surface is different from that of the surrounding vegetation. By looking for this change, the year of construction of a bridge can be estimated. All the bridges in the Cambodian database are classified into three categories based on length (which affects their visibility in Landsat images) and year of construction is estimated. The results show that estimated year of construction has the same accuracy in all three categories.