The sustainability of wind power plants depends on the selection of suitable installation locations, which should consider not only economic and technical factors including manufacturing and raw materials, but also issues pertaining to the environment. In the present study, a novel methodology is proposed to determine the suitable locations for wind turbine farms by analyzing from the environmental perspective. In the methodology, the life cycle assessment (LCA) of wind turbines is incorporated into the decision process. The criteria are ranked using analytical hierarchy process (AHP). The study area is chosen as the western region of Türkiye. The obtained suitability map reveals that wind speed is not the sole criterion for selecting a site for wind turbine farms; other factors, such as bird migration paths, distance from urban areas and land use, are also crucial. The results also reveal that constructing wind power plants in the vicinity of İzmir, Çanakkale, Istanbul, and Balıkesir in Türkiye can lead to a reduction in emissions. İzmir and its surrounding area show the best environmental performance with the lowest CO2 per kilowatt-hour (7.14 g CO2 eq/kWh), to install a wind turbine due to its proximity to the harbor and steel factory across the study area. Çanakkale and the northwest region of Türkiye, despite having high wind speeds, are less environmentally favorable than İzmir, Balıkesir, and Istanbul. The findings of LCA reveal that the nacelle and rotor components of the wind turbine contribute significantly (43–97%) to the environmental impact categories studied, while the tower component (0–36%) also has an impact.
1 January 2024 in International Journal of Energy Research
This study proposes a novel approach to enhance the analytic hierarchy process (AHP) for the selection of suitable sites for solar photovoltaic (PV) farms. This approach is particularly beneficial when it is possible to establish a predefined objective relation in the final weights of the AHP method. The methodology focuses on achieving this predefined relation introducing a systematic revision of the constants of related constraints. In this study, the costs of constructing a unit transmission line and road in the Kayseri Province are objectively related, and the initial constant matrix of the AHP method is iteratively revised until the relation of the final weights converges to the predefined one. The suitability of solar PV farm locations is classified into five classes, revealing approximately 28% (40‐100% of suitability) of the province as favorably suitable and designating about 67% as restricted zones. The findings reveal notable distinctions between the revised weights and those derived from the conventional AHP method. The disparity in weights for various constraints varies from 13.5% to 7.2%. Consequently, the alterations in the area of suitability regions range from 3.4% to 50%. The revision of AHP weights results in a reduction in higher‐suitability areas, coupled with a significant expansion in the region exhibiting lower suitability. Notably, the extent of change in the suitability map increases when the difference in ratios between two criteria obtained from the AHP and the predefined objective relation is high. The proposed method demonstrates its applicability in regions like Kayseri where an objective relation between criteria can be established. Given the inherent subjectivity of the AHP method, the proposed procedure becomes essential to attain more objective weights. Since the methodology objectively adjusts weights based on known ratios, it increases the accuracy and reliability of site selection studies.
31 July 2023 in International Journal of Environmental Science and Technology
In this study, a combination of the smoothed particle hydrodynamics (SPH) and finite element method (FEM) solving the complex problem of interaction between fluid with free surface and an elastic structure is studied. A brief description of SPH and FEM is presented. Contact mechanics is used for the coupling between fluid and structure, which are simulated with SPH and FEM, respectively. In the proposed method, to couple mesh-free and mesh-based methods, fluid and structure are solved together by a complete stiffness matrix instead of iterative predictive–corrective or master–slave methods. In addition, fully dynamic large-deformation analysis is carried out in FEM by taking into account mass and damping of the elastic structure. Accordingly, a two-dimensional fluid–structure interaction (FSI) code is developed and validated with two different experiments available in the literature. The results of the numerical method are in good agreement with the experiments. In addition, a novel laboratory experiment on a dam break problem with elastic gate in which the length of the initial water column is larger than its height is conducted. The main difference between the previous experiments and the one conducted in this study is that an upward water motion parallel to the elastic gate is observed at the upstream side of the gate. This motion is captured with the numerical method.